stm32072b_eval_eeprom.c File Reference

This file provides a set of functions needed to manage a M24LR64 I2C EEPROM memory. More...

#include "stm32072b_eval_eeprom.h"

Go to the source code of this file.

Functions
static uint32_t	EEPROM_I2C_Init (void)
	Initializes peripherals used by the I2C EEPROM driver.
static uint32_t	EEPROM_I2C_ReadBuffer (uint8_t *pBuffer, uint16_t ReadAddr, uint32_t *NumByteToRead)
	Reads a block of data from the I2C EEPROM.
static uint32_t	EEPROM_I2C_WritePage (uint8_t *pBuffer, uint16_t WriteAddr, uint32_t *NumByteToWrite)
	Writes more than one byte to the EEPROM with a single WRITE cycle.
static uint32_t	EEPROM_I2C_WaitEepromStandbyState (void)
	Wait for EEPROM I2C Standby state.
uint32_t	BSP_EEPROM_Init (void)
	Initializes peripherals used by the I2C EEPROM driver.
uint32_t	BSP_EEPROM_ReadBuffer (uint8_t *pBuffer, uint16_t ReadAddr, uint32_t *NumByteToRead)
	Reads a block of data from the EEPROM device selected.
uint32_t	BSP_EEPROM_WriteBuffer (uint8_t *pBuffer, uint16_t WriteAddr, uint32_t NumByteToWrite)
	Writes buffer of data to the EEPROM device selected.
__weak void	BSP_EEPROM_TIMEOUT_UserCallback (void)
	Basic management of the timeout situation.
Variables
__IO uint16_t	EEPROMAddress = 0
__IO uint16_t	EEPROMPageSize = 0
__IO uint16_t	EEPROMDataRead
__IO uint8_t	EEPROMDataWrite
static EEPROM_DrvTypeDef *	EEPROM_SelectedDevice = 0
EEPROM_DrvTypeDef	EEPROM_I2C_Drv

---

Detailed Description

This file provides a set of functions needed to manage a M24LR64 I2C EEPROM memory.

Author:

MCD Application Team =================================================================== Notes:

• This driver is intended for STM32F0xx families devices only.
• The I2C EEPROM memory (M24LR64) is available on separate daughter board ANT7-M24LR-A, which is provided with the STM32072B EVAL board. To use this driver with M24LR64, you have to connect the ANT7-M24LR-A to CN2 connector of STM32072B EVAL board. ===================================================================

It implements a high level communication layer for read and write from/to this memory. The needed STM32F0xx hardware resources (I2C and GPIO) are defined in stm32072b_eval.h file, and the initialization is performed depending of EEPROMs in EEPROM_IO_Init() function declared in stm32072b_eval.c file. You can easily tailor this driver to any other development board, by just adapting the defines for hardware resources and EEPROM_IO_Init() function.

Note:

In this driver, basic read and write functions (BSP_EEPROM_ReadBuffer() and BSP_EEPROM_WriteBuffer()) use Polling mode to perform the data transfer to/from EEPROM memories.

+-----------------------------------------------------------------+ | Pin assignment for M24LR64 EEPROM | +---------------------------------------+-----------+-------------+ | STM32F0xx I2C Pins | EEPROM | Pin | +---------------------------------------+-----------+-------------+ | EEPROM_I2C_SDA_PIN (PB7)/ SDA | SDA | 1 | | . | NC | 2 | | EEPROM_I2C_SCL_PIN/ SCL | SCL | 3 | | EX_RESET(PD7) | RESET | 4 | | . | VDD | 5 | | . | NC | 6 | | . | GND | 7 | | . | NC | 8 | +---------------------------------------+-----------+-------------+

Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32072b_eval_eeprom.c.