When you first install the 3D Vision Pro software, the installation provides a set up wizard to help you properly configure your 3D Vision Pro hardware. You can also run the wizard at a later time as described here.
To enable 3D Vision Pro with Quadro GPUs
-
From the NVIDIA Control Panel navigation tree pane, under 3D Settings, select Manage 3D Settings to open the associated page.
-
Click the Global Settings tab.
-
From the Settings box, click Stereo-Display mode and then select the appropriate 3D Vision Pro option, depending on your stereo hardware.
-
Enable stereoscopic 3D according to which applications you plan to view in 3D stereo:
Consumer Stereo: To use the NVIDIA Stereoscopic 3D driver for DirectX games (not supported under Windows XP) -
-
From the Settings box, click Stereo-Enable and then select Off.
-
Click Apply.
-
From the NVIDIA Control Panel navigation tree pane, under Stereoscopic 3D, select Set up stereoscopic 3D to open the associated page.
-
Check the Enable stereoscopic 3D check box to enable NVIDIA stereoscopic 3D, then click Apply.
Quad-buffered stereo: To use quad-buffered professional stereo -
-
From the Settings box, click Stereo-Enable and then select On.
-
Click Apply.
-
From the NVIDIA Control Panel navigation tree pane, under Stereoscopic 3D, select Set up stereoscopic 3D to open the associated page.
-
Clear the Enable stereoscopic 3D check box to disable NVIDIA stereoscopic 3D, then click Apply.