STM32F469I-Discovery BSP User Manual: STM32469I Discovery AUDIO OUT Private Functions

STM32F469I-Discovery BSP Drivers

STM32F469I-Discovery BSP User Manual
STM32469I Discovery AUDIO OUT Private Functions

Functions

uint8_t BSP_AUDIO_OUT_Init (uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
 Configures the audio peripherals.
uint8_t BSP_AUDIO_OUT_Play (uint16_t *pBuffer, uint32_t Size)
 Starts playing audio stream from a data buffer for a determined size.
void BSP_AUDIO_OUT_ChangeBuffer (uint16_t *pData, uint16_t Size)
 Sends n-Bytes on the SAI interface.
uint8_t BSP_AUDIO_OUT_Pause (void)
 This function Pauses the audio file stream.
uint8_t BSP_AUDIO_OUT_Resume (void)
 This function Resumes the audio file stream.
uint8_t BSP_AUDIO_OUT_Stop (uint32_t Option)
 Stops audio playing and Power down the Audio Codec.
uint8_t BSP_AUDIO_OUT_SetVolume (uint8_t Volume)
 Controls the current audio volume level.
uint8_t BSP_AUDIO_OUT_SetMute (uint32_t Cmd)
 Enables or disables the MUTE mode by software.
uint8_t BSP_AUDIO_OUT_SetOutputMode (uint8_t Output)
 Switch dynamically (while audio file is being played) the output target (speaker or headphone).
void BSP_AUDIO_OUT_SetFrequency (uint32_t AudioFreq)
 Updates the audio frequency.
void BSP_AUDIO_OUT_SetAudioFrameSlot (uint32_t AudioFrameSlot)
 Updates the Audio frame slot configuration.
void BSP_AUDIO_OUT_DeInit (void)
 Deinit the audio peripherals.
void HAL_SAI_TxCpltCallback (SAI_HandleTypeDef *hsai)
 Tx Transfer completed callbacks.
void HAL_SAI_TxHalfCpltCallback (SAI_HandleTypeDef *hsai)
 Tx Half Transfer completed callbacks.
void HAL_SAI_ErrorCallback (SAI_HandleTypeDef *hsai)
 SAI error callbacks.
__weak void BSP_AUDIO_OUT_TransferComplete_CallBack (void)
 Manages the DMA full Transfer complete event.
__weak void BSP_AUDIO_OUT_HalfTransfer_CallBack (void)
 Manages the DMA Half Transfer complete event.
__weak void BSP_AUDIO_OUT_Error_CallBack (void)
 Manages the DMA FIFO error event.
__weak void BSP_AUDIO_OUT_MspInit (SAI_HandleTypeDef *hsai, void *Params)
 Initializes BSP_AUDIO_OUT MSP.
__weak void BSP_AUDIO_OUT_MspDeInit (SAI_HandleTypeDef *hsai, void *Params)
 Deinitializes BSP_AUDIO_OUT MSP.
__weak void BSP_AUDIO_OUT_ClockConfig (SAI_HandleTypeDef *hsai, uint32_t AudioFreq, void *Params)
 Clock Config.
void BSP_AUDIO_OUT_ChangeAudioConfig (uint32_t AudioOutOption)
 Changes the Audio Out Configuration.
static uint8_t SAIx_Init (uint32_t AudioFreq)
 Initializes the Audio Codec audio interface (SAI).
static void AUDIO_CODEC_Reset (void)
 Resets the audio codec.

Function Documentation

static void AUDIO_CODEC_Reset ( void  ) [static]

Resets the audio codec.

It restores the default configuration of the codec (this function shall be called before initializing the codec).

Definition at line 915 of file stm32469i_discovery_audio.c.

References AUDIO_RESET_GPIO_PORT, AUDIO_RESET_PIN, and CODEC_RESET_DELAY.

Referenced by BSP_AUDIO_OUT_Init().

void BSP_AUDIO_OUT_ChangeAudioConfig ( uint32_t  AudioOutOption)

Changes the Audio Out Configuration.

Parameters:
AudioOutOption,:specifies the audio out new configuration This parameter can be any value of BSP AUDIO OUT Option
Note:
This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio out configuration.

Definition at line 517 of file stm32469i_discovery_audio.c.

References BSP_AUDIO_OUT_CIRCULARMODE, BSP_AUDIO_OUT_STEREOMODE, and haudio_out_sai.

void BSP_AUDIO_OUT_ChangeBuffer ( uint16_t *  pData,
uint16_t  Size 
)

Sends n-Bytes on the SAI interface.

Parameters:
pData,:pointer on PCM samples buffer
Size,:number of data to be written

Definition at line 323 of file stm32469i_discovery_audio.c.

References haudio_out_sai.

__weak void BSP_AUDIO_OUT_ClockConfig ( SAI_HandleTypeDef *  hsai,
uint32_t  AudioFreq,
void *  Params 
)

Clock Config.

Parameters:
hsai,:might be required to set audio peripheral predivider if any.
AudioFreq,:Audio frequency used to play the audio stream.
Note:
This API is called by BSP_AUDIO_OUT_Init() and BSP_AUDIO_OUT_SetFrequency() Being __weak it can be overwritten by the application
Parameters:
Params: pointer on additional configuration parameters, can be NULL.

Definition at line 784 of file stm32469i_discovery_audio.c.

Referenced by BSP_AUDIO_OUT_Init(), and BSP_AUDIO_OUT_SetFrequency().

void BSP_AUDIO_OUT_DeInit ( void  )

Deinit the audio peripherals.

Definition at line 593 of file stm32469i_discovery_audio.c.

References audio_drv, BSP_AUDIO_OUT_MspDeInit(), haudio_out_sai, and SAIx_DeInit().

__weak void BSP_AUDIO_OUT_Error_CallBack ( void  )

Manages the DMA FIFO error event.

Definition at line 651 of file stm32469i_discovery_audio.c.

Referenced by HAL_SAI_ErrorCallback().

__weak void BSP_AUDIO_OUT_HalfTransfer_CallBack ( void  )

Manages the DMA Half Transfer complete event.

Definition at line 644 of file stm32469i_discovery_audio.c.

Referenced by HAL_SAI_TxHalfCpltCallback().

uint8_t BSP_AUDIO_OUT_Init ( uint16_t  OutputDevice,
uint8_t  Volume,
uint32_t  AudioFreq 
)

Configures the audio peripherals.

Parameters:
OutputDevice,:OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, or OUTPUT_DEVICE_BOTH.
Volume,:Initial volume level (from 0 (Mute) to 100 (Max))
AudioFreq,:Audio frequency used to play the audio stream.
Note:
The SAI PLL input clock must be done in the user application.
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 233 of file stm32469i_discovery_audio.c.

References AUDIO_CODEC_Reset(), audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, AUDIO_SAIx, BSP_AUDIO_OUT_ClockConfig(), BSP_AUDIO_OUT_MspInit(), haudio_out_sai, SAIx_DeInit(), and SAIx_Init().

__weak void BSP_AUDIO_OUT_MspDeInit ( SAI_HandleTypeDef *  hsai,
void *  Params 
)

Deinitializes BSP_AUDIO_OUT MSP.

Parameters:
hsai,:SAI handle
Params: pointer on additional configuration parameters, can be NULL.

Definition at line 738 of file stm32469i_discovery_audio.c.

References AUDIO_RESET_GPIO_PORT, AUDIO_RESET_PIN, AUDIO_SAIx, AUDIO_SAIx_CLK_DISABLE, AUDIO_SAIx_DMAx_IRQ, AUDIO_SAIx_FS_PIN, AUDIO_SAIx_MCK_PIN, AUDIO_SAIx_MCLK_GPIO_PORT, AUDIO_SAIx_SCK_PIN, AUDIO_SAIx_SCK_SD_FS_GPIO_PORT, and AUDIO_SAIx_SD_PIN.

Referenced by BSP_AUDIO_OUT_DeInit().

uint8_t BSP_AUDIO_OUT_Pause ( void  )

This function Pauses the audio file stream.

In case of using DMA, the DMA Pause feature is used.

Warning:
When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 336 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_Play ( uint16_t *  pBuffer,
uint32_t  Size 
)

Starts playing audio stream from a data buffer for a determined size.

Parameters:
pBuffer,:Pointer to the buffer
Size,:Number of audio data BYTES.
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 296 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, AUDIODATA_SIZE, DMA_MAX, and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_Resume ( void  )

This function Resumes the audio file stream.

WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 367 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

void BSP_AUDIO_OUT_SetAudioFrameSlot ( uint32_t  AudioFrameSlot)

Updates the Audio frame slot configuration.

Parameters:
AudioFrameSlot,:specifies the audio Frame slot This parameter can be any value of STM32469I Discovery Audio Slot TDM mode
Note:
This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frame slot.

Definition at line 577 of file stm32469i_discovery_audio.c.

References haudio_out_sai.

void BSP_AUDIO_OUT_SetFrequency ( uint32_t  AudioFreq)

Updates the audio frequency.

Parameters:
AudioFreq,:Audio frequency used to play the audio stream.
Note:
This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frequency.

Definition at line 494 of file stm32469i_discovery_audio.c.

References BSP_AUDIO_OUT_ClockConfig(), and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_SetMute ( uint32_t  Cmd)

Enables or disables the MUTE mode by software.

Parameters:
Cmd,:Could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to unmute the codec and restore previous volume level.
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 453 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_SetOutputMode ( uint8_t  Output)

Switch dynamically (while audio file is being played) the output target (speaker or headphone).

Parameters:
Output,:The audio output target: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 474 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_SetVolume ( uint8_t  Volume)

Controls the current audio volume level.

Parameters:
Volume,:Volume level to be set in percentage from 0% to 100% (0 for Mute and 100 for Max volume level).
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 433 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_Stop ( uint32_t  Option)

Stops audio playing and Power down the Audio Codec.

Parameters:
Option,:could be one of the following parameters
  • CODEC_PDWN_SW: for software power off (by writing registers). Then no need to reconfigure the Codec after power on.
  • CODEC_PDWN_HW: completely shut down the codec (physically). Then need to reconfigure the Codec after power on.
Return values:
AUDIO_OKif correct communication, else wrong communication

Definition at line 399 of file stm32469i_discovery_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

Manages the DMA full Transfer complete event.

Definition at line 637 of file stm32469i_discovery_audio.c.

Referenced by HAL_SAI_TxCpltCallback().

void HAL_SAI_ErrorCallback ( SAI_HandleTypeDef *  hsai)

SAI error callbacks.

Parameters:
hsai,:SAI handle

Definition at line 629 of file stm32469i_discovery_audio.c.

References BSP_AUDIO_OUT_Error_CallBack().

void HAL_SAI_TxCpltCallback ( SAI_HandleTypeDef *  hsai)

Tx Transfer completed callbacks.

Parameters:
hsai,:SAI handle

Definition at line 607 of file stm32469i_discovery_audio.c.

References BSP_AUDIO_OUT_TransferComplete_CallBack().

void HAL_SAI_TxHalfCpltCallback ( SAI_HandleTypeDef *  hsai)

Tx Half Transfer completed callbacks.

Parameters:
hsai,:SAI handle

Definition at line 618 of file stm32469i_discovery_audio.c.

References BSP_AUDIO_OUT_HalfTransfer_CallBack().

static uint8_t SAIx_Init ( uint32_t  AudioFreq) [static]

Initializes the Audio Codec audio interface (SAI).

Parameters:
AudioFreq,:Audio frequency to be configured for the SAI peripheral.
Note:
The default SlotActive configuration is set to CODEC_AUDIOFRAME_SLOT_0123 and user can update this configuration using

Definition at line 829 of file stm32469i_discovery_audio.c.

References AUDIO_ERROR, AUDIO_OK, AUDIO_SAIx, CODEC_AUDIOFRAME_SLOT_0123, and haudio_out_sai.

Referenced by BSP_AUDIO_OUT_Init().

Generated on Wed Jan 13 2016 10:58:46 for STM32F469I-Discovery BSP User Manual by   doxygen 1.7.6.1