Step 9. Add a Second LANSAWORK Routing Entry
Two routing table entries are required for the subsystem description.
To add an additional routing entry for the LANSAWORK subsystem description, use the ADDRTGE command again.
Press F4 to prompt the Add Routing Entry command.
Enter:
Library: |
QGPL |
Subsystem description: |
LANSAWORK - subsystem description as created in Step 3. Create LANSAWORK Subsystem Description. |
Routing entry sequence #: |
999 - required value |
Compare value: |
*ANY - required compare value |
Program to call: |
QCMD - system program to execute |
The command should appear as follows:
ADDRTGE SBSD(QGPL/LANSAWORK) SEQNBR(999) CMPVAL(*ANY) PGM(QCMD)