To configure an Océ plotter driver (Procedure)

Configure Hewlett-Packard HP-GL/2 Devices

Configure Océ Plotters

Configure Xerox Devices

 

Set Device-Specific Configurations > Configure Océ Plotters > 

Configure Océ Plotters

Concept

Procedure

Quick Reference

To configure an Océ plotter driver

1. From the File menu, choose Plotter Manager.
2. Double-click the Add-a-Plotter Wizard shortcut icon.
3. On the Begin page, select My Computer if the plotter is connected to your computer. Select Network Plotter Server if the plotter is available through a network. Choose Next.
4. On the Network Plotter page, enter the UNC name of the networked plotter. Choose Next. This page is not displayed if you selected My Computer in step 3.
5. On the Plotter Model page under Manufacturers, select Océ. Under Model, select the type of Océ plotter that you are using. Choose Next.
6. On the Import PCP or PC2 page, select a PCP or PC2 file to import (optional). Choose Next.
7. On the Ports page, select the port that the printer is attached to. This page is not displayed if you selected Network Plotter Server in step 3. Choose Next.
8. On the Plotter Name page, enter a name for the plotter configuration file. Choose Next.
9. On the Finish page, choose Finish.

   A new plotter configuration file (PC3) is created.

 Command entry: PLOTTERMANAGER