|
STM32L4xx_Nucleo_144 BSP User Manual
|
Functions | |
| void | BSP_LED_Init (Led_TypeDef Led) |
| Configure LED GPIO. | |
| void | BSP_LED_DeInit (Led_TypeDef Led) |
| DeInitialize LEDs. | |
| void | BSP_LED_On (Led_TypeDef Led) |
| Turn selected LED On. | |
| void | BSP_LED_Off (Led_TypeDef Led) |
| Turn selected LED Off. | |
| void | BSP_LED_Toggle (Led_TypeDef Led) |
| Toggle the selected LED. | |
Function Documentation
| void BSP_LED_DeInit | ( | Led_TypeDef | Led | ) |
DeInitialize LEDs.
- Parameters:
-
Led,: LED to be de-init. This parameter can be one of the following values: - LED1
- LED2
- LED3
- Note:
- BSP_LED_DeInit() does not disable the GPIO clock
- Return values:
-
None
Definition at line 217 of file stm32l4xx_nucleo_144.c.
| void BSP_LED_Init | ( | Led_TypeDef | Led | ) |
Configure LED GPIO.
- Parameters:
-
Led,: Specifies the Led to be configured. This parameter can be one of following parameters: - LED1
- LED2
- LED3
- Return values:
-
None
Definition at line 190 of file stm32l4xx_nucleo_144.c.
References GPIO_PIN, GPIO_PORT, and LEDx_GPIO_CLK_ENABLE.
| void BSP_LED_Off | ( | Led_TypeDef | Led | ) |
Turn selected LED Off.
- Parameters:
-
Led,: Specifies the Led to be set off. This parameter can be one of following parameters: - LED1
- LED2
- LED3
- Return values:
-
None
Definition at line 251 of file stm32l4xx_nucleo_144.c.
| void BSP_LED_On | ( | Led_TypeDef | Led | ) |
Turn selected LED On.
- Parameters:
-
Led,: Specifies the Led to be set on. This parameter can be one of following parameters: - LED1
- LED2
- LED3
- Return values:
-
None
Definition at line 237 of file stm32l4xx_nucleo_144.c.
| void BSP_LED_Toggle | ( | Led_TypeDef | Led | ) |
Toggle the selected LED.
- Parameters:
-
Led,: Specifies the Led to be toggled. This parameter can be one of following parameters: - LED1
- LED2
- LED3
- Return values:
-
None
Definition at line 265 of file stm32l4xx_nucleo_144.c.
Generated on Mon Oct 9 2017 01:35:13 for STM32L4xx_Nucleo_144 BSP User Manual by
1.7.6.1