- Before attaching the PIM to the Explorer 16 board, insure that the processor selector switch (S2) is in the “PIM” position as seen in the image below.
- Short the J7 jumper to the “PIC24” setting:
- Be careful while inserting the appropriate PIM into Exp 16 board. Insure that no pins are bent or damaged during the process. Also insure that the PIM is not shifted in any direction and that all of the headers are properly aligned.
- On the SD Card PICTail™ Plus board, short JP1, JP2, and JP3 on the side farthest from the SD Card holder. Depending on the revision of the board you have the silk-screen on the board may incorrectly label the top as the “HPC-EXP” setting. Please ignore this silk screen and place the jumpers as described above and seen below.
- Insert the J2 slot of SD Card PICTail™ Plus Daughter Card into J5 port of Explorer 16 board. Make sure that the SD Card Connector is facing towards the Explorer 16 board. Insert the SD Card in SD Card PICTail™ Plus Daughter board.