AcceptMutex Directive

The AcceptMutex directives sets the method that Apache uses to serialize multiple children accepting requests on network sockets. Prior to Apache 2.0, the method was selectable only at compile time. The optimal method to use is highly architecture and platform dependent. For further details, see the performance tuning documentation.

If this directive is set to Default, then the compile-time selected default will be used. Other possible methods are listed below. Note that not all methods are available on all platforms. If a method is specified which is not available, a message will be written to the error log listing the available methods.

flock

uses the flock(2) system call to lock the file defined by the LockFile directive.

fcntl

uses the fcntl(2) system call to lock the file defined by the LockFile directive.

posixsem

uses POSIX compatible semaphores to implement the mutex.

pthread

uses POSIX mutexes as implemented by the POSIX Threads (PThreads) specification.

sysvsem

uses SySV-style semaphores to implement the mutex.

If you want to find out the compile time chosen default for your system, you may set your LogLevel to debug. Then the default AcceptMutex will be written into the ErrorLog.

ChrootDir Directive

This directive tells the server to chroot(8) to the specified directory after startup, but before accepting requests.

Note that running the server under chroot is not simple, and requires additional setup, particularly if you are running scripts such as CGI or PHP. Please make sure you are properly familiar with the operation of chroot before attempting to use this feature.

CoreDumpDirectory Directive

This controls the directory to which Apache attempts to switch before dumping core. The default is in the ServerRoot directory, however since this should not be writable by the user the server runs as, core dumps won't normally get written. If you want a core dump for debugging, you can use this directive to place it in a different location.

EnableExceptionHook Directive

For safety reasons this directive is only available if the server was configured with the --enable-exception-hook option. It enables a hook that allows external modules to plug in and do something after a child crashed.

There are already two modules, mod_whatkilledus and mod_backtrace that make use of this hook. Please have a look at Jeff Trawick's EnableExceptionHook site for more information about these.

GracefulShutdownTimeout Directive

The GracefulShutdownTimeout specifies how many seconds after receiving a "graceful-stop" signal, a server should continue to run, handling the existing connections.

Setting this value to zero means that the server will wait indefinitely until all remaining requests have been fully served.

Group Directive

The Group directive sets the group under which the server will answer requests. In order to use this directive, the server must be run initially as root. If you start the server as a non-root user, it will fail to change to the specified group, and will instead continue to run as the group of the original user. Unix-group is one of:

A group name

Refers to the given group by name.

# followed by a group number.

Refers to a group by its number.

It is recommended that you set up a new group specifically for running the server. Some admins use user nobody, but this is not always possible or desirable.

Special note: Use of this directive in <VirtualHost> is no longer supported. To configure your server for suexec use SuexecUserGroup.

Listen Directive

The Listen directive instructs Apache to listen to only specific IP addresses or ports; by default it responds to requests on all IP interfaces. Listen is now a required directive. If it is not in the config file, the server will fail to start. This is a change from previous versions of Apache.

The Listen directive tells the server to accept incoming requests on the specified port or address-and-port combination. If only a port number is specified, the server listens to the given port on all interfaces. If an IP address is given as well as a port, the server will listen on the given port and interface.

Multiple Listen directives may be used to specify a number of addresses and ports to listen to. The server will respond to requests from any of the listed addresses and ports.

For example, to make the server accept connections on both port 80 and port 8000, use:

To make the server accept connections on two specified interfaces and port numbers, use

IPv6 addresses must be surrounded in square brackets, as in the following example:

The optional protocol argument is not required for most configurations. If not specified, https is the default for port 443 and http the default for all other ports. The protocol is used to determine which module should handle a request, and to apply protocol specific optimizations with the AcceptFilter directive.

You only need to set the protocol if you are running on non-standard ports. For example, running an https site on port 8443:

See also

• DNS Issues
• Setting which addresses and ports Apache uses

ListenBackLog Directive

The maximum length of the queue of pending connections. Generally no tuning is needed or desired, however on some systems it is desirable to increase this when under a TCP SYN flood attack. See the backlog parameter to the listen(2) system call.

This will often be limited to a smaller number by the operating system. This varies from OS to OS. Also note that many OSes do not use exactly what is specified as the backlog, but use a number based on (but normally larger than) what is set.

LockFile Directive

The LockFile directive sets the path to the lockfile used when Apache is used with an AcceptMutex value of either fcntl or flock. This directive should normally be left at its default value. The main reason for changing it is if the logs directory is NFS mounted, since the lockfile must be stored on a local disk. The PID of the main server process is automatically appended to the filename.

See also

• AcceptMutex

MaxClients Directive

The MaxClients directive sets the limit on the number of simultaneous requests that will be served. Any connection attempts over the MaxClients limit will normally be queued, up to a number based on the ListenBacklog directive. Once a child process is freed at the end of a different request, the connection will then be serviced.

For non-threaded servers (i.e., prefork), MaxClients translates into the maximum number of child processes that will be launched to serve requests. The default value is 256; to increase it, you must also raise ServerLimit.

For threaded and hybrid servers (e.g. beos or worker) MaxClients restricts the total number of threads that will be available to serve clients. The default value for beos is 50. For hybrid MPMs the default value is 16 (ServerLimit) multiplied by the value of 25 (ThreadsPerChild). Therefore, to increase MaxClients to a value that requires more than 16 processes, you must also raise ServerLimit.

MaxMemFree Directive

The MaxMemFree directive sets the maximum number of free Kbytes that the main allocator is allowed to hold without calling free(). When not set, or when set to zero, the threshold will be set to unlimited.

MaxRequestsPerChild Directive

The MaxRequestsPerChild directive sets the limit on the number of requests that an individual child server process will handle. After MaxRequestsPerChild requests, the child process will die. If MaxRequestsPerChild is 0, then the process will never expire.

Setting MaxRequestsPerChild to a non-zero value limits the amount of memory that process can consume by (accidental) memory leakage.

MaxSpareThreads Directive

Maximum number of idle threads. Different MPMs deal with this directive differently.

For worker, the default is MaxSpareThreads 250. These MPMs deal with idle threads on a server-wide basis. If there are too many idle threads in the server then child processes are killed until the number of idle threads is less than this number.

For mpm_netware the default is MaxSpareThreads 100. Since this MPM runs a single-process, the spare thread count is also server-wide.

beos and mpmt_os2 work similar to mpm_netware. The default for beos is MaxSpareThreads 50. For mpmt_os2 the default value is 10.

See also

• MinSpareThreads
• StartServers

MinSpareThreads Directive

Minimum number of idle threads to handle request spikes. Different MPMs deal with this directive differently.

worker uses a default of MinSpareThreads 75 and deal with idle threads on a server-wide basis. If there aren't enough idle threads in the server then child processes are created until the number of idle threads is greater than number.

mpm_netware uses a default of MinSpareThreads 10 and, since it is a single-process MPM, tracks this on a server-wide bases.

beos and mpmt_os2 work similar to mpm_netware. The default for beos is MinSpareThreads 1. For mpmt_os2 the default value is 5.

See also

• MaxSpareThreads
• StartServers

PidFile Directive

The PidFile directive sets the file to which the server records the process id of the daemon. If the filename is not absolute then it is assumed to be relative to the ServerRoot.

It is often useful to be able to send the server a signal, so that it closes and then re-opens its ErrorLog and TransferLog, and re-reads its configuration files. This is done by sending a SIGHUP (kill -1) signal to the process id listed in the PidFile.

The PidFile is subject to the same warnings about log file placement and security.

ReceiveBufferSize Directive

The server will set the TCP receive buffer size to the number of bytes specified.

If set to the value of 0, the server will use the OS default.

ScoreBoardFile Directive

Apache uses a scoreboard to communicate between its parent and child processes. Some architectures require a file to facilitate this communication. If the file is left unspecified, Apache first attempts to create the scoreboard entirely in memory (using anonymous shared memory) and, failing that, will attempt to create the file on disk (using file-based shared memory). Specifying this directive causes Apache to always create the file on the disk.

File-based shared memory is useful for third-party applications that require direct access to the scoreboard.

If you use a ScoreBoardFile then you may see improved speed by placing it on a RAM disk. But be careful that you heed the same warnings about log file placement and security.

See also

• Stopping and Restarting Apache

SendBufferSize Directive

The server will set the TCP send buffer size to the number of bytes specified. Very useful to increase past standard OS defaults on high speed high latency (i.e., 100ms or so, such as transcontinental fast pipes).

If set to the value of 0, the server will use the OS default.

Further configuration of your operating system may be required to elicit better performance on high speed, high latency connections.

ServerLimit Directive

For the prefork MPM, this directive sets the maximum configured value for MaxClients for the lifetime of the Apache process. For the worker MPM, this directive in combination with ThreadLimit sets the maximum configured value for MaxClients for the lifetime of the Apache process. Any attempts to change this directive during a restart will be ignored, but MaxClients can be modified during a restart.

Special care must be taken when using this directive. If ServerLimit is set to a value much higher than necessary, extra, unused shared memory will be allocated. If both ServerLimit and MaxClients are set to values higher than the system can handle, Apache may not start or the system may become unstable.

With the prefork MPM, use this directive only if you need to set MaxClients higher than 256 (default). Do not set the value of this directive any higher than what you might want to set MaxClients to.

With worker use this directive only if your MaxClients and ThreadsPerChild settings require more than 16 server processes (default). Do not set the value of this directive any higher than the number of server processes required by what you may want for MaxClients and ThreadsPerChild.

See also

• Stopping and Restarting Apache

StartServers Directive

The StartServers directive sets the number of child server processes created on startup. As the number of processes is dynamically controlled depending on the load, there is usually little reason to adjust this parameter.

The default value differs from MPM to MPM. For worker the default is StartServers 3. For prefork defaults to 5 and for mpmt_os2 to 2.

StartThreads Directive

Number of threads created on startup. As the number of threads is dynamically controlled depending on the load, there is usually little reason to adjust this parameter.

For mpm_netware the default is StartThreads 50 and, since there is only a single process, this is the total number of threads created at startup to serve requests.

For beos the default is StartThreads 10. It also reflects the total number of threads created at startup to serve requests.

ThreadLimit Directive

This directive sets the maximum configured value for ThreadsPerChild for the lifetime of the Apache process. Any attempts to change this directive during a restart will be ignored, but ThreadsPerChild can be modified during a restart up to the value of this directive.

Special care must be taken when using this directive. If ThreadLimit is set to a value much higher than ThreadsPerChild, extra unused shared memory will be allocated. If both ThreadLimit and ThreadsPerChild are set to values higher than the system can handle, Apache may not start or the system may become unstable. Do not set the value of this directive any higher than your greatest predicted setting of ThreadsPerChild for the current run of Apache.

The default value for ThreadLimit is 1920 when used with mpm_winnt and 64 when used with the others.

ThreadsPerChild Directive

This directive sets the number of threads created by each child process. The child creates these threads at startup and never creates more. If using an MPM like mpm_winnt, where there is only one child process, this number should be high enough to handle the entire load of the server. If using an MPM like worker, where there are multiple child processes, the total number of threads should be high enough to handle the common load on the server.

The default value for ThreadsPerChild is 64 when used with mpm_winnt and 25 when used with the others.

ThreadStackSize Directive

The ThreadStackSize directive sets the size of the stack (for autodata) of threads which handle client connections and call modules to help process those connections. In most cases the operating system default for stack size is reasonable, but there are some conditions where it may need to be adjusted:

• On platforms with a relatively small default thread stack size (e.g., HP-UX), Apache may crash when using some third-party modules which use a relatively large amount of autodata storage. Those same modules may have worked fine on other platforms where the default thread stack size is larger. This type of crash is resolved by setting ThreadStackSize to a value higher than the operating system default. This type of adjustment is necessary only if the provider of the third-party module specifies that it is required, or if diagnosis of an Apache crash indicates that the thread stack size was too small.
• On platforms where the default thread stack size is significantly larger than necessary for the web server configuration, a higher number of threads per child process will be achievable if ThreadStackSize is set to a value lower than the operating system default. This type of adjustment should only be made in a test environment which allows the full set of web server processing can be exercised, as there may be infrequent requests which require more stack to process. The minimum required stack size strongly depends on the modules used, but any change in the web server configuration can invalidate the current ThreadStackSize setting.

User Directive

The User directive sets the user ID as which the server will answer requests. In order to use this directive, the server must be run initially as root. If you start the server as a non-root user, it will fail to change to the lesser privileged user, and will instead continue to run as that original user. If you do start the server as root, then it is normal for the parent process to remain running as root. Unix-userid is one of:

A username

Refers to the given user by name.

# followed by a user number.

Refers to a user by its number.

The user should have no privileges that result in it being able to access files that are not intended to be visible to the outside world, and similarly, the user should not be able to execute code that is not meant for HTTP requests. It is recommended that you set up a new user and group specifically for running the server. Some admins use user nobody, but this is not always desirable, since the nobody user can have other uses on the system.

Special note: Use of this directive in <VirtualHost> is no longer supported. To configure your server for suexec use SuexecUserGroup.