stm32vl_discovery.h File Reference

This file contains definitions for STM32VL-Discovery's Leds, push-buttons. More...

#include "stm32f1xx_hal.h"

Go to the source code of this file.

Defines
#define	LEDn   2
#define	LED3_PIN   GPIO_PIN_9 /* PC.09 */
#define	LED3_GPIO_PORT   GPIOC
#define	LED3_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED3_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LED4_PIN   GPIO_PIN_8 /* PC.08 */
#define	LED4_GPIO_PORT   GPIOC
#define	LED4_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED4_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LEDx_GPIO_CLK_ENABLE(__INDEX__)
#define	LEDx_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == 0) ? LED3_GPIO_CLK_DISABLE() : LED4_GPIO_CLK_DISABLE())
#define	BUTTONn   1
#define	USER_BUTTON_PIN   GPIO_PIN_0 /* PA.00 */
	Key push-button.
#define	USER_BUTTON_GPIO_PORT   GPIOA
#define	USER_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	USER_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	USER_BUTTON_EXTI_IRQn   EXTI0_IRQn
#define	BUTTONx_GPIO_CLK_ENABLE(__INDEX__)   do {USER_BUTTON_GPIO_CLK_ENABLE();} while(0)
#define	BUTTONx_GPIO_CLK_DISABLE(__INDEX__)   (USER_BUTTON_GPIO_CLK_DISABLE())
Enumerations
enum	Led_TypeDef { LED3 = 0, LED4 = 1, LED_GREEN = LED3, LED_BLUE = LED4 }
enum	Button_TypeDef { BUTTON_USER = 0 }
enum	ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }
Functions
uint32_t	BSP_GetVersion (void)
	This method returns the STM32VL-Discovery BSP Driver version.
void	BSP_LED_Init (Led_TypeDef Led)
	Configures LED GPIO.
void	BSP_LED_On (Led_TypeDef Led)
	Turns selected LED On.
void	BSP_LED_Off (Led_TypeDef Led)
	Turns selected LED Off.
void	BSP_LED_Toggle (Led_TypeDef Led)
	Toggles the selected LED.
void	BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
	Configures Button GPIO and EXTI Line.
uint32_t	BSP_PB_GetState (Button_TypeDef Button)
	Returns the selected Button state.

---

Detailed Description

This file contains definitions for STM32VL-Discovery's Leds, push-buttons.

Author:

MCD Application Team

Version:

V1.0.1

Date:

18-December-2015

Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32vl_discovery.h.