4.1.7 Confirm your Selected Options
The Upgrade Summary screens show you the parameters that will be used in the upgrade. These parameters are based on the current LANSA system that you are updating as well as options you have selected during this upgrade process.
The number of Summary screens and the information presented on them will depend on the options you have selected to be upgraded.
Check these summary screens carefully. If you do not wish to proceed with the parameters that will be used in this upgrade, you can change them by returning to either to the beginning or to Partition Initialization or you can cancel the upgrade process.
Use the and keys to scroll through the summary screens to view the parameters, options and components you have selected.
If you do not wish to submit the upgrade job, press to exit.
To return to a previous screen to make a change, press F11.
When you are satisfied that the parameters displayed on the update Summary screens are correct on the final summary screen, press to submit the batch job.
A list of software that has been updated is produced.
Leave the LANSA DVD or CD-ROM loaded until the batch job completes execution.
If there are any EPCs with the Install, they will be applied and the EPC log updated accordingly.
Go to 4.1.8 Verify the Upgrade.