STM32F0308-Discovery BSP User Manual: stm32f0308_discovery.h File Reference

STM32F0308 Discovery BSP Drivers

stm32f0308_discovery.h File Reference

This file contains definitions for STM32F0308-Discovery's Leds, push- buttons hardware resources. More...

#include "stm32f0xx_hal.h"

Go to the source code of this file.

Defines

#define LEDn   2
#define LED3_PIN   GPIO_PIN_9
#define LED3_GPIO_PORT   GPIOC
#define LED3_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define LED4_PIN   GPIO_PIN_8
#define LED4_GPIO_PORT   GPIOC
#define LED4_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__LED__)
#define LEDx_GPIO_CLK_DISABLE(__LED__)
#define BUTTONn   1
#define USER_BUTTON_PIN   GPIO_PIN_0 /* PA0 */
 USER push-button.
#define USER_BUTTON_GPIO_PORT   GPIOA
#define USER_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define USER_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define USER_BUTTON_EXTI_IRQn   EXTI0_1_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__)   do { if((__BUTTON__) == BUTTON_USER) USER_BUTTON_GPIO_CLK_ENABLE();} while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__)   (((__BUTTON__) == BUTTON_USER) ? USER_BUTTON_GPIO_CLK_DISABLE() : 0 )

Enumerations

enum  Led_TypeDef { LED3 = 0, LED4 = 1, LED_GREEN = LED3, LED_BLUE = LED4 }
 LED Types Definition. More...
enum  Button_TypeDef { BUTTON_USER = 0 }
 BUTTON Types Definition. More...
enum  ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }

Functions

uint32_t BSP_GetVersion (void)
 This method returns the STM32F0308 DISCO BSP Driver revision.
void BSP_LED_Init (Led_TypeDef Led)
 Configures LED GPIO.
void BSP_LED_On (Led_TypeDef Led)
 Turns selected LED On.
void BSP_LED_Off (Led_TypeDef Led)
 Turns selected LED Off.
void BSP_LED_Toggle (Led_TypeDef Led)
 Toggles the selected LED.
void BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Mode)
 Configures Button GPIO and EXTI Line.
uint32_t BSP_PB_GetState (Button_TypeDef Button)
 Returns the selected Button state.

Detailed Description

This file contains definitions for STM32F0308-Discovery's Leds, push- buttons hardware resources.

Author:
MCD Application Team
Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f0308_discovery.h.

Generated on Wed Jul 5 2017 09:26:24 for STM32F0308-Discovery BSP User Manual by   doxygen 1.7.6.1