| ADC Selection |
|
From the File menu, select Setup, then Converter.
You use this dialog box to select the type of oscilloscope and the port you have connected it to. If you are using an oscilloscope from the PicoScope 2000 or 3000 series, you do not need to specify the port.
ADC Type
A drop-down list of all the compatible oscilloscopes. PicoScope supports one oscilloscope at a time.
Printer port
(This option is enabled only for parallel-port oscilloscopes).
Select the physical port to which the oscilloscope will be connected from the drop down list (default LPT1 - parallel port):
One of the three standard printer ports: LPT1...LPT3
One of the four Pico USB parallel ports (USB-PP1...USB-PP4)
Note: On Windows NT/2000/XP computers, the LPT number may not be as expected. If LPT1 does not work, try LPT2 or 3.