Instrument Preset State

The following tables show the state of the instrument after a SYSTem:PRESet command is issued.

Scanning Operations	Preset State
Scan List	No Change
Reading Memory	All Readings are Cleared
Min, Max, and Average	All Statistical Data is Cleared
Sweep Count	No Change
Trigger Interval	No Change
Monitor in Progress	Stopped

Module Hardware	Preset State
Multiplexer Modules: 34921A, 34922A, 34923A, 34924A, 34925A	All Channels Open 2-Wire/1-Wire Mode: No Change
Matrix Modules: 34931A, 34932A, 34933A	All Channels Open 2-Wire/1-Wire Mode: No Change
GP Modules: 34937A, 34938A, 34939A	All Channels Open
RF Modules: 34941A, 34942A	Channels b01 and b03 Selected (b = Bank)
Microwave Modules: 34945A, 34946A, 34947A	34945A: All Channel Drives = Default 34946A: Channels 101 and 201 to COM 34947A: Channels 101, 201, and 301 to COM
System Control Modules: 34950A, 34951A, 34952A, 34959A	34950A: DIO Ports = Input, Count = 0, Trace Patterns are Cleared 34951A: DACs = 0 Vdc, Trace Waveforms are Cleared 34952A: DIO Ports = Input, Count = 0, DACs = 0 Vdc 34959A: DIO Ports = Input, All Relay Channels Open