stm32f3xx_nucleo.c File Reference

This file provides set of firmware functions to manage: More...

#include "stm32f3xx_nucleo.h"

Go to the source code of this file.

Defines
#define	__STM32F3XX_NUCLEO_BSP_VERSION_MAIN   (0x01)
	STM32F3XX NUCLEO BSP Driver version number V1.1.3.
#define	__STM32F3XX_NUCLEO_BSP_VERSION_SUB1   (0x01)
#define	__STM32F3XX_NUCLEO_BSP_VERSION_SUB2   (0x03)
#define	__STM32F3XX_NUCLEO_BSP_VERSION_RC   (0x00)
#define	__STM32F3XX_NUCLEO_BSP_VERSION
#define	SD_DUMMY_BYTE   0xFF
	LINK SD Card.
#define	SD_NO_RESPONSE_EXPECTED   0x80
Functions
static void	SPIx_Init (void)
	Initializes SPI HAL.
static void	SPIx_Write (uint8_t Value)
	SPI Write a byte to device.
static uint32_t	SPIx_Read (void)
	SPI Read 4 bytes from device.
static void	SPIx_Error (void)
	SPI error treatment function.
static void	SPIx_MspInit (SPI_HandleTypeDef *hspi)
	Initializes SPI MSP.
void	SD_IO_Init (void)
	Initializes the SD Card and put it into StandBy State (Ready for data transfer).
HAL_StatusTypeDef	SD_IO_WriteCmd (uint8_t Cmd, uint32_t Arg, uint8_t Crc, uint8_t Response)
	Sends 5 bytes command to the SD card and get response.
HAL_StatusTypeDef	SD_IO_WaitResponse (uint8_t Response)
	Waits response from the SD card.
void	SD_IO_WriteDummy (void)
	Sends dummy byte with CS High.
void	SD_IO_CSState (uint8_t val)
	Set the SD_CS pin.
void	SD_IO_WriteReadData (const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength)
	Write a byte on the SD.
uint8_t	SD_IO_WriteByte (uint8_t Data)
	Writes a byte on the SD.
uint8_t	SD_IO_ReadByte (void)
	Reads a byte from the SD.
void	LCD_IO_Init (void)
	Initializes the LCD.
void	LCD_IO_WriteData (uint8_t Data)
	Writes data to select the LCD register.
void	LCD_IO_WriteMultipleData (uint8_t *pData, uint32_t Size)
	Write register value.
void	LCD_IO_WriteReg (uint8_t LCDReg)
	Writes command to select the LCD register.
void	LCD_Delay (uint32_t Delay)
	Wait for loop in ms.
static HAL_StatusTypeDef	ADCx_Init (void)
	Initializes ADC HAL.
static void	ADCx_DeInit (void)
	Initializes ADC HAL.
static void	ADCx_MspInit (ADC_HandleTypeDef *hadc)
	Initializes ADC MSP.
static void	ADCx_MspDeInit (ADC_HandleTypeDef *hadc)
	DeInitializes ADC MSP.
uint32_t	BSP_GetVersion (void)
	This method returns the STM32F3XX NUCLEO BSP Driver revision.
void	BSP_LED_Init (Led_TypeDef Led)
	Configures LED GPIO.
void	BSP_LED_DeInit (Led_TypeDef Led)
	DeInit LEDs.
void	BSP_LED_On (Led_TypeDef Led)
	Turns selected LED On.
void	BSP_LED_Off (Led_TypeDef Led)
	Turns selected LED Off.
void	BSP_LED_Toggle (Led_TypeDef Led)
	Toggles the selected LED.
void	BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
	Configures Button GPIO and EXTI Line.
void	BSP_PB_DeInit (Button_TypeDef Button)
	Push Button DeInit.
uint32_t	BSP_PB_GetState (Button_TypeDef Button)
	Returns the selected Button state.
static void	SPIx_WriteReadData (const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLegnth)
	SPI Write a byte to device.
uint8_t	BSP_JOY_Init (void)
	Configures joystick available on adafruit 1.8" TFT shield managed through ADC to detect motion.
void	BSP_JOY_DeInit (void)
	DeInit joystick GPIOs.
JOYState_TypeDef	BSP_JOY_GetState (void)
	Returns the Joystick key pressed.
Variables
GPIO_TypeDef *	LED_PORT [LEDn] = {LED2_GPIO_PORT}
	LED variables.
const uint16_t	LED_PIN [LEDn] = {LED2_PIN}
GPIO_TypeDef *	BUTTON_PORT [BUTTONn] = {USER_BUTTON_GPIO_PORT }
	BUTTON variables.
const uint16_t	BUTTON_PIN [BUTTONn] = {USER_BUTTON_PIN }
const uint8_t	BUTTON_IRQn [BUTTONn] = {USER_BUTTON_EXTI_IRQn }
uint32_t	SpixTimeout = NUCLEO_SPIx_TIMEOUT_MAX
	BUS variables.
static SPI_HandleTypeDef	hnucleo_Spi
static ADC_HandleTypeDef	hnucleo_Adc
static ADC_ChannelConfTypeDef	sConfig

---

Detailed Description

This file provides set of firmware functions to manage:

Author:

MCD Application Team

Version:

V1.1.3

Date:

16-December-2016

• LEDs and push-button available on STM32F3XX-Nucleo Kit from STMicroelectronics
• LCD, joystick and microSD available on Adafruit 1.8" TFT LCD shield (reference ID 802)

Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f3xx_nucleo.c.