Using the Configurable Power-Up Settings Method

When you want to configure a power-up state for your hardware, you can use the Snapshot feature or the configurable power-up method. To use the configurable power-up method, follow these steps:

1. Select the module under Devices and Interfaces or Remote Systems and click the Channel Configuration tab.
2. Fill in power-up output values for the channels you want to configure.
3. Click Apply.
   
   When you click Apply, the attributes, ranges, deadband, and network watchdog values are sent to the devices to be used as the current settings and power-up settings. Power-up attributes and ranges are always the same as the current attributes and ranges. The power-up output values are sent to the device to be used whenever a reset or power cycle occurs.
4. Select the bank for the device.

   Note  Make sure the factory configuration box is unchecked before you click Apply.

5. On the Bank Configuration tab, click Apply.
6. Click Save.