STM32F072B-Discovery BSP User Manual
|
This file contains definitions for STM32F072B-Discovery's Leds, push- buttons hardware resources. More...
#include "stm32f0xx_hal.h"
Go to the source code of this file.
Defines | |
#define | LEDn 4 |
#define | LED3_PIN GPIO_PIN_6 |
#define | LED3_GPIO_PORT GPIOC |
#define | LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
#define | LED4_PIN GPIO_PIN_8 |
#define | LED4_GPIO_PORT GPIOC |
#define | LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
#define | LED5_PIN GPIO_PIN_9 |
#define | LED5_GPIO_PORT GPIOC |
#define | LED5_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | LED5_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
#define | LED6_PIN GPIO_PIN_7 |
#define | LED6_GPIO_PORT GPIOC |
#define | LED6_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | LED6_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
#define | LEDx_GPIO_CLK_ENABLE(__LED__) |
#define | LEDx_GPIO_CLK_DISABLE(__LED__) |
#define | BUTTONn 1 |
#define | USER_BUTTON_PIN GPIO_PIN_0 /* PA0 */ |
USER push-button. | |
#define | USER_BUTTON_GPIO_PORT GPIOA |
#define | USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | USER_BUTTON_EXTI_IRQn EXTI0_1_IRQn |
#define | BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) USER_BUTTON_GPIO_CLK_ENABLE();} while(0) |
#define | BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) (((__BUTTON__) == BUTTON_USER) ? USER_BUTTON_GPIO_CLK_DISABLE() : 0 ) |
#define | DISCOVERY_SPIx SPI2 |
#define | DISCOVERY_SPIx_CLOCK_ENABLE() __HAL_RCC_SPI2_CLK_ENABLE() |
#define | DISCOVERY_SPIx_GPIO_PORT GPIOB /* GPIOB */ |
#define | DISCOVERY_SPIx_AF GPIO_AF0_SPI2 |
#define | DISCOVERY_SPIx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | DISCOVERY_SPIx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
#define | DISCOVERY_SPIx_SCK_PIN GPIO_PIN_13 /* PB.13 */ |
#define | DISCOVERY_SPIx_MISO_PIN GPIO_PIN_14 /* PB.14 */ |
#define | DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_15 /* PB.15 */ |
#define | SPIx_TIMEOUT_MAX ((uint32_t)0x1000) |
#define | DISCOVERY_I2Cx I2C2 |
Definition for I2C Interface pins (I2C2 used) | |
#define | DISCOVERY_I2Cx_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE() |
#define | DISCOVERY_I2Cx_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE() |
#define | DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET() |
#define | DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET() |
#define | DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_10 /* PB.10 */ |
#define | DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_11 /* PB.11 */ |
#define | DISCOVERY_I2Cx_GPIO_PORT GPIOB /* GPIOB */ |
#define | DISCOVERY_I2Cx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | DISCOVERY_I2Cx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
#define | DISCOVERY_I2Cx_AF GPIO_AF1_I2C2 |
#define | I2Cx_TIMEOUT_MAX ((uint32_t)0x10000) |
#define | DISCOVERY_I2Cx_TIMING 0x40B32537 |
#define | DISCOVERY_EEPROM_I2C_ADDRESS_A01 0xA0 |
#define | READWRITE_CMD ((uint8_t)0x80) |
#define | MULTIPLEBYTE_CMD ((uint8_t)0x40) |
#define | DUMMY_BYTE ((uint8_t)0x00) |
#define | GYRO_CS_LOW() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_RESET) |
#define | GYRO_CS_HIGH() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_SET) |
#define | GYRO_CS_GPIO_PORT GPIOC /* GPIOC */ |
GYRO SPI Interface pins. | |
#define | GYRO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | GYRO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
#define | GYRO_CS_PIN GPIO_PIN_0 /* PC.00 */ |
#define | GYRO_INT_GPIO_PORT GPIOC /* GPIOC */ |
#define | GYRO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
#define | GYRO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
#define | GYRO_INT1_PIN GPIO_PIN_1 /* PC.01 */ |
#define | GYRO_INT1_EXTI_IRQn EXTI0_1_IRQn |
#define | GYRO_INT2_PIN GPIO_PIN_2 /* PC.02 */ |
#define | GYRO_INT2_EXTI_IRQn EXTI2_3_IRQn |
#define | DISCOVERY_EEPROM_DMA DMA1 |
I2C EEPROM Interface pins. | |
#define | DISCOVERY_EEPROM_DMA_CHANNEL_TX DMA1_Channel4 |
#define | DISCOVERY_EEPROM_DMA_CHANNEL_RX DMA1_Channel5 |
#define | DISCOVERY_EEPROM_DMA_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
#define | DISCOVERY_EEPROM_DMA_CLK_DISABLE() __HAL_RCC_DMA1_CLK_DISABLE() |
#define | DISCOVERY_EEPROM_DMA_TX_IRQn DMA1_Channel4_5_6_7_IRQn |
#define | DISCOVERY_EEPROM_DMA_RX_IRQn DMA1_Channel4_5_6_7_IRQn |
#define | DISCOVERY_EEPROM_DMA_PREPRIO 0 |
#define | DISCOVERY_EEPROM_DMA_SUBPRIO 0 |
Enumerations | |
enum | Led_TypeDef { LED3 = 0, LED4 = 1, LED5 = 2, LED6 = 3, LED_RED = LED3, LED_ORANGE = LED4, LED_GREEN = LED5, LED_BLUE = LED6 } |
LED Types Definition. More... | |
enum | Button_TypeDef { BUTTON_USER = 0 } |
BUTTON Types Definition. More... | |
enum | ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } |
Functions | |
uint32_t | BSP_GetVersion (void) |
This method returns the STM32F072B DISCO BSP Driver revision. | |
void | BSP_LED_Init (Led_TypeDef Led) |
Configures LED GPIO. | |
void | BSP_LED_On (Led_TypeDef Led) |
Turns selected LED On. | |
void | BSP_LED_Off (Led_TypeDef Led) |
Turns selected LED Off. | |
void | BSP_LED_Toggle (Led_TypeDef Led) |
Toggles the selected LED. | |
void | BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Mode) |
Configures Button GPIO and EXTI Line. | |
uint32_t | BSP_PB_GetState (Button_TypeDef Button) |
Returns the selected Push Button state. |
Detailed Description
This file contains definitions for STM32F072B-Discovery's Leds, push- buttons hardware resources.
- Attention:
© COPYRIGHT(c) 2016 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f072b_discovery.h.
Generated on Wed Jul 5 2017 09:43:19 for STM32F072B-Discovery BSP User Manual by
![doxygen](doxygen.png)