Functions
uint8_t	BSP_AUDIO_OUT_Init (uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
	Configures the audio peripherals.
uint8_t	BSP_AUDIO_OUT_Play (uint16_t *pBuffer, uint32_t Size)
	Starts playing audio stream from a data buffer for a determined size.
void	BSP_AUDIO_OUT_ChangeBuffer (uint16_t *pData, uint16_t Size)
	Sends n-Bytes on the SAI interface.
uint8_t	BSP_AUDIO_OUT_Pause (void)
	This function Pauses the audio file stream.
uint8_t	BSP_AUDIO_OUT_Resume (void)
	This function Resumes the audio file stream.
uint8_t	BSP_AUDIO_OUT_Stop (uint32_t Option)
	Stops audio playing and Power down the Audio Codec.
uint8_t	BSP_AUDIO_OUT_SetVolume (uint8_t Volume)
	Controls the current audio volume level.
uint8_t	BSP_AUDIO_OUT_SetMute (uint32_t Cmd)
	Enables or disables the MUTE mode by software.
uint8_t	BSP_AUDIO_OUT_SetOutputMode (uint8_t Output)
	Switch dynamically (while audio file is played) the output target (speaker or headphone).
void	BSP_AUDIO_OUT_SetFrequency (uint32_t AudioFreq)
	Updates the audio frequency.
void	BSP_AUDIO_OUT_SetAudioFrameSlot (uint32_t AudioFrameSlot)
	Updates the Audio frame slot configuration.
void	BSP_AUDIO_OUT_DeInit (void)
	Deinit the audio peripherals.
void	HAL_SAI_TxCpltCallback (SAI_HandleTypeDef *hsai)
	Tx Transfer completed callbacks.
void	HAL_SAI_TxHalfCpltCallback (SAI_HandleTypeDef *hsai)
	Tx Half Transfer completed callbacks.
void	HAL_SAI_ErrorCallback (SAI_HandleTypeDef *hsai)
	SAI error callbacks.
__weak void	BSP_AUDIO_OUT_TransferComplete_CallBack (void)
	Manages the DMA full Transfer complete event.
__weak void	BSP_AUDIO_OUT_HalfTransfer_CallBack (void)
	Manages the DMA Half Transfer complete event.
__weak void	BSP_AUDIO_OUT_Error_CallBack (void)
	Manages the DMA FIFO error event.
__weak void	BSP_AUDIO_OUT_MspInit (SAI_HandleTypeDef hsai, void Params)
	Initializes BSP_AUDIO_OUT MSP.
__weak void	BSP_AUDIO_OUT_MspDeInit (SAI_HandleTypeDef hsai, void Params)
	Deinitializes SAI MSP.
__weak void	BSP_AUDIO_OUT_ClockConfig (SAI_HandleTypeDef hsai, uint32_t AudioFreq, void Params)
	Clock Config.
uint8_t	BSP_AUDIO_IN_Init (uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr)
	Initializes wave recording.
uint8_t	BSP_AUDIO_IN_Record (uint16_t *pbuf, uint32_t size)
	Starts audio recording.
uint8_t	BSP_AUDIO_IN_Stop (void)
	Stops audio recording.
uint8_t	BSP_AUDIO_IN_Pause (void)
	Pauses the audio file stream.
uint8_t	BSP_AUDIO_IN_Resume (void)
	Resumes the audio file stream.
uint8_t	BSP_AUDIO_IN_SetVolume (uint8_t Volume)
	Controls the audio in volume level.
void	BSP_AUDIO_IN_DeInit (void)
	Deinit the audio IN peripherals.
uint8_t	BSP_AUDIO_IN_PDMToPCM (uint16_t PDMBuf, uint16_t PCMBuf)
	Converts audio format from PDM to PCM.
void	HAL_I2S_RxCpltCallback (I2S_HandleTypeDef *hi2s)
	Rx Transfer completed callbacks.
void	HAL_I2S_RxHalfCpltCallback (I2S_HandleTypeDef *hi2s)
	Rx Half Transfer completed callbacks.
void	HAL_I2S_ErrorCallback (I2S_HandleTypeDef *hi2s)
	I2S error callbacks.
__weak void	BSP_AUDIO_IN_TransferComplete_CallBack (void)
	User callback when record buffer is filled.
__weak void	BSP_AUDIO_IN_HalfTransfer_CallBack (void)
	Manages the DMA Half Transfer complete event.
__weak void	BSP_AUDIO_IN_Error_Callback (void)
	Audio IN Error callback function.
__weak void	BSP_AUDIO_IN_MspInit (I2S_HandleTypeDef hi2s, void Params)
	Initializes BSP_AUDIO_IN MSP.
__weak void	BSP_AUDIO_IN_MspDeInit (I2S_HandleTypeDef hi2s, void Params)
	DeInitializes BSP_AUDIO_IN MSP.
static void	SAIx_Init (uint32_t AudioFreq)
	Initializes the Audio Codec audio interface (SAI).
static void	SAIx_DeInit (void)
	Deinitializes the Audio Codec audio interface (SAI).
static void	PDMDecoder_Init (uint32_t AudioFreq, uint32_t ChnlNbr)
	Initializes the PDM library.
static void	I2Sx_Init (uint32_t AudioFreq)
	Initializes the Audio Codec audio interface (I2S)
static void	I2Sx_DeInit (void)
	Deinitializes the Audio Codec audio interface (I2S).
static void	TIMx_IC_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM INput Capture MSP.
static void	TIMx_IC_MspDeInit (TIM_HandleTypeDef *htim)
	Initializes the TIM INput Capture MSP.
static void	TIMx_Init (void)
	Configure TIM as a clock divider by 2.
static void	TIMx_DeInit (void)
	Configure TIM as a clock divider by 2.

Function Documentation

void BSP_AUDIO_IN_DeInit ( void )

Deinit the audio IN peripherals.

Return values:

None

Definition at line 905 of file stm32756g_eval_audio.c.

References BSP_AUDIO_IN_MspDeInit(), haudio_in_i2s, I2Sx_DeInit(), and TIMx_DeInit().

__weak void BSP_AUDIO_IN_Error_Callback ( void )

Audio IN Error callback function.

Return values:

None

Definition at line 1005 of file stm32756g_eval_audio.c.

Referenced by HAL_I2S_ErrorCallback().

__weak void BSP_AUDIO_IN_HalfTransfer_CallBack ( void )

Manages the DMA Half Transfer complete event.

Return values:

None

Definition at line 994 of file stm32756g_eval_audio.c.

Referenced by HAL_I2S_RxHalfCpltCallback().

uint8_t BSP_AUDIO_IN_Init	(	uint32_t	AudioFreq,
		uint32_t	BitRes,
		uint32_t	ChnlNbr
	)

Initializes wave recording.

Note:: This function assumes that the I2S input clock (through PLL_R in Devices RevA/Z and through dedicated PLLI2S_R in Devices RevB/Y) is already configured and ready to be used.

Parameters:

AudioFreq,:	Audio frequency to be configured for the I2S peripheral.
BitRes,:	Audio frequency to be configured for the I2S peripheral.
ChnlNbr,:	Audio frequency to be configured for the I2S peripheral.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 794 of file stm32756g_eval_audio.c.

References AUDIO_I2Sx, AUDIO_OK, BSP_AUDIO_IN_MspInit(), haudio_in_i2s, I2Sx_DeInit(), I2Sx_Init(), and PDMDecoder_Init().

__weak void BSP_AUDIO_IN_MspDeInit	(	I2S_HandleTypeDef *	hi2s,
		void *	Params
	)

DeInitializes BSP_AUDIO_IN MSP.

Parameters:

hi2s,:	I2S handle
Params

Return values:

None

Definition at line 1086 of file stm32756g_eval_audio.c.

References AUDIO_I2Sx, AUDIO_I2Sx_CLK_DISABLE, AUDIO_I2Sx_DMAx_IRQ, AUDIO_I2Sx_SCK_GPIO_PORT, AUDIO_I2Sx_SCK_PIN, AUDIO_I2Sx_SD_GPIO_PORT, and AUDIO_I2Sx_SD_PIN.

Referenced by BSP_AUDIO_IN_DeInit().

__weak void BSP_AUDIO_IN_MspInit	(	I2S_HandleTypeDef *	hi2s,
		void *	Params
	)

Initializes BSP_AUDIO_IN MSP.

Parameters:

hi2s,:	I2S handle
Params

Return values:

None

Definition at line 1017 of file stm32756g_eval_audio.c.

References AUDIO_I2Sx, AUDIO_I2Sx_CLK_ENABLE, AUDIO_I2Sx_DMAx_CHANNEL, AUDIO_I2Sx_DMAx_CLK_ENABLE, AUDIO_I2Sx_DMAx_IRQ, AUDIO_I2Sx_DMAx_MEM_DATA_SIZE, AUDIO_I2Sx_DMAx_PERIPH_DATA_SIZE, AUDIO_I2Sx_DMAx_STREAM, AUDIO_I2Sx_SCK_AF, AUDIO_I2Sx_SCK_GPIO_CLK_ENABLE, AUDIO_I2Sx_SCK_GPIO_PORT, AUDIO_I2Sx_SCK_PIN, AUDIO_I2Sx_SD_AF, AUDIO_I2Sx_SD_GPIO_CLK_ENABLE, AUDIO_I2Sx_SD_GPIO_PORT, AUDIO_I2Sx_SD_PIN, AUDIO_IN_IRQ_PREPRIO, and TIMx_Init().

Referenced by BSP_AUDIO_IN_Init().

uint8_t BSP_AUDIO_IN_Pause ( void )

Pauses the audio file stream.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 866 of file stm32756g_eval_audio.c.

References AUDIO_OK, and haudio_in_i2s.

uint8_t BSP_AUDIO_IN_PDMToPCM	(	uint16_t *	PDMBuf,
		uint16_t *	PCMBuf
	)

Converts audio format from PDM to PCM.

Parameters:

PDMBuf,:	Pointer to data PDM buffer
PCMBuf,:	Pointer to data PCM buffer

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 919 of file stm32756g_eval_audio.c.

References AUDIO_OK, AudioInVolume, Channel_Demux, CHANNEL_DEMUX_MASK, DEFAULT_AUDIO_IN_CHANNEL_NBR, Filter, and INTERNAL_BUFF_SIZE.

uint8_t BSP_AUDIO_IN_Record	(	uint16_t *	pbuf,
		uint32_t	size
	)

Starts audio recording.

Parameters:

pbuf,:	Main buffer pointer for the recorded data storing
size,:	Current size of the recorded buffer

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 830 of file stm32756g_eval_audio.c.

References AUDIO_ERROR, AUDIO_OK, and haudio_in_i2s.

uint8_t BSP_AUDIO_IN_Resume ( void )

Resumes the audio file stream.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 878 of file stm32756g_eval_audio.c.

References AUDIO_OK, and haudio_in_i2s.

uint8_t BSP_AUDIO_IN_SetVolume ( uint8_t Volume )

Controls the audio in volume level.

Parameters:

Volume,: Volume level to be set in percentage from 0% to 100% (0 for Mute and 100 for Max volume level).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 892 of file stm32756g_eval_audio.c.

References AUDIO_OK, and AudioInVolume.

uint8_t BSP_AUDIO_IN_Stop ( void )

Stops audio recording.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 847 of file stm32756g_eval_audio.c.

References AUDIO_ERROR, AUDIO_OK, AUDIO_TIMx_CLK_DISABLE, and haudio_in_i2s.

__weak void BSP_AUDIO_IN_TransferComplete_CallBack ( void )

User callback when record buffer is filled.

Return values:

None

Definition at line 983 of file stm32756g_eval_audio.c.

Referenced by HAL_I2S_RxCpltCallback().

void BSP_AUDIO_OUT_ChangeBuffer	(	uint16_t *	pData,
		uint16_t	Size
	)

Sends n-Bytes on the SAI interface.

Parameters:

pData,:	pointer on data address
Size,:	number of data to be written

Return values:

None

Definition at line 270 of file stm32756g_eval_audio.c.

References haudio_out_sai.

__weak void BSP_AUDIO_OUT_ClockConfig	(	SAI_HandleTypeDef *	hsai,
		uint32_t	AudioFreq,
		void *	Params
	)

Clock Config.

Parameters:

hsai,:	might be required to set audio peripheral predivider if any.
AudioFreq,:	Audio frequency used to play the audio stream.
Params

Note:: This API is called by BSP_AUDIO_OUT_Init() and BSP_AUDIO_OUT_SetFrequency() Being __weak it can be overwritten by the application

Return values:

None

Definition at line 662 of file stm32756g_eval_audio.c.

Referenced by BSP_AUDIO_OUT_Init(), and BSP_AUDIO_OUT_SetFrequency().

void BSP_AUDIO_OUT_DeInit ( void )

Deinit the audio peripherals.

Return values:

None

Definition at line 463 of file stm32756g_eval_audio.c.

References BSP_AUDIO_OUT_MspDeInit(), haudio_out_sai, and SAIx_DeInit().

__weak void BSP_AUDIO_OUT_Error_CallBack ( void )

Manages the DMA FIFO error event.

Return values:

None

Definition at line 524 of file stm32756g_eval_audio.c.

Referenced by HAL_SAI_ErrorCallback().

__weak void BSP_AUDIO_OUT_HalfTransfer_CallBack ( void )

Manages the DMA Half Transfer complete event.

Return values:

None

Definition at line 516 of file stm32756g_eval_audio.c.

Referenced by HAL_SAI_TxHalfCpltCallback().

uint8_t BSP_AUDIO_OUT_Init	(	uint16_t	OutputDevice,
		uint8_t	Volume,
		uint32_t	AudioFreq
	)

Configures the audio peripherals.

Parameters:

OutputDevice,:	OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, or OUTPUT_DEVICE_BOTH.
Volume,:	Initial volume level (from 0 (Mute) to 100 (Max))
AudioFreq,:	Audio frequency used to play the audio stream.

Note:: The I2S PLL input clock must be done in the user application.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 196 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, AUDIO_SAIx, BSP_AUDIO_OUT_ClockConfig(), BSP_AUDIO_OUT_MspInit(), haudio_out_sai, SAIx_DeInit(), and SAIx_Init().

__weak void BSP_AUDIO_OUT_MspDeInit	(	SAI_HandleTypeDef *	hsai,
		void *	Params
	)

Deinitializes SAI MSP.

Parameters:

hsai,:	SAI handle
Params

Return values:

None

Definition at line 617 of file stm32756g_eval_audio.c.

References AUDIO_SAIx, AUDIO_SAIx_CLK_DISABLE, AUDIO_SAIx_DMAx_IRQ, AUDIO_SAIx_FS_GPIO_PORT, AUDIO_SAIx_FS_PIN, AUDIO_SAIx_MCLK_GPIO_PORT, AUDIO_SAIx_MCLK_PIN, AUDIO_SAIx_SCK_PIN, AUDIO_SAIx_SCK_SD_GPIO_PORT, and AUDIO_SAIx_SD_PIN.

Referenced by BSP_AUDIO_OUT_DeInit().

__weak void BSP_AUDIO_OUT_MspInit	(	SAI_HandleTypeDef *	hsai,
		void *	Params
	)

Initializes BSP_AUDIO_OUT MSP.

Parameters:

hsai,:	SAI handle
Params

Return values:

None

Definition at line 534 of file stm32756g_eval_audio.c.

References AUDIO_OUT_IRQ_PREPRIO, AUDIO_SAIx, AUDIO_SAIx_CLK_ENABLE, AUDIO_SAIx_DMAx_CHANNEL, AUDIO_SAIx_DMAx_CLK_ENABLE, AUDIO_SAIx_DMAx_IRQ, AUDIO_SAIx_DMAx_MEM_DATA_SIZE, AUDIO_SAIx_DMAx_PERIPH_DATA_SIZE, AUDIO_SAIx_DMAx_STREAM, AUDIO_SAIx_FS_ENABLE, AUDIO_SAIx_FS_GPIO_PORT, AUDIO_SAIx_FS_PIN, AUDIO_SAIx_FS_SD_MCLK_AF, AUDIO_SAIx_MCLK_ENABLE, AUDIO_SAIx_MCLK_GPIO_PORT, AUDIO_SAIx_MCLK_PIN, AUDIO_SAIx_SCK_AF, AUDIO_SAIx_SCK_PIN, AUDIO_SAIx_SCK_SD_ENABLE, AUDIO_SAIx_SCK_SD_GPIO_PORT, and AUDIO_SAIx_SD_PIN.

Referenced by BSP_AUDIO_OUT_Init().

uint8_t BSP_AUDIO_OUT_Pause ( void )

This function Pauses the audio file stream.

In case of using DMA, the DMA Pause feature is used.

Note:: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behaviour).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 283 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_Play	(	uint16_t *	pBuffer,
		uint32_t	Size
	)

Starts playing audio stream from a data buffer for a determined size.

Parameters:

pBuffer,:	Pointer to the buffer
Size,:	Number of audio data BYTES.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 248 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, AUDIODATA_SIZE, DMA_MAX, and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_Resume ( void )

This function Resumes the audio file stream.

Note:: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behaviour).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 307 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

void BSP_AUDIO_OUT_SetAudioFrameSlot ( uint32_t AudioFrameSlot )

Updates the Audio frame slot configuration.

Parameters:

AudioFrameSlot,: specifies the audio Frame slot

Note:: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frame slot.

Return values:

None

Definition at line 446 of file stm32756g_eval_audio.c.

References haudio_out_sai.

void BSP_AUDIO_OUT_SetFrequency ( uint32_t AudioFreq )

Updates the audio frequency.

Parameters:

AudioFreq,: Audio frequency used to play the audio stream.

Note:: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frequency.

Return values:

None

Definition at line 423 of file stm32756g_eval_audio.c.

References BSP_AUDIO_OUT_ClockConfig(), and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_SetMute ( uint32_t Cmd )

Enables or disables the MUTE mode by software.

Parameters:

Cmd,: Could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to unmute the codec and restore previous volume level.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 381 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_SetOutputMode ( uint8_t Output )

Switch dynamically (while audio file is played) the output target (speaker or headphone).

Parameters:

Output,: The audio output target: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 402 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_SetVolume ( uint8_t Volume )

Controls the current audio volume level.

Parameters:

Volume,: Volume level to be set in percentage from 0% to 100% (0 for Mute and 100 for Max volume level).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 361 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_Stop ( uint32_t Option )

Stops audio playing and Power down the Audio Codec.

Parameters:

Option,:

could be one of the following parameters

CODEC_PDWN_SW: for software power off (by writing registers). Then no need to reconfigure the Codec after power on.
CODEC_PDWN_HW: completely shut down the codec (physically). Then need to reconfigure the Codec after power on.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 333 of file stm32756g_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

__weak void BSP_AUDIO_OUT_TransferComplete_CallBack ( void )

Manages the DMA full Transfer complete event.

Return values:

None

Definition at line 508 of file stm32756g_eval_audio.c.

Referenced by HAL_SAI_TxCpltCallback().

void HAL_I2S_ErrorCallback ( I2S_HandleTypeDef * hi2s )

I2S error callbacks.

Parameters:

hi2s,: I2S handle

Return values:

None

Definition at line 972 of file stm32756g_eval_audio.c.

References BSP_AUDIO_IN_Error_Callback().

void HAL_I2S_RxCpltCallback ( I2S_HandleTypeDef * hi2s )

Rx Transfer completed callbacks.

Parameters:

hi2s,: I2S handle

Return values:

None

Definition at line 949 of file stm32756g_eval_audio.c.

References BSP_AUDIO_IN_TransferComplete_CallBack().

void HAL_I2S_RxHalfCpltCallback ( I2S_HandleTypeDef * hi2s )

Rx Half Transfer completed callbacks.

Parameters:

hi2s,: I2S handle

Return values:

None

Definition at line 960 of file stm32756g_eval_audio.c.

References BSP_AUDIO_IN_HalfTransfer_CallBack().

void HAL_SAI_ErrorCallback ( SAI_HandleTypeDef * hsai )

SAI error callbacks.

Parameters:

hsai,: SAI handle

Return values:

None

Definition at line 499 of file stm32756g_eval_audio.c.

References BSP_AUDIO_OUT_Error_CallBack().

void HAL_SAI_TxCpltCallback ( SAI_HandleTypeDef * hsai )

Tx Transfer completed callbacks.

Parameters:

hsai,: SAI handle

Return values:

None

Definition at line 475 of file stm32756g_eval_audio.c.

References BSP_AUDIO_OUT_TransferComplete_CallBack().

void HAL_SAI_TxHalfCpltCallback ( SAI_HandleTypeDef * hsai )

Tx Half Transfer completed callbacks.

Parameters:

hsai,: SAI handle

Return values:

None

Definition at line 487 of file stm32756g_eval_audio.c.

References BSP_AUDIO_OUT_HalfTransfer_CallBack().

static void I2Sx_DeInit ( void ) [static]

Deinitializes the Audio Codec audio interface (I2S).

Return values:

None

Definition at line 1183 of file stm32756g_eval_audio.c.

References AUDIO_I2Sx, and haudio_in_i2s.

Referenced by BSP_AUDIO_IN_DeInit(), and BSP_AUDIO_IN_Init().

static void I2Sx_Init ( uint32_t AudioFreq ) [static]

Initializes the Audio Codec audio interface (I2S)

Note:: This function assumes that the I2S input clock (through PLL_R in Devices RevA/Z and through dedicated PLLI2S_R in Devices RevB/Y) is already configured and ready to be used.

Parameters:

AudioFreq,: Audio frequency to be configured for the I2S peripheral.

Return values:

None

Definition at line 1155 of file stm32756g_eval_audio.c.

References AUDIO_I2Sx, and haudio_in_i2s.

Referenced by BSP_AUDIO_IN_Init().