Configuration:Measurement Options:DC Noise Rejection Property
Short Name: DC Noise Rejection
Property of niDMM
Specifies the DC noise rejection mode.
 |
Note The NI 4050 and NI 4060 are not supported. |
| Auto (-1) |
The driver chooses the DC noise rejection setting based on the configured function and resolution. |
||
| Normal (0) |
NI-DMM weighs all samples equally. |
||
| Second Order (1) |
NI-DMM weighs the samples taken in the middle of the aperture time more than samples taken at the beginning and the end of the measurement using a triangular weighing function. |
||
| High Order (2) |
NI-DMM weighs the samples taken in the middle of the aperture time more than samples taken at the beginning and the end of the measurement using a bell-curve weighing function.
|
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | No |