Cinemachine
 | CinemachineComposer Fields |
The CinemachineComposer type exposes the following members.
Fields| Name | Description | |
|---|---|---|
 | m_BiasX | A non-zero bias will move the targt position away from the center of the soft zone |
| m_BiasY | A non-zero bias will move the targt position away from the center of the soft zone |
| m_DeadZoneHeight | Camera will not rotate vertically if the target is within this range of the position |
| m_DeadZoneWidth | Camera will not rotate horizontally if the target is within this range of the position |
| m_HorizontalDamping | How aggressively the camera tries to follow the target in the screen-horizontal direction.
Small numbers are more responsive, rapidly orienting the camera to keep the target in
the dead zone. Larger numbers give a more heavy slowly responding camera.
Using different vertical and horizontal settings can yield a wide range of camera behaviors. |
| m_LookaheadSmoothing | Controls the smoothness of the lookahead algorithm. Larger values smooth out
jittery predictions and also increase prediction lag |
| m_LookaheadTime | This setting will instruct the composer to adjust its target offset based
on the motion of the target. The composer will look at a point where it estimates
the target will be this many seconds into the future. Note that this setting is sensitive
to noisy animation, and can amplify the noise, resulting in undesirable camera jitter.
If the camera jitters unacceptably when the target is in motion, turn down this setting,
or animate the target more smoothly. |
| m_ScreenX | Horizontal screen position for target. The camera will rotate to the position the tracked object here |
| m_ScreenY | Vertical screen position for target, The camera will rotate to to position the tracked object here |
| m_SoftZoneHeight | When target is within this region, camera will gradually move to re-align
towards the desired position, depending onm the damping speed |
| m_SoftZoneWidth | When target is within this region, camera will gradually move to re-align
towards the desired position, depending onm the damping speed |
| m_TrackedObjectOffset | Target offset from the object's center in LOCAL space which
the Composer tracks. Use this to fine-tune the tracking target position
when the desired area is not in the tracked object's center |
| m_VerticalDamping | How aggressively the camera tries to follow the target in the screen-vertical direction.
Small numbers are more responsive, rapidly orienting the camera to keep the target in
the dead zone. Larger numbers give a more heavy slowly responding camera. Using different vertical
and horizontal settings can yield a wide range of camera behaviors. |
| OnGUICallback | Used by the Inspector Editor to display on-screen guides. |
See Also