2.1. Listing whole packages

The packages option tells the Distutils to process (build, distribute, install, etc.) all pure Python modules found in each package mentioned in the packages list. In order to do this, of course, there has to be a correspondence between package names and directories in the filesystem. The default correspondence is the most obvious one, i.e. package distutils is found in the directory distutils relative to the distribution root. Thus, when you say packages = ['foo'] in your setup script, you are promising that the Distutils will find a file foo/__init__.py (which might be spelled differently on your system, but you get the idea) relative to the directory where your setup script lives. If you break this promise, the Distutils will issue a warning but still process the broken package anyway.

If you use a different convention to lay out your source directory, that’s no problem: you just have to supply the package_dir option to tell the Distutils about your convention. For example, say you keep all Python source under lib, so that modules in the “root package” (i.e., not in any package at all) are in lib, modules in the foo package are in lib/foo, and so forth. Then you would put

package_dir = {'': 'lib'}

in your setup script. The keys to this dictionary are package names, and an empty package name stands for the root package. The values are directory names relative to your distribution root. In this case, when you say packages = ['foo'], you are promising that the file lib/foo/__init__.py exists.

Another possible convention is to put the foo package right in lib, the foo.bar package in lib/bar, etc. This would be written in the setup script as

package_dir = {'foo': 'lib'}

A package: dir entry in the package_dir dictionary implicitly applies to all packages below package, so the foo.bar case is automatically handled here. In this example, having packages = ['foo', 'foo.bar'] tells the Distutils to look for lib/__init__.py and lib/bar/__init__.py. (Keep in mind that although package_dir applies recursively, you must explicitly list all packages in packages: the Distutils will not recursively scan your source tree looking for any directory with an __init__.py file.)

2.2. Listing individual modules

For a small module distribution, you might prefer to list all modules rather than listing packages—especially the case of a single module that goes in the “root package” (i.e., no package at all). This simplest case was shown in section A Simple Example; here is a slightly more involved example:

py_modules = ['mod1', 'pkg.mod2']

This describes two modules, one of them in the “root” package, the other in the pkg package. Again, the default package/directory layout implies that these two modules can be found in mod1.py and pkg/mod2.py, and that pkg/__init__.py exists as well. And again, you can override the package/directory correspondence using the package_dir option.

2.3. Describing extension modules

Just as writing Python extension modules is a bit more complicated than writing pure Python modules, describing them to the Distutils is a bit more complicated. Unlike pure modules, it’s not enough just to list modules or packages and expect the Distutils to go out and find the right files; you have to specify the extension name, source file(s), and any compile/link requirements (include directories, libraries to link with, etc.).

All of this is done through another keyword argument to setup(), the ext_modules option. ext_modules is just a list of Extension instances, each of which describes a single extension module. Suppose your distribution includes a single extension, called foo and implemented by foo.c. If no additional instructions to the compiler/linker are needed, describing this extension is quite simple:

Extension('foo', ['foo.c'])

The Extension class can be imported from distutils.core along with setup(). Thus, the setup script for a module distribution that contains only this one extension and nothing else might be:

from distutils.core import setup, Extension
setup(name='foo',
      version='1.0',
      ext_modules=[Extension('foo', ['foo.c'])],
      )

The Extension class (actually, the underlying extension-building machinery implemented by the build_ext command) supports a great deal of flexibility in describing Python extensions, which is explained in the following sections.

Extension('foo', ['src/foo1.c', 'src/foo2.c'])

Extension('pkg.foo', ['src/foo1.c', 'src/foo2.c'])

setup(...,
      ext_package='pkg',
      ext_modules=[Extension('foo', ['foo.c']),
                   Extension('subpkg.bar', ['bar.c'])],
     )

setup(...,
      ext_modules=[Extension('_foo', ['foo.i'],
                             swig_opts=['-modern', '-I../include'])],
      py_modules=['foo'],
     )

> python setup.py build_ext --swig-opts="-modern -I../include"

Extension('foo', ['foo.c'], include_dirs=['include'])

Extension('foo', ['foo.c'], include_dirs=['/usr/include/X11'])

#include <X11/Xlib.h>

#include <Numerical/arrayobject.h>

from distutils.sysconfig import get_python_inc
incdir = os.path.join(get_python_inc(plat_specific=1), 'Numerical')
setup(...,
      Extension(..., include_dirs=[incdir]),
      )

Extension(...,
          define_macros=[('NDEBUG', '1'),
                         ('HAVE_STRFTIME', None)],
          undef_macros=['HAVE_FOO', 'HAVE_BAR'])

#define NDEBUG 1
#define HAVE_STRFTIME
#undef HAVE_FOO
#undef HAVE_BAR

Extension(...,
          libraries=['gdbm', 'readline'])

Extension(...,
          library_dirs=['/usr/X11R6/lib'],
          libraries=['X11', 'Xt'])

2.4. Relationships between Distributions and Packages

A distribution may relate to packages in three specific ways:

1. It can require packages or modules.
2. It can provide packages or modules.
3. It can obsolete packages or modules.

These relationships can be specified using keyword arguments to the distutils.core.setup() function.

Dependencies on other Python modules and packages can be specified by supplying the requires keyword argument to setup(). The value must be a list of strings. Each string specifies a package that is required, and optionally what versions are sufficient.

To specify that any version of a module or package is required, the string should consist entirely of the module or package name. Examples include 'mymodule' and 'xml.parsers.expat'.

If specific versions are required, a sequence of qualifiers can be supplied in parentheses. Each qualifier may consist of a comparison operator and a version number. The accepted comparison operators are:

<    >    ==
<=   >=   !=

These can be combined by using multiple qualifiers separated by commas (and optional whitespace). In this case, all of the qualifiers must be matched; a logical AND is used to combine the evaluations.

Let’s look at a bunch of examples:

Now that we can specify dependencies, we also need to be able to specify what we provide that other distributions can require. This is done using the provides keyword argument to setup(). The value for this keyword is a list of strings, each of which names a Python module or package, and optionally identifies the version. If the version is not specified, it is assumed to match that of the distribution.

Some examples:

A package can declare that it obsoletes other packages using the obsoletes keyword argument. The value for this is similar to that of the requires keyword: a list of strings giving module or package specifiers. Each specifier consists of a module or package name optionally followed by one or more version qualifiers. Version qualifiers are given in parentheses after the module or package name.

The versions identified by the qualifiers are those that are obsoleted by the distribution being described. If no qualifiers are given, all versions of the named module or package are understood to be obsoleted.

2.5. Installing Scripts

So far we have been dealing with pure and non-pure Python modules, which are usually not run by themselves but imported by scripts.

Scripts are files containing Python source code, intended to be started from the command line. Scripts don’t require Distutils to do anything very complicated. The only clever feature is that if the first line of the script starts with #! and contains the word “python”, the Distutils will adjust the first line to refer to the current interpreter location. By default, it is replaced with the current interpreter location. The --executable (or -e) option will allow the interpreter path to be explicitly overridden.

The scripts option simply is a list of files to be handled in this way. From the PyXML setup script:

setup(...,
      scripts=['scripts/xmlproc_parse', 'scripts/xmlproc_val']
      )

2.6. Installing Package Data

Often, additional files need to be installed into a package. These files are often data that’s closely related to the package’s implementation, or text files containing documentation that might be of interest to programmers using the package. These files are called package data.

Package data can be added to packages using the package_data keyword argument to the setup() function. The value must be a mapping from package name to a list of relative path names that should be copied into the package. The paths are interpreted as relative to the directory containing the package (information from the package_dir mapping is used if appropriate); that is, the files are expected to be part of the package in the source directories. They may contain glob patterns as well.

The path names may contain directory portions; any necessary directories will be created in the installation.

For example, if a package should contain a subdirectory with several data files, the files can be arranged like this in the source tree:

setup.py
src/
    mypkg/
        __init__.py
        module.py
        data/
            tables.dat
            spoons.dat
            forks.dat

The corresponding call to setup() might be:

setup(...,
      packages=['mypkg'],
      package_dir={'mypkg': 'src/mypkg'},
      package_data={'mypkg': ['data/*.dat']},
      )

2.7. Installing Additional Files

The data_files option can be used to specify additional files needed by the module distribution: configuration files, message catalogs, data files, anything which doesn’t fit in the previous categories.

data_files specifies a sequence of (directory, files) pairs in the following way:

setup(...,
      data_files=[('bitmaps', ['bm/b1.gif', 'bm/b2.gif']),
                  ('config', ['cfg/data.cfg']),
     )

Each (directory, files) pair in the sequence specifies the installation directory and the files to install there.

Each file name in files is interpreted relative to the setup.py script at the top of the package source distribution. Note that you can specify the directory where the data files will be installed, but you cannot rename the data files themselves.

The directory should be a relative path. It is interpreted relative to the installation prefix (Python’s sys.prefix for system installations; site.USER_BASE for user installations). Distutils allows directory to be an absolute installation path, but this is discouraged since it is incompatible with the wheel packaging format. No directory information from files is used to determine the final location of the installed file; only the name of the file is used.

You can specify the data_files options as a simple sequence of files without specifying a target directory, but this is not recommended, and the install command will print a warning in this case. To install data files directly in the target directory, an empty string should be given as the directory.

2.8. Additional meta-data

The setup script may include additional meta-data beyond the name and version. This information includes:

Notes:

1. These fields are required.
2. It is recommended that versions take the form major.minor[.patch[.sub]].
3. Either the author or the maintainer must be identified. If maintainer is provided, distutils lists it as the author in PKG-INFO.
4. The long_description field is used by PyPI when you are registering a package, to build its home page.
5. The license field is a text indicating the license covering the package where the license is not a selection from the “License” Trove classifiers. See the Classifier field. Notice that there’s a licence distribution option which is deprecated but still acts as an alias for license.
6. This field must be a list.
7. The valid classifiers are listed on PyPI.
8. To preserve backward compatibility, this field also accepts a string. If you pass a comma-separated string 'foo, bar', it will be converted to ['foo', 'bar'], Otherwise, it will be converted to a list of one string.

‘short string’

A single line of text, not more than 200 characters.

‘long string’

Multiple lines of plain text in reStructuredText format (see http://docutils.sourceforge.net/).

‘list of strings’

See below.

Encoding the version information is an art in itself. Python packages generally adhere to the version format major.minor[.patch][sub]. The major number is 0 for initial, experimental releases of software. It is incremented for releases that represent major milestones in a package. The minor number is incremented when important new features are added to the package. The patch number increments when bug-fix releases are made. Additional trailing version information is sometimes used to indicate sub-releases. These are “a1,a2,…,aN” (for alpha releases, where functionality and API may change), “b1,b2,…,bN” (for beta releases, which only fix bugs) and “pr1,pr2,…,prN” (for final pre-release release testing). Some examples:

0.1.0

the first, experimental release of a package

1.0.1a2

the second alpha release of the first patch version of 1.0

classifiers must be specified in a list:

setup(...,
      classifiers=[
          'Development Status :: 4 - Beta',
          'Environment :: Console',
          'Environment :: Web Environment',
          'Intended Audience :: End Users/Desktop',
          'Intended Audience :: Developers',
          'Intended Audience :: System Administrators',
          'License :: OSI Approved :: Python Software Foundation License',
          'Operating System :: MacOS :: MacOS X',
          'Operating System :: Microsoft :: Windows',
          'Operating System :: POSIX',
          'Programming Language :: Python',
          'Topic :: Communications :: Email',
          'Topic :: Office/Business',
          'Topic :: Software Development :: Bug Tracking',
          ],
      )

2.9. Debugging the setup script

Sometimes things go wrong, and the setup script doesn’t do what the developer wants.

Distutils catches any exceptions when running the setup script, and print a simple error message before the script is terminated. The motivation for this behaviour is to not confuse administrators who don’t know much about Python and are trying to install a package. If they get a big long traceback from deep inside the guts of Distutils, they may think the package or the Python installation is broken because they don’t read all the way down to the bottom and see that it’s a permission problem.

On the other hand, this doesn’t help the developer to find the cause of the failure. For this purpose, the DISTUTILS_DEBUG environment variable can be set to anything except an empty string, and distutils will now print detailed information about what it is doing, dump the full traceback when an exception occurs, and print the whole command line when an external program (like a C compiler) fails.