|
STM32L1xx_Nucleo BSP User Manual
|
Defines | |
| #define | NUCLEO_SPIx SPI1 |
| #define | NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() |
| #define | NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1 |
| #define | NUCLEO_SPIx_SCK_GPIO_PORT GPIOA |
| #define | NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 |
| #define | NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1 |
| #define | NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA |
| #define | NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 |
| #define | NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 |
| #define | NUCLEO_SPIx_TIMEOUT_MAX 1000 |
| #define | SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) |
| SD Control Lines management. | |
| #define | SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) |
| #define | LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) |
| LCD Control Lines management. | |
| #define | LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) |
| #define | LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) |
| #define | LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) |
| #define | SD_CS_PIN GPIO_PIN_5 |
| SD Control Interface pins (shield D4) | |
| #define | SD_CS_GPIO_PORT GPIOB |
| #define | SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | LCD_CS_PIN GPIO_PIN_6 |
| LCD Control Interface pins (shield D10) | |
| #define | LCD_CS_GPIO_PORT GPIOB |
| #define | LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | LCD_DC_PIN GPIO_PIN_9 |
| LCD Data/Command Interface pins. | |
| #define | LCD_DC_GPIO_PORT GPIOA |
| #define | LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | NUCLEO_ADCx ADC1 |
| ADC Interface pins used to detect motion of Joystick available on Adafruit 1.8 TFT shield. | |
| #define | NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC1_CLK_ENABLE() |
| #define | NUCLEO_ADCx_CLK_DISABLE() __HAL_RCC_ADC1_CLK_DISABLE() |
| #define | NUCLEO_ADCx_GPIO_PORT GPIOB |
| #define | NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 |
| #define | NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
Define Documentation
| #define LCD_CS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 208 of file stm32l1xx_nucleo.h.
| #define LCD_CS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 207 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init().
| #define LCD_CS_GPIO_PORT GPIOB |
Definition at line 206 of file stm32l1xx_nucleo.h.
| #define LCD_CS_HIGH | ( | ) | HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) |
Definition at line 190 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init(), LCD_IO_WriteMultipleData(), LCD_IO_WriteReg(), and SD_IO_Init().
| #define LCD_CS_LOW | ( | ) | HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) |
LCD Control Lines management.
Definition at line 189 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_WriteMultipleData(), and LCD_IO_WriteReg().
| #define LCD_CS_PIN GPIO_PIN_6 |
LCD Control Interface pins (shield D10)
Definition at line 205 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init(), and SD_IO_Init().
| #define LCD_DC_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 216 of file stm32l1xx_nucleo.h.
| #define LCD_DC_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 215 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init().
| #define LCD_DC_GPIO_PORT GPIOA |
Definition at line 214 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init().
| #define LCD_DC_HIGH | ( | ) | HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) |
Definition at line 192 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_WriteMultipleData().
| #define LCD_DC_LOW | ( | ) | HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) |
Definition at line 191 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_WriteReg().
| #define LCD_DC_PIN GPIO_PIN_9 |
LCD Data/Command Interface pins.
Definition at line 213 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init().
| #define NUCLEO_ADCx ADC1 |
ADC Interface pins used to detect motion of Joystick available on Adafruit 1.8 TFT shield.
Definition at line 223 of file stm32l1xx_nucleo.h.
Referenced by ADCx_DeInit(), and ADCx_Init().
| #define NUCLEO_ADCx_CLK_DISABLE | ( | ) | __HAL_RCC_ADC1_CLK_DISABLE() |
Definition at line 225 of file stm32l1xx_nucleo.h.
Referenced by ADCx_MspDeInit().
| #define NUCLEO_ADCx_CLK_ENABLE | ( | ) | __HAL_RCC_ADC1_CLK_ENABLE() |
Definition at line 224 of file stm32l1xx_nucleo.h.
Referenced by ADCx_MspInit().
| #define NUCLEO_ADCx_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 230 of file stm32l1xx_nucleo.h.
| #define NUCLEO_ADCx_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 229 of file stm32l1xx_nucleo.h.
Referenced by ADCx_MspInit().
| #define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 |
Definition at line 228 of file stm32l1xx_nucleo.h.
Referenced by ADCx_MspDeInit(), and ADCx_MspInit().
| #define NUCLEO_ADCx_GPIO_PORT GPIOB |
Definition at line 227 of file stm32l1xx_nucleo.h.
Referenced by ADCx_MspDeInit(), and ADCx_MspInit().
| #define NUCLEO_SPIx SPI1 |
Definition at line 157 of file stm32l1xx_nucleo.h.
Referenced by SPIx_Init().
| #define NUCLEO_SPIx_CLK_ENABLE | ( | ) | __HAL_RCC_SPI1_CLK_ENABLE() |
Definition at line 158 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1 |
Definition at line 166 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 169 of file stm32l1xx_nucleo.h.
| #define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 168 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA |
Definition at line 167 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 |
Definition at line 170 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 |
Definition at line 171 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1 |
Definition at line 160 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 164 of file stm32l1xx_nucleo.h.
| #define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 163 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA |
Definition at line 161 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 |
Definition at line 162 of file stm32l1xx_nucleo.h.
Referenced by SPIx_MspInit().
| #define NUCLEO_SPIx_TIMEOUT_MAX 1000 |
Definition at line 177 of file stm32l1xx_nucleo.h.
| #define SD_CS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 200 of file stm32l1xx_nucleo.h.
| #define SD_CS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 199 of file stm32l1xx_nucleo.h.
Referenced by SD_IO_Init().
| #define SD_CS_GPIO_PORT GPIOB |
Definition at line 198 of file stm32l1xx_nucleo.h.
Referenced by LCD_IO_Init(), and SD_IO_Init().
| #define SD_CS_HIGH | ( | ) | HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) |
Definition at line 184 of file stm32l1xx_nucleo.h.
Referenced by SD_IO_CSState(), and SD_IO_Init().
| #define SD_CS_LOW | ( | ) | HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) |
SD Control Lines management.
Definition at line 183 of file stm32l1xx_nucleo.h.
Referenced by SD_IO_CSState().
| #define SD_CS_PIN GPIO_PIN_5 |
SD Control Interface pins (shield D4)
Definition at line 197 of file stm32l1xx_nucleo.h.
Referenced by SD_IO_Init().
Generated on Sun Apr 16 2017 21:55:49 for STM32L1xx_Nucleo BSP User Manual by
1.7.6.1