stm32f769i_eval_sd.h

Go to the documentation of this file.

/**
  ******************************************************************************
  * @file    stm32f769i_eval_sd.h
  * @author  MCD Application Team
  * @version V2.0.0
  * @date    30-December-2016
  * @brief   This file contains the common defines and functions prototypes for
  *          the stm32f769i_eval_sd.c driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F769I_EVAL_SD_H
#define __STM32F769I_EVAL_SD_H

#ifdef __cplusplus
 extern "C" {
#endif 

/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
#include "stm32f769i_eval_io.h"

/** @addtogroup BSP
  * @{
  */ 

/** @addtogroup STM32F769I_EVAL
  * @{
  */
    
/** @addtogroup STM32F769I_EVAL_SD
  * @{
  */    

/** @defgroup STM32F769I_EVAL_SD_Exported_Types SD Exported Types
  * @{
  */

/** 
  * @brief SD Card information structure 
  */
#define BSP_SD_CardInfo HAL_SD_CardInfoTypeDef
/**
  * @}
  */
   
/** 
  * @brief  SD status structure definition  
  */     
#define   MSD_OK                        ((uint8_t)0x00)
#define   MSD_ERROR                     ((uint8_t)0x01)
#define   MSD_ERROR_SD_NOT_PRESENT      ((uint8_t)0x02)

/** 
  * @brief  SD transfer state definition  
  */     
#define   SD_TRANSFER_OK                ((uint8_t)0x00)
#define   SD_TRANSFER_BUSY              ((uint8_t)0x01)

/** @defgroup STM32F769I_EVAL_SD_Exported_Constants SD Exported Constants
  * @{
  */ 
#define SD_PRESENT               ((uint8_t)0x01)
#define SD_NOT_PRESENT           ((uint8_t)0x00)

#define SD_CARD1                 ((uint32_t)0x00)
#define SD_CARD2                 ((uint32_t)0x01)
    
#define SD_DATATIMEOUT           ((uint32_t)100000000)
    
/* DMA definitions for SD DMA transfer */
#define __DMAx_TxRx_CLK_ENABLE            __HAL_RCC_DMA2_CLK_ENABLE
#define SD1_DMAx_Tx_CHANNEL                DMA_CHANNEL_4
#define SD1_DMAx_Rx_CHANNEL                DMA_CHANNEL_4
#define SD1_DMAx_Tx_STREAM                 DMA2_Stream6  
#define SD1_DMAx_Rx_STREAM                 DMA2_Stream3  
#define SD1_DMAx_Tx_IRQn                   DMA2_Stream6_IRQn
#define SD1_DMAx_Rx_IRQn                   DMA2_Stream3_IRQn
#define BSP_SDMMC1_DMA_Tx_IRQHandler       DMA2_Stream6_IRQHandler   
#define BSP_SDMMC1_DMA_Rx_IRQHandler       DMA2_Stream3_IRQHandler 
#define BSP_SDMMC1_IRQHandler              SDMMC1_IRQHandler
    
#define SD2_DMAx_Tx_CHANNEL                DMA_CHANNEL_11
#define SD2_DMAx_Rx_CHANNEL                DMA_CHANNEL_11
#define SD2_DMAx_Tx_STREAM                 DMA2_Stream5  
#define SD2_DMAx_Rx_STREAM                 DMA2_Stream0  
#define SD2_DMAx_Tx_IRQn                   DMA2_Stream5_IRQn
#define SD2_DMAx_Rx_IRQn                   DMA2_Stream0_IRQn
#define BSP_SDMMC2_DMA_Tx_IRQHandler       DMA2_Stream5_IRQHandler   
#define BSP_SDMMC2_DMA_Rx_IRQHandler       DMA2_Stream0_IRQHandler 
#define BSP_SDMMC2_IRQHandler              SDMMC2_IRQHandler
    
#define SD_DetectIRQHandler()             HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8)
/**
  * @}
  */
  
/** @defgroup STM32F769I_EVAL_SD_Exported_Macro SD Exported Macro
  * @{
  */ 
/**
  * @}
  */
   
/** @defgroup STM32F769I_EVAL_SD_Exported_Functions SD Exported Functions
  * @{
  */   
uint8_t BSP_SD_Init(void);
uint8_t BSP_SD_InitEx(uint32_t SdCard);
uint8_t BSP_SD_DeInit(void);
uint8_t BSP_SD_DeInitEx(uint32_t SdCard);
uint8_t BSP_SD_ITConfig(void);
uint8_t BSP_SD_ITConfigEx(uint32_t SdCard);
uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
uint8_t BSP_SD_ReadBlocksEx(uint32_t SdCard, uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks,  uint32_t Timeout);
uint8_t BSP_SD_WriteBlocksEx(uint32_t SdCard, uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks,  uint32_t Timeout);
uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks);
uint8_t BSP_SD_ReadBlocks_DMAEx(uint32_t SdCard, uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks);
uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks);
uint8_t BSP_SD_WriteBlocks_DMAEx(uint32_t SdCard, uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks);
uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr);
uint8_t BSP_SD_EraseEx(uint32_t SdCard, uint32_t StartAddr, uint32_t EndAddr);
uint8_t BSP_SD_GetCardState(void);
uint8_t BSP_SD_GetCardStateEx(uint32_t SdCard);
void    BSP_SD_GetCardInfo(BSP_SD_CardInfo *CardInfo);
void    BSP_SD_GetCardInfoEx(uint32_t SdCard, BSP_SD_CardInfo *CardInfo);
uint8_t BSP_SD_IsDetected(void);
uint8_t BSP_SD_IsDetectedEx(uint32_t SdCard);

/* These functions can be modified in case the current settings (e.g. DMA stream)
   need to be changed for specific application needs */
void    BSP_SD_MspInit(SD_HandleTypeDef *hsd, void *Params);
void    BSP_SD_MspDeInit(SD_HandleTypeDef *hsd, void *Params);
void    BSP_SD_AbortCallback(uint32_t SdCard);
void    BSP_SD_WriteCpltCallback(uint32_t SdCard);
void    BSP_SD_ReadCpltCallback(uint32_t SdCard);

/**
  * @}
  */ 

/**
  * @}
  */ 

/**
  * @}
  */ 

/**
  * @}
  */ 

#ifdef __cplusplus
}
#endif

#endif /* __STM32F769I_EVAL_SD_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/