DAQmxSetup1112Cal
From NI-DAQmx C Functions
DAQmxSetup1112Cal
int32 DAQmxSetup1112Cal (uInt32 calHandle, const char channel[]);
Purpose
Specifies the channel on the SCXI-1112 module for calibration. Measure calibration input/output points by supplying reference signals to the specified channel and measuring the outputs. Specify each of these points using the DAQmxAdjust1112Cal function.
|
Note The terminal where module output is measured depends on the configuration of the module in MAX. National Instruments recommends cabling the module to the digitizer so that the output appears on the MCH0+/- pins of the rear signal connector. Refer to the module user manual for more information on the routing of module output. |
Parameters
| Input | ||
| Name | Type | Description |
|---|---|---|
| calHandle |
|
A reference to the calibration session that you created using the DAQmxInitExtCal function. |
| channel | const char [] | The physical channel to calibrate. |
Return Value
| Name | Type | Description |
|---|---|---|
| status | int32 | The error code returned by the function in the event of an error or warning. A value of 0 indicates success. A positive value indicates a warning. A negative value indicates an error. |