STM32F723E-Discovery BSP User Manual
|
This file contains the common defines and functions prototypes for the stm32f723e_discovery_qspi.c driver. More...
#include "stm32f7xx_hal.h"
#include "../Components/mx25l512/mx25l512.h"
Go to the source code of this file.
Data Structures | |
struct | QSPI_Info |
Defines | |
#define | QSPI_OK ((uint8_t)0x00) |
#define | QSPI_ERROR ((uint8_t)0x01) |
#define | QSPI_BUSY ((uint8_t)0x02) |
#define | QSPI_NOT_SUPPORTED ((uint8_t)0x04) |
#define | QSPI_SUSPENDED ((uint8_t)0x08) |
#define | QSPI_CLK_ENABLE() __HAL_RCC_QSPI_CLK_ENABLE() |
#define | QSPI_CLK_DISABLE() __HAL_RCC_QSPI_CLK_DISABLE() |
#define | QSPI_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | QSPI_CLK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | QSPI_D0_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | QSPI_D1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | QSPI_D2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
#define | QSPI_D3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
#define | QSPI_FORCE_RESET() __HAL_RCC_QSPI_FORCE_RESET() |
#define | QSPI_RELEASE_RESET() __HAL_RCC_QSPI_RELEASE_RESET() |
#define | QSPI_CS_PIN GPIO_PIN_6 |
#define | QSPI_CS_GPIO_PORT GPIOB |
#define | QSPI_CS_PIN_AF GPIO_AF10_QUADSPI |
#define | QSPI_CLK_PIN GPIO_PIN_2 |
#define | QSPI_CLK_GPIO_PORT GPIOB |
#define | QSPI_CLK_PIN_AF GPIO_AF9_QUADSPI |
#define | QSPI_D0_PIN GPIO_PIN_9 |
#define | QSPI_D0_GPIO_PORT GPIOC |
#define | QSPI_D0_PIN_AF GPIO_AF9_QUADSPI |
#define | QSPI_D1_PIN GPIO_PIN_10 |
#define | QSPI_D1_GPIO_PORT GPIOC |
#define | QSPI_D1_PIN_AF GPIO_AF9_QUADSPI |
#define | QSPI_D2_PIN GPIO_PIN_2 |
#define | QSPI_D2_GPIO_PORT GPIOE |
#define | QSPI_D2_PIN_AF GPIO_AF9_QUADSPI |
#define | QSPI_D3_PIN GPIO_PIN_13 |
#define | QSPI_D3_GPIO_PORT GPIOD |
#define | QSPI_D3_PIN_AF GPIO_AF9_QUADSPI |
Functions | |
uint8_t | BSP_QSPI_Init (void) |
Initializes the QSPI interface. | |
uint8_t | BSP_QSPI_DeInit (void) |
De-Initializes the QSPI interface. | |
uint8_t | BSP_QSPI_Read (uint8_t *pData, uint32_t ReadAddr, uint32_t Size) |
Reads an amount of data from the QSPI memory. | |
uint8_t | BSP_QSPI_Write (uint8_t *pData, uint32_t WriteAddr, uint32_t Size) |
Writes an amount of data to the QSPI memory. | |
uint8_t | BSP_QSPI_Erase_Block (uint32_t BlockAddress) |
Erases the specified block of the QSPI memory. | |
uint8_t | BSP_QSPI_Erase_Chip (void) |
Erases the entire QSPI memory. | |
uint8_t | BSP_QSPI_GetStatus (void) |
Reads current status of the QSPI memory. | |
uint8_t | BSP_QSPI_GetInfo (QSPI_Info *pInfo) |
Return the configuration of the QSPI memory. | |
uint8_t | BSP_QSPI_EnableMemoryMappedMode (void) |
Configure the QSPI in memory-mapped mode. | |
void | BSP_QSPI_MspInit (QSPI_HandleTypeDef *hqspi, void *Params) |
QSPI MSP Initialization This function configures the hardware resources used in this example: | |
void | BSP_QSPI_MspDeInit (QSPI_HandleTypeDef *hqspi, void *Params) |
QSPI MSP De-Initialization This function frees the hardware resources used in this example: |
Detailed Description
This file contains the common defines and functions prototypes for the stm32f723e_discovery_qspi.c driver.
- Attention:
© COPYRIGHT(c) 2016 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f723e_discovery_qspi.h.
Generated on Mon Jan 2 2017 09:52:50 for STM32F723E-Discovery BSP User Manual by 1.7.6.1