stm32f723e_discovery.h File Reference

This file contains definitions for STM32F723E-Discovery LEDs, push-buttons hardware resources. More...

#include "stm32f7xx_hal.h"

Go to the source code of this file.

Defines
#define	BUTTON_USER   BUTTON_WAKEUP
#define	LEDn   ((uint8_t)2)
#define	LED5_GPIO_PORT   ((GPIO_TypeDef*)GPIOA)
#define	LED6_GPIO_PORT   ((GPIO_TypeDef*)GPIOB)
#define	LED5_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	LED6_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
#define	LED5_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	LED6_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOB_CLK_DISABLE()
#define	LEDx_GPIO_CLK_ENABLE(__INDEX__)
#define	LEDx_GPIO_CLK_DISABLE(__INDEX__)
#define	LED5_PIN   ((uint32_t)GPIO_PIN_7)
#define	LED6_PIN   ((uint32_t)GPIO_PIN_1)
#define	BUTTONn   ((uint8_t)1)
#define	WAKEUP_BUTTON_PIN   GPIO_PIN_0
	Wakeup push-button.
#define	WAKEUP_BUTTON_GPIO_PORT   GPIOA
#define	WAKEUP_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	WAKEUP_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	WAKEUP_BUTTON_EXTI_IRQn   EXTI0_IRQn
#define	USER_BUTTON_PIN   WAKEUP_BUTTON_PIN
#define	USER_BUTTON_GPIO_PORT   WAKEUP_BUTTON_GPIO_PORT
#define	USER_BUTTON_GPIO_CLK_ENABLE()   WAKEUP_BUTTON_GPIO_CLK_ENABLE()
#define	USER_BUTTON_GPIO_CLK_DISABLE()   WAKEUP_BUTTON_GPIO_CLK_DISABLE()
#define	USER_BUTTON_EXTI_IRQn   WAKEUP_BUTTON_EXTI_IRQn
#define	BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	OTG_HS_OVER_CURRENT_PIN   GPIO_PIN_10
	USB OTG HS Over Current signal.
#define	OTG_HS_OVER_CURRENT_PORT   GPIOH
#define	OTG_HS_OVER_CURRENT_PORT_CLK_ENABLE()   __HAL_RCC_GPIOH_CLK_ENABLE()
#define	OTG_FS_OVER_CURRENT_PIN   GPIO_PIN_8
	USB OTG FS Over Current signal.
#define	OTG_FS_OVER_CURRENT_PORT   GPIOC
#define	OTG_FS_OVER_CURRENT_PORT_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	TS_INT_PIN   ((uint32_t)GPIO_PIN_9)
	TS_INT signal from TouchScreen.
#define	TS_INT_GPIO_PORT   ((GPIO_TypeDef*)GPIOI)
#define	TS_INT_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOI_CLK_ENABLE()
#define	TS_INT_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOI_CLK_DISABLE()
#define	TS_INT_EXTI_IRQn   EXTI9_5_IRQn
#define	TS_RESET_PIN   GPIO_PIN_9
	TS RESET pin.
#define	TS_RESET_GPIO_PORT   GPIOH
#define	TS_RESET_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOH_CLK_ENABLE()
#define	TS_RESET_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOH_CLK_DISABLE()
#define	TS_RESET_EXTI_IRQn   EXTI15_10_IRQn
#define	TS_I2Cx   I2C3
	Definition for I2C3 Touchscreen Pins resources (touchescreen).
#define	TS_I2Cx_CLK_ENABLE()   __HAL_RCC_I2C3_CLK_ENABLE()
#define	TS_I2Cx_SCL_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	TS_I2Cx_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOH_CLK_ENABLE()
#define	TS_I2Cx_FORCE_RESET()   __HAL_RCC_I2C3_FORCE_RESET()
#define	TS_I2Cx_RELEASE_RESET()   __HAL_RCC_I2C3_RELEASE_RESET()
#define	TS_I2Cx_SCL_PIN   GPIO_PIN_8
	Definition for Touchscreen Pins.
#define	TS_I2Cx_SCL_AF   GPIO_AF4_I2C3
#define	TS_I2Cx_SCL_GPIO_PORT   GPIOA
#define	TS_I2Cx_SDA_PIN   GPIO_PIN_8
#define	TS_I2Cx_SDA_AF   GPIO_AF4_I2C3
#define	TS_I2Cx_SDA_GPIO_PORT   GPIOH
#define	TS_I2Cx_EV_IRQn   I2C3_EV_IRQn
#define	TS_I2Cx_ER_IRQn   I2C3_ER_IRQn
#define	TS_I2C_ADDRESS   ((uint16_t)0x70)
	TouchScreen FT6206 Slave I2C address.
#define	COMn   ((uint8_t)1)
#define	DISCOVERY_COM1   USART2
	Definition for COM port1, connected to USART2.
#define	DISCOVERY_COM1_CLK_ENABLE()   __HAL_RCC_USART2_CLK_ENABLE()
#define	DISCOVERY_COM1_CLK_DISABLE()   __HAL_RCC_USART2_CLK_DISABLE()
#define	DISCOVERY_COM1_TX_PIN   GPIO_PIN_3
#define	DISCOVERY_COM1_TX_GPIO_PORT   GPIOA
#define	DISCOVERY_COM1_TX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	DISCOVERY_COM1_TX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	DISCOVERY_COM1_TX_AF   GPIO_AF7_USART2
#define	DISCOVERY_COM1_RX_PIN   GPIO_PIN_2
#define	DISCOVERY_COM1_RX_GPIO_PORT   GPIOA
#define	DISCOVERY_COM1_RX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	DISCOVERY_COM1_RX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	DISCOVERY_COM1_RX_AF   GPIO_AF7_USART2
#define	DISCOVERY_COM1_IRQn   USART2_IRQn
#define	DISCOVERY_COMx_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();} } while(0)
#define	DISCOVERY_COMx_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0)
#define	DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();} } while(0)
#define	DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define	DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();} } while(0)
#define	DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0)
#define	AUDIO_I2C_ADDRESS   ((uint16_t)0x34)
	Audio I2C Slave address.
#define	DISCOVERY_AUDIO_I2Cx   I2C1
	User can use this section to tailor I2C1 instance used and associated resources (audio codec).
#define	DISCOVERY_AUDIO_I2Cx_CLK_ENABLE()   __HAL_RCC_I2C1_CLK_ENABLE()
#define	DISCOVERY_AUDIO_I2Cx_SCL_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
#define	DISCOVERY_AUDIO_I2Cx_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
#define	DISCOVERY_AUDIO_I2Cx_FORCE_RESET()   __HAL_RCC_I2C1_FORCE_RESET()
#define	DISCOVERY_AUDIO_I2Cx_RELEASE_RESET()   __HAL_RCC_I2C1_RELEASE_RESET()
#define	DISCOVERY_AUDIO_I2Cx_SCL_PIN   GPIO_PIN_8
	Definition for I2C1 Pins.
#define	DISCOVERY_AUDIO_I2Cx_SCL_AF   GPIO_AF4_I2C1
#define	DISCOVERY_AUDIO_I2Cx_SCL_GPIO_PORT   GPIOB
#define	DISCOVERY_AUDIO_I2Cx_SDA_PIN   GPIO_PIN_9
#define	DISCOVERY_AUDIO_I2Cx_SDA_AF   GPIO_AF4_I2C1
#define	DISCOVERY_AUDIO_I2Cx_SDA_GPIO_PORT   GPIOB
#define	DISCOVERY_AUDIO_I2Cx_EV_IRQn   I2C1_EV_IRQn
	Definition of I2C1 interrupt requests.
#define	DISCOVERY_AUDIO_I2Cx_ER_IRQn   I2C1_ER_IRQn
#define	DISCOVERY_EXT_I2Cx   I2C2
#define	DISCOVERY_EXT_I2Cx_CLK_ENABLE()   __HAL_RCC_I2C2_CLK_ENABLE()
#define	DISCOVERY_EXT_DMAx_CLK_ENABLE()   __HAL_RCC_DMA1_CLK_ENABLE()
#define	DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOH_CLK_ENABLE()
#define	DISCOVERY_EXT_I2Cx_FORCE_RESET()   __HAL_RCC_I2C2_FORCE_RESET()
#define	DISCOVERY_EXT_I2Cx_RELEASE_RESET()   __HAL_RCC_I2C2_RELEASE_RESET()
#define	DISCOVERY_EXT_I2Cx_SCL_PIN   GPIO_PIN_4
#define	DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT   GPIOH
#define	DISCOVERY_EXT_I2Cx_SCL_SDA_AF   GPIO_AF4_I2C2
#define	DISCOVERY_EXT_I2Cx_SDA_PIN   GPIO_PIN_5
#define	DISCOVERY_EXT_I2Cx_EV_IRQn   I2C2_EV_IRQn
#define	DISCOVERY_EXT_I2Cx_ER_IRQn   I2C2_ER_IRQn
Enumerations
enum	Led_TypeDef { LED5 = 0, LED_RED = LED5, LED6 = 1, LED_GREEN = LED6 }
	Define for STM32F723E_DISCOVERY board. More...
enum	Button_TypeDef { BUTTON_WAKEUP = 0 }
	Button_TypeDef STM32F723E_Discovery board Buttons definitions. More...
enum	ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }
	ButtonMode_TypeDef STM32F723E_Discovery board Buttons Modes definitions. More...
enum	ButtonValue_TypeDef { PB_SET = 0, PB_RESET = !PB_SET }
enum	COM_TypeDef { COM1 = 0 }
enum	DISCO_Status_TypeDef { DISCO_OK = 0, DISCO_ERROR = 1 }
	DISCO_Status_TypeDef STM32F723E_DISCO board Status return possible values. More...
Functions
uint32_t	BSP_GetVersion (void)
	This method returns the STM32F723E Discovery BSP Driver revision.
void	BSP_LED_Init (Led_TypeDef Led)
	Configures LED GPIO.
void	BSP_LED_DeInit (Led_TypeDef Led)
	DeInit LEDs.
void	BSP_LED_On (Led_TypeDef Led)
	Turns selected LED On.
void	BSP_LED_Off (Led_TypeDef Led)
	Turns selected LED Off.
void	BSP_LED_Toggle (Led_TypeDef Led)
	Toggles the selected LED.
void	BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
	Configures button GPIO and EXTI Line.
void	BSP_PB_DeInit (Button_TypeDef Button)
	Push Button DeInit.
uint32_t	BSP_PB_GetState (Button_TypeDef Button)
	Returns the selected button state.
void	BSP_COM_Init (COM_TypeDef COM, UART_HandleTypeDef *huart)
	Configures COM port.
void	BSP_COM_DeInit (COM_TypeDef COM, UART_HandleTypeDef *huart)
	DeInit COM port.

---

Detailed Description

This file contains definitions for STM32F723E-Discovery LEDs, push-buttons hardware resources.

Author:

MCD Application Team

Version:

V1.0.0

Date:

30-December-2016

Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f723e_discovery.h.