STM32L476G_EVAL BSP User Manual: stm32l476g_eval_idd.h File Reference

STM32L476G_EVAL BSP

stm32l476g_eval_idd.h File Reference

Header file for stm32l476g_eval_idd.c module. More...

#include "stm32l476g_eval.h"

Go to the source code of this file.

Defines

#define EVAL_IDD_SHUNT0_VALUE   ((uint16_t) 1000)
 Shunt values on evaluation board in ohms.
#define EVAL_IDD_SHUNT1_VALUE   ((uint16_t) 1)
#define EVAL_IDD_AMPLI_GAIN   ((uint16_t) 50)
 IDD Ampli Gain on evaluation board.
#define EVAL_IDD_FULL_SCALE   ((uint16_t) 4096)
 IDD Full Scale Measure.
#define EVAL_IDD_VDD   ((uint16_t) 3300)
 IDD Vdd Min on eval.

Enumerations

enum  IDD_StatusTypeDef { BSP_IDD_OK = 0, BSP_IDD_TIMEOUT = 1, BSP_IDD_ERROR = 0xFF }
enum  IDD_ModeTypdef {
  BSP_IDD_MODE_CALIBRATION = 0, BSP_IDD_MODE_RUN, BSP_IDD_MODE_SLEEP, BSP_IDD_MODE_STOP,
  BSP_IDD_MODE_STANDBY
}

Functions

uint8_t BSP_IDD_Init (void)
 Configures IDD measurement components.
void BSP_IDD_EnterStopMode1 (void)
 Board Enter Stop Mode 1.
void BSP_IDD_EnterStopMode2 (void)
 Board Enter Stop Mode 2.
void BSP_IDD_ExitStopMode (void)
 Board Exit Stop Mode.
void BSP_IDD_EnterSleepMode (void)
 Board Enter Sleep Mode.
void BSP_IDD_ExitSleepMode (void)
 Board Exit Sleep Mode.
void BSP_IDD_EnterRunMode (void)
 Board Enter Run Mode.
void BSP_IDD_EnterStandbyMode (void)
 Board Enter Standby Mode.
uint32_t BSP_IDD_GetValue (IDD_ModeTypdef LowPowerMode, uint32_t Calibration, uint32_t *IddValue)
 Get IDD current consumption value.

Detailed Description

Header file for stm32l476g_eval_idd.c module.

Author:
MCD Application Team
Version:
$VERSION$
Date:
$DATE$
Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32l476g_eval_idd.h.

Generated on Sun Jun 21 2015 23:46:41 for STM32L476G_EVAL BSP User Manual by   doxygen 1.7.6.1