|
STM32F4-Discovery BSP User Manual
|
This file contains definitions for STM32F4-Discovery Kit's Leds and push-button hardware resources. More...
#include "stm32f4xx_hal.h"
Go to the source code of this file.
Defines | |
| #define | LEDn 4 |
| #define | LED4_PIN GPIO_PIN_12 |
| #define | LED4_GPIO_PORT GPIOD |
| #define | LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LED3_PIN GPIO_PIN_13 |
| #define | LED3_GPIO_PORT GPIOD |
| #define | LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LED5_PIN GPIO_PIN_14 |
| #define | LED5_GPIO_PORT GPIOD |
| #define | LED5_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED5_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LED6_PIN GPIO_PIN_15 |
| #define | LED6_GPIO_PORT GPIOD |
| #define | LED6_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED6_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LEDx_GPIO_CLK_ENABLE(__INDEX__) |
| #define | LEDx_GPIO_CLK_DISABLE(__INDEX__) |
| #define | BUTTONn 1 |
| #define | KEY_BUTTON_PIN GPIO_PIN_0 |
| Wakeup push-button. | |
| #define | KEY_BUTTON_GPIO_PORT GPIOA |
| #define | KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | KEY_BUTTON_EXTI_IRQn EXTI0_IRQn |
| #define | BUTTONx_GPIO_CLK_ENABLE(__INDEX__) |
| #define | BUTTONx_GPIO_CLK_DISABLE(__INDEX__) |
| #define | DISCOVERY_SPIx SPI1 |
| #define | DISCOVERY_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() |
| #define | DISCOVERY_SPIx_GPIO_PORT GPIOA /* GPIOA */ |
| #define | DISCOVERY_SPIx_AF GPIO_AF5_SPI1 |
| #define | DISCOVERY_SPIx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | DISCOVERY_SPIx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | DISCOVERY_SPIx_SCK_PIN GPIO_PIN_5 /* PA.05 */ |
| #define | DISCOVERY_SPIx_MISO_PIN GPIO_PIN_6 /* PA.06 */ |
| #define | DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_7 /* PA.07 */ |
| #define | SPIx_TIMEOUT_MAX 0x1000 /*<! The value of the maximal timeout for BUS waiting loops */ |
| #define | DISCOVERY_I2Cx I2C1 |
| #define | DISCOVERY_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 |
| #define | DISCOVERY_I2Cx_SCL_SDA_GPIO_PORT GPIOB |
| #define | DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_6 |
| #define | DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_9 |
| #define | DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() |
| #define | DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() |
| #define | DISCOVERY_I2Cx_EV_IRQn I2C1_EV_IRQn |
| #define | DISCOVERY_I2Cx_ER_IRQn I2C1_ER_IRQn |
| #define | I2Cx_TIMEOUT_MAX 0x1000 /*<! The value of the maximal timeout for BUS waiting loops */ |
| #define | READWRITE_CMD ((uint8_t)0x80) |
| #define | MULTIPLEBYTE_CMD ((uint8_t)0x40) |
| #define | DUMMY_BYTE ((uint8_t)0x00) |
| #define | ACCELERO_CS_LOW() HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_RESET) |
| #define | ACCELERO_CS_HIGH() HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_SET) |
| #define | ACCELERO_CS_PIN GPIO_PIN_3 /* PE.03 */ |
| ACCELEROMETER Interface pins. | |
| #define | ACCELERO_CS_GPIO_PORT GPIOE /* GPIOE */ |
| #define | ACCELERO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | ACCELERO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | ACCELERO_INT_GPIO_PORT GPIOE /* GPIOE */ |
| #define | ACCELERO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | ACCELERO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | ACCELERO_INT1_PIN GPIO_PIN_0 /* PE.00 */ |
| #define | ACCELERO_INT1_EXTI_IRQn EXTI0_IRQn |
| #define | ACCELERO_INT2_PIN GPIO_PIN_1 /* PE.01 */ |
| #define | ACCELERO_INT2_EXTI_IRQn EXTI1_IRQn |
| #define | AUDIO_I2C_ADDRESS 0x94 |
| AUDIO I2C Interface pins. | |
| #define | AUDIO_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | AUDIO_RESET_PIN GPIO_PIN_4 |
| #define | AUDIO_RESET_GPIO GPIOD |
Enumerations | |
| enum | Led_TypeDef { LED4 = 0, LED3 = 1, LED5 = 2, LED6 = 3 } |
| enum | Button_TypeDef { BUTTON_KEY = 0 } |
| enum | ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } |
Functions | |
| uint32_t | BSP_GetVersion (void) |
| This method returns the STM32F4 DISCO BSP Driver revision. | |
| void | BSP_LED_Init (Led_TypeDef Led) |
| Configures LED GPIO. | |
| void | BSP_LED_On (Led_TypeDef Led) |
| Turns selected LED On. | |
| void | BSP_LED_Off (Led_TypeDef Led) |
| Turns selected LED Off. | |
| void | BSP_LED_Toggle (Led_TypeDef Led) |
| Toggles the selected LED. | |
| void | BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Mode) |
| Configures Button GPIO and EXTI Line. | |
| uint32_t | BSP_PB_GetState (Button_TypeDef Button) |
| Returns the selected Button state. | |
Detailed Description
This file contains definitions for STM32F4-Discovery Kit's Leds and push-button hardware resources.
- Attention:
© COPYRIGHT(c) 2017 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f4_discovery.h.
Generated on Thu Jan 19 2017 15:34:14 for STM32F4-Discovery BSP User Manual by
1.7.6.1