_BSP_User_Manual: stm3210e_eval_serialflash.c File Reference

STM3210E EVAL BSP Driver

stm3210e_eval_serialflash.c File Reference

This file provides a set of functions needed to manage the SPI M25Pxx FLASH memory mounted on STM3210E_EVAL board. It implements a high level communication layer for read and write from/to this memory. The needed STM32 hardware resources (SPI and GPIO) are defined in stm3210e_eval.h file, and the initialization is performed in FLASH_SPI_IO_Init() function declared in stm3210e_eval.c file. You can easily tailor this driver to any other development board, by just adapting the defines for hardware resources and FLASH_SPI_IO_Init() function. More...

Go to the source code of this file.

Functions

uint8_t BSP_SERIAL_FLASH_Init (void)
 Initializes peripherals used by the Serial FLASH device.
uint8_t BSP_SERIAL_FLASH_EraseSector (uint32_t SectorAddr)
 Erases the specified FLASH sector.
uint8_t BSP_SERIAL_FLASH_EraseBulk (void)
 Erases the entire FLASH.
uint8_t BSP_SERIAL_FLASH_WritePage (uint32_t uwStartAddress, uint8_t *pData, uint32_t uwDataSize)
 Writes more than one byte to the FLASH with a single WRITE cycle (Page WRITE sequence).
uint8_t BSP_SERIAL_FLASH_WriteData (uint32_t uwStartAddress, uint8_t *pData, uint32_t uwDataSize)
 Writes block of data to the FLASH.
uint8_t BSP_SERIAL_FLASH_ReadData (uint32_t uwStartAddress, uint8_t *pData, uint32_t uwDataSize)
 Reads a block of data from the FLASH.
uint32_t BSP_SERIAL_FLASH_ReadID (void)
 Reads FLASH identification.

Detailed Description

This file provides a set of functions needed to manage the SPI M25Pxx FLASH memory mounted on STM3210E_EVAL board. It implements a high level communication layer for read and write from/to this memory. The needed STM32 hardware resources (SPI and GPIO) are defined in stm3210e_eval.h file, and the initialization is performed in FLASH_SPI_IO_Init() function declared in stm3210e_eval.c file. You can easily tailor this driver to any other development board, by just adapting the defines for hardware resources and FLASH_SPI_IO_Init() function.

Author:
MCD Application Team
Version:
$VERSION$
Date:
$DATE$ +---------------------------------------------------------------------+ | Pin assignment | +---------------------------------------+---------------+-------------+ | STM32 SPI Pins | BSP_FLASH | Pin | +---------------------------------------+---------------+-------------+ | BSP_SERIAL_FLASH_CS_PIN | ChipSelect(/S)| 1 | | BSP_SERIAL_FLASH_SPI_MISO_PIN / MISO | DataOut(Q) | 2 | | | VCC | 3 (3.3 V)| | | GND | 4 (0 V) | | BSP_SERIAL_FLASH_SPI_MOSI_PIN / MOSI | DataIn(D) | 5 | | BSP_SERIAL_FLASH_SPI_SCK_PIN / SCLK | Clock(C) | 6 | | | VCC | 7 (3.3 V)| | | VCC | 8 (3.3 V)| +---------------------------------------+---------------+-------------+
Attention:

© COPYRIGHT(c) 2014 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm3210e_eval_serialflash.c.

Generated on Thu Dec 11 2014 16:16:37 for _BSP_User_Manual by   doxygen 1.7.5.1