STM32F4xx-Nucleo BSP User Manual: stm32f4xx_nucleo.c File Reference

STM32F4xx Nucleo BSP Drivers

stm32f4xx_nucleo.c File Reference

This file provides set of firmware functions to manage: More...

#include "stm32f4xx_nucleo.h"

Go to the source code of this file.

Defines

#define __STM32F4xx_NUCLEO_BSP_VERSION_MAIN   (0x01)
 STM32F4xx NUCLEO BSP Driver version number V1.2.6.
#define __STM32F4xx_NUCLEO_BSP_VERSION_SUB1   (0x02)
#define __STM32F4xx_NUCLEO_BSP_VERSION_SUB2   (0x06)
#define __STM32F4xx_NUCLEO_BSP_VERSION_RC   (0x00)
#define __STM32F4xx_NUCLEO_BSP_VERSION
#define SD_DUMMY_BYTE   0xFF
 LINK SD Card.
#define SD_NO_RESPONSE_EXPECTED   0x80

Functions

static void SPIx_Init (void)
 Initializes SPI HAL.
static void SPIx_Write (uint8_t Value)
 SPI Write a byte to device.
static void SPIx_WriteReadData (const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLegnth)
 SPI Write a byte to device.
static void SPIx_Error (void)
 SPI error treatment function.
static void SPIx_MspInit (SPI_HandleTypeDef *hspi)
 Initializes SPI MSP.
void SD_IO_Init (void)
 Initializes the SD Card and put it into StandBy State (Ready for data transfer).
void SD_IO_CSState (uint8_t val)
 Set the SD_CS pin.
void SD_IO_WriteReadData (const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength)
 Write a byte on the SD.
uint8_t SD_IO_WriteByte (uint8_t Data)
 Writes a byte on the SD.
void LCD_IO_Init (void)
 Initializes the LCD.
void LCD_IO_WriteData (uint8_t Data)
 Writes data to select the LCD register.
void LCD_IO_WriteMultipleData (uint8_t *pData, uint32_t Size)
 Writes register value.
void LCD_IO_WriteReg (uint8_t LCDReg)
 Writes command to select the LCD register.
void LCD_Delay (uint32_t Delay)
 Wait for loop in ms.
static void ADCx_Init (void)
 Initializes ADC HAL.
static void ADCx_DeInit (void)
 Initializes ADC HAL.
static void ADCx_MspInit (ADC_HandleTypeDef *hadc)
 Initializes ADC MSP.
static void ADCx_MspDeInit (ADC_HandleTypeDef *hadc)
 DeInitializes ADC MSP.
uint32_t BSP_GetVersion (void)
 This method returns the STM32F4xx NUCLEO BSP Driver revision.
void BSP_LED_Init (Led_TypeDef Led)
 Configures LED GPIO.
void BSP_LED_DeInit (Led_TypeDef Led)
 DeInit LEDs.
void BSP_LED_On (Led_TypeDef Led)
 Turns selected LED On.
void BSP_LED_Off (Led_TypeDef Led)
 Turns selected LED Off.
void BSP_LED_Toggle (Led_TypeDef Led)
 Toggles the selected LED.
void BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
 Configures Button GPIO and EXTI Line.
void BSP_PB_DeInit (Button_TypeDef Button)
 Push Button DeInit.
uint32_t BSP_PB_GetState (Button_TypeDef Button)
 Returns the selected Button state.
uint8_t BSP_JOY_Init (void)
 Configures joystick available on adafruit 1.8" TFT shield managed through ADC to detect motion.
void BSP_JOY_DeInit (void)
 DeInit joystick GPIOs.
JOYState_TypeDef BSP_JOY_GetState (void)
 Returns the Joystick key pressed.

Variables

GPIO_TypeDef * GPIO_PORT [LEDn] = {LED2_GPIO_PORT}
const uint16_t GPIO_PIN [LEDn] = {LED2_PIN}
GPIO_TypeDef * BUTTON_PORT [BUTTONn] = {KEY_BUTTON_GPIO_PORT}
const uint16_t BUTTON_PIN [BUTTONn] = {KEY_BUTTON_PIN}
const uint8_t BUTTON_IRQn [BUTTONn] = {KEY_BUTTON_EXTI_IRQn}
uint32_t SpixTimeout = NUCLEO_SPIx_TIMEOUT_MAX
 BUS variables.
static SPI_HandleTypeDef hnucleo_Spi
static ADC_HandleTypeDef hnucleo_Adc
static ADC_ChannelConfTypeDef sConfig

Detailed Description

This file provides set of firmware functions to manage:

Author:
MCD Application Team
Version:
V1.2.6
Date:
31-January-2017
  • LEDs and push-button available on STM32F4XX-Nucleo Kit from STMicroelectronics
  • LCD, joystick and microSD available on Adafruit 1.8" TFT LCD shield (reference ID 802)
Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f4xx_nucleo.c.

Generated on Fri Jan 20 2017 15:36:09 for STM32F4xx-Nucleo BSP User Manual by   doxygen 1.7.6.1