|
MaQs Setup |
  
|
This function is usually performed by a supervisory role and must be used with caution as it changes the configuration of MaQS on the scanning module.
Password is required to access system settings:
Cycle No. |
User can choose to enter the Cycle No. at the point of scanning items to the Steriliser or Performing a Batch Check |
Patient Interface |
(Desktop Scanning only) Prompt with patient information in the Patient Item module |
Speech |
(Desktop Scanning only) Voice Prompt that read out instructions that appear on the screen |
Prompt for Site |
When activated it will ask for Site ID in the Patient Item Module |
RF Options
This settings is only available for handheld scanners.
Remote IP Address |
This should be the IP address which the Message and FTP server are running. |
Online Checking |
The scanner will retrieve information wirelessly |
Configure
This is for desktop scanning only, the Directory for Uploads by default should be C:\Program Files\MaQs
Defect Options
This will set the default checking and return reason for Item/Batch Check.
