DAQmxSetup1104Cal
int32 DAQmxSetup1104Cal (uInt32 calHandle, const char
channel[]);
Purpose
Specifies the channel on the SCXI-1104 module for
calibration. Measure calibration input/output points by supplying
reference signals to the specified channel and measuring the outputs. Specify
each of these points using the DAQmxAdjust1104Cal
function.
|
Note The terminal where module output is
measured depends on the configuration of the module in MAX. National
Instruments recommends cabling the module to the digitizer so that the output
appears on the MCH0+/- pins of the rear signal connector. Refer to the
module user manual for more information on the routing of module output. |
Parameters
|
Input
|
| Name |
Type |
Description |
|
calHandle
|
uInt32
|
A reference to the calibration session that you created using the
DAQmxInitExtCal function. |
| channel |
const char [] |
The physical channel to calibrate. |
Return Value
| Name |
Type |
Description |
|
status
|
int32 |
The error code returned by the function in the event of an error or warning. A value of 0 indicates success. A positive value indicates a warning. A negative value indicates an error. |