8.18. pprint — Data pretty printer

Python 2.7.13

previous page next page

8.18. `pprint` — Data pretty printer

The pprint module provides a capability to “pretty-print” arbitrary Python data structures in a form which can be used as input to the interpreter. If the formatted structures include objects which are not fundamental Python types, the representation may not be loadable. This may be the case if objects such as files, sockets, classes, or instances are included, as well as many other built-in objects which are not representable as Python constants.

The formatted representation keeps objects on a single line if it can, and breaks them onto multiple lines if they don’t fit within the allowed width. Construct PrettyPrinter objects explicitly if you need to adjust the width constraint.

Changed in version 2.5: Dictionaries are sorted by key before the display is computed; before 2.5, a dictionary was sorted only if its display required more than one line, although that wasn’t documented.

Changed in version 2.6: Added support for set and frozenset.

The pprint module defines one class:

class pprint.PrettyPrinter(indent=1, width=80, depth=None, stream=None)

Construct a PrettyPrinter instance. This constructor understands several keyword parameters. An output stream may be set using the stream keyword; the only method used on the stream object is the file protocol’s write() method. If not specified, the PrettyPrinter adopts sys.stdout. Three additional parameters may be used to control the formatted representation. The keywords are indent, depth, and width. The amount of indentation added for each recursive level is specified by indent; the default is one. Other values can cause output to look a little odd, but can make nesting easier to spot. The number of levels which may be printed is controlled by depth; if the data structure being printed is too deep, the next contained level is replaced by .... By default, there is no constraint on the depth of the objects being formatted. The desired output width is constrained using the width parameter; the default is 80 characters. If a structure cannot be formatted within the constrained width, a best effort will be made.

>>> import pprint
>>> stuff = ['spam', 'eggs', 'lumberjack', 'knights', 'ni']
>>> stuff.insert(0, stuff[:])
>>> pp = pprint.PrettyPrinter(indent=4)
>>> pp.pprint(stuff)
[   ['spam', 'eggs', 'lumberjack', 'knights', 'ni'],
    'spam',
    'eggs',
    'lumberjack',
    'knights',
    'ni']
>>> tup = ('spam', ('eggs', ('lumberjack', ('knights', ('ni', ('dead',
... ('parrot', ('fresh fruit',))))))))
>>> pp = pprint.PrettyPrinter(depth=6)
>>> pp.pprint(tup)
('spam', ('eggs', ('lumberjack', ('knights', ('ni', ('dead', (...)))))))

The PrettyPrinter class supports several derivative functions:

pprint.pformat(object, indent=1, width=80, depth=None): Return the formatted representation of object as a string. indent, width and depth will be passed to the PrettyPrinter constructor as formatting parameters.

Changed in version 2.4: The parameters indent, width and depth were added.

pprint.pprint(object, stream=None, indent=1, width=80, depth=None)

Prints the formatted representation of object on stream, followed by a newline. If stream is None, sys.stdout is used. This may be used in the interactive interpreter instead of a print statement for inspecting values. indent, width and depth will be passed to the PrettyPrinter constructor as formatting parameters.

>>> import pprint
>>> stuff = ['spam', 'eggs', 'lumberjack', 'knights', 'ni']
>>> stuff.insert(0, stuff)
>>> pprint.pprint(stuff)
[<Recursion on list with id=...>,
 'spam',
 'eggs',
 'lumberjack',
 'knights',
 'ni']

Changed in version 2.4: The parameters indent, width and depth were added.

pprint.isreadable(object)

Determine if the formatted representation of object is “readable,” or can be used to reconstruct the value using eval(). This always returns False for recursive objects.

>>> pprint.isreadable(stuff)
False

pprint.isrecursive(object): Determine if object requires a recursive representation.

One more support function is also defined:

pprint.saferepr(object)

Return a string representation of object, protected against recursive data structures. If the representation of object exposes a recursive entry, the recursive reference will be represented as <Recursion on typename with id=number>. The representation is not otherwise formatted.

>>> pprint.saferepr(stuff)
"[<Recursion on list with id=...>, 'spam', 'eggs', 'lumberjack', 'knights', 'ni']"

8.18.1. PrettyPrinter Objects

PrettyPrinter instances have the following methods:

PrettyPrinter.pformat(object): Return the formatted representation of object. This takes into account the options passed to the PrettyPrinter constructor.

PrettyPrinter.pprint(object): Print the formatted representation of object on the configured stream, followed by a newline.

The following methods provide the implementations for the corresponding functions of the same names. Using these methods on an instance is slightly more efficient since new PrettyPrinter objects don’t need to be created.

PrettyPrinter.isreadable(object): Determine if the formatted representation of the object is “readable,” or can be used to reconstruct the value using eval(). Note that this returns False for recursive objects. If the depth parameter of the PrettyPrinter is set and the object is deeper than allowed, this returns False.

PrettyPrinter.isrecursive(object): Determine if the object requires a recursive representation.

This method is provided as a hook to allow subclasses to modify the way objects are converted to strings. The default implementation uses the internals of the saferepr() implementation.

PrettyPrinter.format(object, context, maxlevels, level): Returns three values: the formatted version of object as a string, a flag indicating whether the result is readable, and a flag indicating whether recursion was detected. The first argument is the object to be presented. The second is a dictionary which contains the id() of objects that are part of the current presentation context (direct and indirect containers for object that are affecting the presentation) as the keys; if an object needs to be presented which is already represented in context, the third return value should be True. Recursive calls to the format() method should add additional entries for containers to this dictionary. The third argument, maxlevels, gives the requested limit to recursion; this will be 0 if there is no requested limit. This argument should be passed unmodified to recursive calls. The fourth argument, level, gives the current level; recursive calls should be passed a value less than that of the current call.

New in version 2.3.

8.18.2. pprint Example

This example demonstrates several uses of the pprint() function and its parameters.

>>> import pprint
>>> tup = ('spam', ('eggs', ('lumberjack', ('knights', ('ni', ('dead',
... ('parrot', ('fresh fruit',))))))))
>>> stuff = ['a' * 10, tup, ['a' * 30, 'b' * 30], ['c' * 20, 'd' * 20]]
>>> pprint.pprint(stuff)
['aaaaaaaaaa',
 ('spam',
  ('eggs',
   ('lumberjack',
    ('knights', ('ni', ('dead', ('parrot', ('fresh fruit',)))))))),
 ['aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa', 'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbb'],
 ['cccccccccccccccccccc', 'dddddddddddddddddddd']]
>>> pprint.pprint(stuff, depth=3)
['aaaaaaaaaa',
 ('spam', ('eggs', (...))),
 ['aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa', 'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbb'],
 ['cccccccccccccccccccc', 'dddddddddddddddddddd']]
>>> pprint.pprint(stuff, width=60)
['aaaaaaaaaa',
 ('spam',
  ('eggs',
   ('lumberjack',
    ('knights',
     ('ni', ('dead', ('parrot', ('fresh fruit',)))))))),
 ['aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
  'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbb'],
 ['cccccccccccccccccccc', 'dddddddddddddddddddd']]

previous page start next page