stm32f769i_eval_sd.h File Reference

This file contains the common defines and functions prototypes for the stm32f769i_eval_sd.c driver. More...

#include "stm32f7xx_hal.h" #include "stm32f769i_eval_io.h"

Go to the source code of this file.

Defines
#define	BSP_SD_CardInfo   HAL_SD_CardInfoTypeDef
	SD Card information structure.
#define	MSD_OK   ((uint8_t)0x00)
	SD status structure definition.
#define	MSD_ERROR   ((uint8_t)0x01)
#define	MSD_ERROR_SD_NOT_PRESENT   ((uint8_t)0x02)
#define	SD_TRANSFER_OK   ((uint8_t)0x00)
	SD transfer state definition.
#define	SD_TRANSFER_BUSY   ((uint8_t)0x01)
#define	SD_PRESENT   ((uint8_t)0x01)
#define	SD_NOT_PRESENT   ((uint8_t)0x00)
#define	SD_CARD1   ((uint32_t)0x00)
#define	SD_CARD2   ((uint32_t)0x01)
#define	SD_DATATIMEOUT   ((uint32_t)100000000)
#define	__DMAx_TxRx_CLK_ENABLE   __HAL_RCC_DMA2_CLK_ENABLE
#define	SD1_DMAx_Tx_CHANNEL   DMA_CHANNEL_4
#define	SD1_DMAx_Rx_CHANNEL   DMA_CHANNEL_4
#define	SD1_DMAx_Tx_STREAM   DMA2_Stream6
#define	SD1_DMAx_Rx_STREAM   DMA2_Stream3
#define	SD1_DMAx_Tx_IRQn   DMA2_Stream6_IRQn
#define	SD1_DMAx_Rx_IRQn   DMA2_Stream3_IRQn
#define	BSP_SDMMC1_DMA_Tx_IRQHandler   DMA2_Stream6_IRQHandler
#define	BSP_SDMMC1_DMA_Rx_IRQHandler   DMA2_Stream3_IRQHandler
#define	BSP_SDMMC1_IRQHandler   SDMMC1_IRQHandler
#define	SD2_DMAx_Tx_CHANNEL   DMA_CHANNEL_11
#define	SD2_DMAx_Rx_CHANNEL   DMA_CHANNEL_11
#define	SD2_DMAx_Tx_STREAM   DMA2_Stream5
#define	SD2_DMAx_Rx_STREAM   DMA2_Stream0
#define	SD2_DMAx_Tx_IRQn   DMA2_Stream5_IRQn
#define	SD2_DMAx_Rx_IRQn   DMA2_Stream0_IRQn
#define	BSP_SDMMC2_DMA_Tx_IRQHandler   DMA2_Stream5_IRQHandler
#define	BSP_SDMMC2_DMA_Rx_IRQHandler   DMA2_Stream0_IRQHandler
#define	BSP_SDMMC2_IRQHandler   SDMMC2_IRQHandler
#define	SD_DetectIRQHandler()   HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8)
Functions
uint8_t	BSP_SD_Init (void)
	Initializes the SD card device.
uint8_t	BSP_SD_InitEx (uint32_t SdCard)
	Initializes the SD card device.
uint8_t	BSP_SD_DeInit (void)
	DeInitializes the SD card device.
uint8_t	BSP_SD_DeInitEx (uint32_t SdCard)
	DeInitializes the SD card device.
uint8_t	BSP_SD_ITConfig (void)
	Configures Interrupt mode for SD1 detection pin.
uint8_t	BSP_SD_ITConfigEx (uint32_t SdCard)
	Configures Interrupt mode for SD detection pin.
uint8_t	BSP_SD_ReadBlocks (uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout)
	Reads block(s) from a specified address in an SD card, in polling mode.
uint8_t	BSP_SD_ReadBlocksEx (uint32_t SdCard, uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout)
	Reads block(s) from a specified address in an SD card, in polling mode.
uint8_t	BSP_SD_WriteBlocks (uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout)
	Writes block(s) to a specified address in an SD card, in polling mode.
uint8_t	BSP_SD_WriteBlocksEx (uint32_t SdCard, uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout)
	Writes block(s) to a specified address in an SD card, in polling mode.
uint8_t	BSP_SD_ReadBlocks_DMA (uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks)
	Reads block(s) from a specified address in an SD card, in DMA mode.
uint8_t	BSP_SD_ReadBlocks_DMAEx (uint32_t SdCard, uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks)
	Reads block(s) from a specified address in an SD card, in DMA mode.
uint8_t	BSP_SD_WriteBlocks_DMA (uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks)
	Writes block(s) to a specified address in an SD card, in DMA mode.
uint8_t	BSP_SD_WriteBlocks_DMAEx (uint32_t SdCard, uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks)
	Writes block(s) to a specified address in an SD card, in DMA mode.
uint8_t	BSP_SD_Erase (uint32_t StartAddr, uint32_t EndAddr)
	Erases the specified memory area of the given SD card.
uint8_t	BSP_SD_EraseEx (uint32_t SdCard, uint32_t StartAddr, uint32_t EndAddr)
	Erases the specified memory area of the given SD card.
uint8_t	BSP_SD_GetCardState (void)
	Gets the current SD card data status.
uint8_t	BSP_SD_GetCardStateEx (uint32_t SdCard)
	Gets the current SD card data status.
void	BSP_SD_GetCardInfo (BSP_SD_CardInfo *CardInfo)
	Get SD information about specific SD card.
void	BSP_SD_GetCardInfoEx (uint32_t SdCard, BSP_SD_CardInfo *CardInfo)
	Get SD information about specific SD card.
uint8_t	BSP_SD_IsDetected (void)
	Detects if SD card is correctly plugged in the memory slot or not.
uint8_t	BSP_SD_IsDetectedEx (uint32_t SdCard)
	Detects if SD card is correctly plugged in the memory slot or not.
void	BSP_SD_MspInit (SD_HandleTypeDef *hsd, void *Params)
	Initializes the SD MSP.
void	BSP_SD_MspDeInit (SD_HandleTypeDef *hsd, void *Params)
	DeInitializes the SD MSP.
void	BSP_SD_AbortCallback (uint32_t SdCard)
	BSP SD Abort callbacks.
void	BSP_SD_WriteCpltCallback (uint32_t SdCard)
	BSP Tx Transfer completed callbacks.
void	BSP_SD_ReadCpltCallback (uint32_t SdCard)
	BSP Rx Transfer completed callbacks.

---

Detailed Description

This file contains the common defines and functions prototypes for the stm32f769i_eval_sd.c driver.

Author:

MCD Application Team

Version:

V2.0.0

Date:

30-December-2016

Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f769i_eval_sd.h.