Trimming and Adjusting the Angle of an Image
You can trim only the part of an image you need, or change the composition of an image where an image shot horizontally becomes vertical. You can also adjust the angle of an image before trimming. Note that when [Circle] is selected in [Aspect ratio], the area not selected is only filled in with black, and the image is not trimmed.
-
Select the image to be trimmed.
-
Open the trimming/angle adjustment window.
-
Click the [Trimming Angle] button.
-
The trimming/angle adjustment window appears.
-
Editing can be done once the image is displayed clearly in the trimming/angle adjustment window.
-
-
Adjust the angle of the image as needed.
-
Use the mouse (click
/
) to adjust the angle or directly enter the adjustment angle (0.01-degree increments; adjustable range: -45 to +45 degrees). -
If you click [Center on Screen], you can display the trimming range in the center of the window.
-
If you click the [OK] button after adjusting only the angle of the image, the image will be trimmed at the largest possible trimming range.
-
-
Select a ratio and drag the trimming range.
-
The trimming range can be moved by dragging.
-
You can enlarge or reduce the size of the trimming range by dragging the four corners of the trimming range. (Except when [Circle] is selected.)
-
-
Click the [OK] button to return to the main window.
-
The trimming range frame is displayed in the trimmed image.
-
When the trimmed image is displayed in an edit window or the edit image window, it is displayed in its trimmed form.
-
List of aspect ratios (width : height)
| [Free] | You can trim an image to any size, regardless of the selectable ratio. |
| [1:1] | 1:1 |
| [3:2] | 3:2 |
| [2:3] | 2:3 |
| [4:3] | 4:3 |
| [3:4] | 3:4 |
| [5:4] | 5:4 |
| [4:5] | 4:5 |
| [A Size Landscape] | A Size Landscape |
| [A Size Portrait] | A Size Portrait |
| [Letter Landscape] | Letter Landscape |
| [Letter Portrait] | Letter Portrait |
| [Custom] | You can trim an image at the specified ratio. |
| [Circle] | The area not selected is filled in with black. The image is not trimmed. |
- The trimmed range can be reverted to its original condition at any time
- A trimmed image is displayed or printed as a trimmed image. However, since the image is not actually trimmed, you can always revert to the original image by clicking the [Reset] button in the trimming/angle adjustment window or performing the "Re-Editing an Image" procedure.
- Display of the trimmed image in each window
-
Main window: The frame showing the trimming range is displayed on the image.
Edit window: The image is displayed in its trimmed condition.
Edit image window: The thumbnail image is the same as the main window display, and the enlarged image is the same as the edit window display. - Printing a trimmed image
- You can print as a trimmed image by printing it in DPP.
- The image becomes a trimmed image when saved as a separate image
- The trimmed JPEG or TIFF image actually becomes a trimmed image when saved as a separate image. (Saving as a Separate Image)
- Images that have aspect ratio set will be displayed as trimmed images
- When aspect ratio information is attached to a RAW image shot with some cameras, the set trimming range based on the aspect ratio information is displayed. Since the image is not actually trimmed, you can change the trimming range or revert to the condition before trimming. However, when a JPEG image is shot in a [4:3], [16:9] or [1:1] aspect ratio set with the EOS 5D Mark III, EOS 6D, EOS 70D, EOS 60D, EOS REBEL T5i/700D, EOS REBEL SL1/100D, EOS REBEL T4i/650D, EOS REBEL T3i/600D, EOS M2 or EOS M, its trimming range cannot be changed nor reverted to the condition before trimming, since the image is actually trimmed and saved in the set trimming ratio.* When reverting to the condition before trimming is performed based on the aspect ratio information at the time of shooting, click the [Reset] button. Also, if you want to cancel all the trimming range, click the [Clear] button.
*For JPEG images shot with EOS 5D Mark III and [Add cropping information] set in Custom Functions, aspect ratio information is only set and the image is not actually trimmed.
- Switch between screens using the keyboard
- You can also switch between full screen display/normal screen display by pressing the <Alt> + <Enter> keys or the <F11> key.
- Operate using the menu
- Each operation can also be performed with the menu which appears when you right-click with the mouse on the image.
- Apply the trimmed range to another image
- You can apply the trimmed range to another image by clicking the [Copy] button to copy the trimmed range, displaying another image and then clicking the [Paste] button. To batch apply a copied trimming range to multiple images, select the trimmed image and the multiple images to which you want to apply the trimmed range in the main window, and display the trimming/angle adjustment window. With the trimmed image displayed, click the [Copy] button and then click the [Apply All] button. This will apply the trimming range to all the images selected when the trimming/angle adjustment window is displayed.