5.4.5 Nominate the File to work with
Whatever method you use to create your LANSA files, once they have been created or made known to LANSA, you will always follow the same steps to select the file you wish to do further work with.
Because these steps are always the same, they are not repeated throughout this chapter.
Wherever you need to specify the file to work with, you will work through the following screens. In this guide, these steps are referred to as "nominate the file you wish to work with".
Follow these steps to "nominate the file you wish to work with":
1. From the Main System menu, select the option.
|
Menu items 2 through to 5 will all request you to nominate the file you wish to work with. In this example, select the Review or change field definitions option and press Enter.
2. The with screen is displayed.
Note: The partition in which you are working will replace the ppp shown in this screen's identifier. For example, the demonstration partition would be DEMFILMENU.
|
3. Specify:
- the name of the file you wish to work with
- part of the name, to obtain a list of the files with names which generically match the characters entered
- leave the name blank, to obtain a list of all files.
If you did not specify an actual file name, the screen is returned with a list of files, as shown in this example with the partial file name DEM:
|
4. Roll up and down the list using your Up/Down arrow keys, if the list extends over one page.
You can change your selection to repeat the search, if required.
5. Select a file to work with by placing any character in the Sel column on the same line and pressing Enter.
Once you have nominated the file you wish to work with, the File Definition menu is displayed for you to choose which action you wish to take.