1. Overview
1.1 Scope
This document describes how to use. NET Micro Framework (NETMF) with SH7216 RSK board. This document mainly describes how to setup, build and run SH7216_RSK solution available in the porting kit. This document also describes how to create, build, deploy and run NETMF based applications on SH7216 RSK board using Microsoft visual studio.
1.2 Required Target System
- SH7216 RSK Board
Please go through the hardware user manual of the SH7216 board before power ON and working with the board.
1.3 Supported Driver
- Serial
- Timer & Power
- Internal Flash
In addition, we may be having other drivers. If needed, please contact us.
1.4 Supported Projects
Following projects are supported.
- NativeSample
- TinyCLR
Following projects are not supported.
- Portbooter
- Tinybooter
However, these projects can be build properly so if needed you can customize them.
1.5 Requirements
- Host system (Windows XP in this documentation)
- Target System (SH7216 RSK Board)
- Microsoft Visual Studio 2010
- E10A-USB Emulator for SH2A and installation setup.
- C/C++ Compiler Package for SuperH RISC engine family
- .NET Micro framework porting kit (MicroFrameworkPK.msi)
- .NET Micro framework development kit (MicroFrameworkSDK.MSI)
- .NETMF Solution “SH7216_RSK” (included in the porting kit)
- NULL modem cable (Serial cable)
- Tera Term Pro or another serial program.