[SENSe:]TOTalize:STARt[:IMMediate]
[SENSe:]TOTalize:STARt[:IMMediate]
Syntax
[SENSe:]TOTalize:STARt:IMMediate [(@<ch_list>)]
Description
This command immediately starts totalizing on the specified counter/totalizer channels.
Used With:
- 34907A Multifunction Module (totalizer channel only)
Parameters
Name Type Range of Values Default Value <ch_list> Channel List One or more totalizer channels, as shown:
(@303) - channel 03 on the module in slot 300.
(@103,203,303) - channel 03 on the modules on slot 100, 200, and 300.
If you omit the optional <ch_list> parameter, this command applies to the currently defined scan list.
Example
The following command starts totalizing on totalizer channel 03 on the module in slot 200.
TOT:STARt:IMM (@203)