DISPlay:TEXT:CLEar

DISPlay:TEXT:CLEar

Syntax | Description | Parameters | Remarks | Return Format | Example

Syntax

DISPlay:TEXT:CLEar

Description

This command clears the text message displayed on the instrument's front-panel display (see DISPlay:TEXT command).

Remarks

• Clearing the text message does not override the display state (see DISPlay:STATe command); if the display was disabled prior to clearing the text message, the display will remain disabled.
• The front-panel display is automatically cleared when power is cycled, after a Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).

Example

The following command clears the text message on the front panel.

DISP:TEXT:CLEAR

See Also

DISPlay Subsystem Introduction

DISPlay

DISPlay:TEXT