Icon Property
Short Name: Icon
Installed With: Base Package
Class: ProjectItem Properties
Gets the icon of the project item in the Project Explorer window using the Icon cluster, which limits size and color depth.
 | Note The LabVIEW Datalogging and Supervisory Control Module supports this property in the Run-Time Engine. |
Elements
| Name | Description |
|---|---|
| Image Type | Reserved for future use. |
| Image Depth | Specifies the color depth of the image, which is the number of bits to use to describe the color of each pixel in the image. Valid values include 1, 4, 8, and 24 bits per pixel. Image Depth affects how LabVIEW interprets the values of Image and Colors. |
| Image | A 1-D array of bytes that describes the color of each pixel in the image in raster order. The value of Image Depth determines how LabVIEW interprets the value of this input. If Image Depth is 24, each pixel has three bytes to describe its color. The first byte for each pixel describes the red value, the second byte describes the green value, and the third byte describes the blue value. If Image Depth is 8, each pixel has one byte to describe its color. The value of each bit corresponds to an element in Colors, which stores 32-bit RGB values where the most-significant byte is zero, followed in order by red, green, and blue values. Valid values include 0 through 255. If Image Depth is 4, the behavior is similar to when Image Depth is 8 except valid values in image include 0 through 15. If Image Depth is 1, any value of zero in Image corresponds to element 0 in Colors. All other values correspond to element 1 in Colors. |
| Mask | An array of bytes in which each bit describes mask information for a pixel. The first byte describes the first eight pixels, the second byte describes the next eight pixels, and so on. If a bit is zero, LabVIEW draws the corresponding pixel as transparent. If the array is empty, LabVIEW draws all pixels without transparency. If the array does not contain a bit for each pixel in the image, LabVIEW draws any pixels missing from the array without transparency. |
| Colors | An array of RGB color values that correspond to the values in image. The value of Image Depth determines how LabVIEW interprets the value of this input. If Image Depth is 24, LabVIEW ignores this input. If Image Depth is 8, the array can have 256 elements. If Image Depth is 4, the array can have 16 elements. If Image Depth is 1, the array can have 2 elements. |
| Rectangle | A cluster that contains coordinates that describe the bounding rectangle in which you want to draw the image. The VI clips the image to the width and height of the rectangle. The bottom and right edges of the rectangle bounds do not contain image pixels. Horizontal coordinates increase to the right, and vertical coordinates increase to the bottom.
|
Remarks
The following table lists the characteristics of this property.
| Available in Run-Time Engine and Real-Time Operating System | No |
| Permissions | Read Only |
| Settable when the VI is running | No |
| Loads the front panel into memory | No |
| Need to authenticate before use | No |
| Loads the block diagram into memory | No |
| Remote access disallowed | No |
| Must wait until user interface is idle | No |
| Available with control VIs | No |
| Available with global VIs | No |
| Available with strict type definitions | No |
| Available with polymorphic VIs | No |