Instrument Preset State
Instrument Preset State
The following tables show the state of the instrument after a PRESET from the Sto/Rcl menu or a SYSTem:PRESet command from the remote interface.
|
Measurement Configuration |
Instrument Preset State |
|
Function |
No Change |
|
Range |
No Change |
|
Resolution |
No Change |
|
Advanced Settings |
No Change |
|
Totalizer Reset Mode |
Count Not Reset When Read |
|
Totalizer Edge Detect |
Rising Edge |
|
Scanning Operations |
Instrument Preset State |
|
Scan List |
No Change |
|
Reading Memory |
All Readings are Cleared |
|
Min, Max, and Average |
No Change |
|
Scan Interval Source |
No Change |
|
Scan Interval |
No Change |
|
Scan Count |
No Change |
|
Scan Reading Format |
No Change |
|
Monitor in Progress |
Stopped |
|
Mx+B Scaling |
Instrument Preset State |
|
Gain Factor ("M") |
No Change |
|
Offset Factor ("B") |
No Change |
|
Scale Label |
No Change |
|
Alarm Limits |
Instrument Preset State |
|
Alarm Queue |
No Change |
|
Alarm State |
No Change |
|
HI and LO Alarm Limits |
No Change |
|
Alarm Output Configuration |
No Change |
|
Alarm Output State |
Output Lines are Cleared |
|
Alarm Output Slope |
No Change |
|
Module Hardware |
Instrument Preset State |
|
34901A, 34902A, 34908A |
All Channels Open |
|
34903A, 34904A |
All Channels Open |
|
34905A, 34906A |
Channels s11 and s21 Selected |
|
34907A |
Both DIO Ports = Input, Totalizer Count = 0, Both DACs = 0 VDC |
|
System-Related Operations |
Instrument Preset State |
|
Display State |
No Change |
|
Error Queue |
Errors Not Cleared |
|
Stored States |
No Change |