stm32f413h_discovery.h File Reference

This file contains definitions for STM32F413H_DISCOVERY's LEDs, push-buttons and COM ports hardware resources. More...

#include "stm32f4xx_hal.h"

Go to the source code of this file.

Defines
#define	LEDn   ((uint8_t)2)
#define	LED4_GPIO_PORT   GPIOE
#define	LED4_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
#define	LED4_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
#define	LED3_GPIO_PORT   GPIOC
#define	LED3_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED3_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LED4_PIN   GPIO_PIN_3
#define	LED3_PIN   GPIO_PIN_5
#define	LEDx_GPIO_CLK_ENABLE(__INDEX__)
#define	LEDx_GPIO_CLK_DISABLE(__INDEX__)
#define	BUTTONn   ((uint8_t)1)
#define	WAKEUP_BUTTON_PIN   GPIO_PIN_0
	Wakeup push-button.
#define	WAKEUP_BUTTON_GPIO_PORT   GPIOA
#define	WAKEUP_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	WAKEUP_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	WAKEUP_BUTTON_EXTI_IRQn   EXTI0_IRQn
#define	SD_DETECT_PIN   GPIO_PIN_11
	SD-detect signal.
#define	SD_DETECT_GPIO_PORT   GPIOF
#define	SD_DETECT_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOF_CLK_ENABLE()
#define	SD_DETECT_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOF_CLK_DISABLE()
#define	SD_DETECT_EXTI_IRQn   EXTI15_10_IRQn
#define	TS_INT_PIN   GPIO_PIN_1
	TS INT pin.
#define	TS_INT_GPIO_PORT   GPIOC
#define	TS_INT_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	TS_INT_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	TS_INT_EXTI_IRQn   EXTI1_IRQn
#define	TS_RESET_PIN   GPIO_PIN_13
	TS RST pin.
#define	TS_RESET_GPIO_PORT   GPIOB
#define	TS_RESET_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
#define	TS_RESET_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOB_CLK_DISABLE()
#define	TS_RESET_EXTI_IRQn   EXTI15_10_IRQn
#define	COMn   ((uint8_t)1)
#define	DISCOVERY_COM1   USART6
	Definition for COM port1, connected to USART6.
#define	DISCOVERY_COM1_CLK_ENABLE()   __HAL_RCC_USART6_CLK_ENABLE()
#define	DISCOVERY_COM1_CLK_DISABLE()   __HAL_RCC_USART6_CLK_DISABLE()
#define	DISCOVERY_COM1_TX_PIN   GPIO_PIN_14
#define	DISCOVERY_COM1_TX_GPIO_PORT   GPIOG
#define	DISCOVERY_COM1_TX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOG_CLK_ENABLE()
#define	DISCOVERY_COM1_TX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOG_CLK_DISABLE()
#define	DISCOVERY_COM1_TX_AF   GPIO_AF8_USART6
#define	DISCOVERY_COM1_RX_PIN   GPIO_PIN_9
#define	DISCOVERY_COM1_RX_GPIO_PORT   GPIOG
#define	DISCOVERY_COM1_RX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOG_CLK_ENABLE()
#define	DISCOVERY_COM1_RX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOG_CLK_DISABLE()
#define	DISCOVERY_COM1_RX_AF   GPIO_AF8_USART6
#define	DISCOVERY_COM1_IRQn   USART6_IRQn
#define	DISCOVERY_COMx_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();} } while(0)
#define	DISCOVERY_COMx_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0)
#define	DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();} } while(0)
#define	DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define	DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();} } while(0)
#define	DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0)
#define	AUDIO_I2C_ADDRESS   ((uint16_t)0x34)
#define	EEPROM_I2C_ADDRESS_A01   ((uint16_t)0xA0)
#define	EEPROM_I2C_ADDRESS_A02   ((uint16_t)0xA6)
#define	TS_I2C_ADDRESS   ((uint16_t)0x70)
#define	DISCOVERY_AUDIO_I2Cx   FMPI2C1
#define	DISCOVERY_AUDIO_I2Cx_CLK_ENABLE()   __HAL_RCC_FMPI2C1_CLK_ENABLE()
#define	DISCOVERY_AUDIO_DMAx_CLK_ENABLE()   __HAL_RCC_DMA1_CLK_ENABLE()
#define	DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	DISCOVERY_AUDIO_I2Cx_FORCE_RESET()   __HAL_RCC_FMPI2C1_FORCE_RESET()
#define	DISCOVERY_AUDIO_I2Cx_RELEASE_RESET()   __HAL_RCC_FMPI2C1_RELEASE_RESET()
#define	DISCOVERY_AUDIO_I2Cx_SCL_PIN   GPIO_PIN_6
#define	DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT   GPIOC
#define	DISCOVERY_AUDIO_I2Cx_SCL_SDA_AF   GPIO_AF4_FMPI2C1
#define	DISCOVERY_AUDIO_I2Cx_SDA_PIN   GPIO_PIN_7
#define	DISCOVERY_AUDIO_I2Cx_EV_IRQn   FMPI2C1_EV_IRQn
#define	DISCOVERY_AUDIO_I2Cx_ER_IRQn   FMPI2C1_ER_IRQn
Enumerations
enum	Led_TypeDef { LED3 = 0, LED_GREEN = LED3, LED4 = 1, LED_RED = LED4 }
enum	Button_TypeDef { BUTTON_WAKEUP = 0 }
enum	ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }
enum	COM_TypeDef { COM1 = 0 }
Functions
uint32_t	BSP_GetVersion (void)
	This method returns the STM32F413H DISCOVERY BSP Driver revision.
void	BSP_LED_Init (Led_TypeDef Led)
	Configures LEDs.
void	BSP_LED_DeInit (Led_TypeDef Led)
	DeInit LEDs.
void	BSP_LED_On (Led_TypeDef Led)
	Turns selected LED On.
void	BSP_LED_Off (Led_TypeDef Led)
	Turns selected LED Off.
void	BSP_LED_Toggle (Led_TypeDef Led)
	Toggles the selected LED.
void	BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
	Configures button GPIO and EXTI Line.
void	BSP_PB_DeInit (Button_TypeDef Button)
	Push Button DeInit.
uint32_t	BSP_PB_GetState (Button_TypeDef Button)
	Returns the selected button state.
void	BSP_COM_Init (COM_TypeDef COM, UART_HandleTypeDef *husart)
	Configures COM port.
void	BSP_COM_DeInit (COM_TypeDef COM, UART_HandleTypeDef *huart)
	DeInit COM port.

---

Detailed Description

This file contains definitions for STM32F413H_DISCOVERY's LEDs, push-buttons and COM ports hardware resources.

Author:

MCD Application Team

Version:

V1.0.0

Date:

27-January-2017

Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f413h_discovery.h.