The following clarifications are to be noted for use of the MRF24W with Microchip TCPIP Stack versions unless otherwise noted.
For topics not addressed in this documentation, search 
Microchip Technical Support Knowledgebase.
Module
Topics
|
Name |
Description |
|
Describes how to handle null string ESSID | |
|
Describes how to read back RF module firmware version | |
|
Describes how to update MRF24WB0M/MRF24WG0M RF module firmware | |
|
Describes MRF24WG0M WPS Issues | |
|
Describes how to perform a network switch or change | |
|
Describes the MRF24W RF module Hibernate Mode software flow | |
|
Describes how to handle management scan message conflict | |
|
Describes how to handle maximum length SSID | |
|
Describes considerations for hardware and software Multicast filters. | |
|
In WiFi console demo, using MRF24WB0M and certain sequences (wrong pass-phrase), <iwconfig scan> command can produce assert failures. | |
|
Describes why MRF24WB0M shows advertised supported rates of 1, 2, 5.5 and 11 Mbps | |
|
Describes MRF24WB0M compatibility with AP/Routers | |
|
Describes new "gRFModuleVer1209orLater" APIs | |
|
Describes how to fix the transmission rates of MRF24W | |
|
Describes how to determine new IP address being assigned to MRF24W by a DHCP server | |
|
Describes the various methods to increase TCP throughput | |
|
Describes the software fixes to display DHCP client name | |
|
List of error messages and the possible causes |