STM32469I_EVAL BSP User Manual
|
This file contains the common defines and functions prototypes for the stm32469i_eval_io.c driver. More...
Go to the source code of this file.
Defines | |
#define | IO_PIN_0 ((uint32_t)0x0001) |
#define | IO_PIN_1 ((uint32_t)0x0002) |
#define | IO_PIN_2 ((uint32_t)0x0004) |
#define | IO_PIN_3 ((uint32_t)0x0008) |
#define | IO_PIN_4 ((uint32_t)0x0010) |
#define | IO_PIN_5 ((uint32_t)0x0020) |
#define | IO_PIN_6 ((uint32_t)0x0040) |
#define | IO_PIN_7 ((uint32_t)0x0080) |
#define | IO_PIN_8 ((uint32_t)0x0100) |
#define | IO_PIN_9 ((uint32_t)0x0200) |
#define | IO_PIN_10 ((uint32_t)0x0400) |
#define | IO_PIN_11 ((uint32_t)0x0800) |
#define | IO_PIN_12 ((uint32_t)0x1000) |
#define | IO_PIN_13 ((uint32_t)0x2000) |
#define | IO_PIN_14 ((uint32_t)0x4000) |
#define | IO_PIN_15 ((uint32_t)0x8000) |
#define | IO_PIN_16 ((uint32_t)0x010000) |
#define | IO_PIN_17 ((uint32_t)0x020000) |
#define | IO_PIN_18 ((uint32_t)0x040000) |
#define | IO_PIN_19 ((uint32_t)0x080000) |
#define | IO_PIN_20 ((uint32_t)0x100000) |
#define | IO_PIN_21 ((uint32_t)0x200000) |
#define | IO_PIN_22 ((uint32_t)0x400000) |
#define | IO_PIN_23 ((uint32_t)0x800000) |
#define | IO_PIN_ALL ((uint32_t)0xFFFFFF) |
Enumerations | |
enum | BSP_IO_PinStateTypeDef { BSP_IO_PIN_RESET = 0, BSP_IO_PIN_SET = 1 } |
enum | IO_StatusTypeDef { IO_OK = 0, IO_ERROR = 1, IO_TIMEOUT = 2 } |
Functions | |
uint8_t | BSP_IO_Init (void) |
Initializes and configures the IO functionalities and configures all necessary hardware resources (GPIOs, clocks..). | |
uint8_t | BSP_IO_DeInit (void) |
DeInit allows Mfx Inititialization to be executed again. | |
uint32_t | BSP_IO_ITGetStatus (uint32_t IO_Pin) |
Gets the selected pins IT status. | |
void | BSP_IO_ITClear (void) |
Clears all the IO IT pending bits. | |
void | BSP_IO_ITClearPin (uint32_t IO_Pins_To_Clear) |
Clear only one or a selection of IO IT pending bits. | |
uint8_t | BSP_IO_ConfigPin (uint32_t IO_Pin, IO_ModeTypedef IO_Mode) |
Configures the IO pin(s) according to IO mode structure value. | |
void | BSP_IO_WritePin (uint32_t IO_Pin, BSP_IO_PinStateTypeDef PinState) |
Sets the selected pins state. | |
uint32_t | BSP_IO_ReadPin (uint32_t IO_Pin) |
Gets the selected pins current state. | |
void | BSP_IO_TogglePin (uint32_t IO_Pin) |
Toggles the selected pins state. |
Detailed Description
This file contains the common defines and functions prototypes for the stm32469i_eval_io.c driver.
- Attention:
© COPYRIGHT(c) 2015 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32469i_eval_io.h.
Generated on Tue Jan 12 2016 17:51:25 for STM32469I_EVAL BSP User Manual by
![doxygen](doxygen.png)