AngularDisplayFormat Property |
Specifies the unit used when angular measurements are displayed.
See Also | Example
Signature
object.AngularDisplayFormat
object
AecBaseDatabasePreferences The object this property applies to.
AngularDisplayFormat
Long; read-write
0: |
Use Degrees |
1: |
Use Degrees/Minutes/Seconds |
2: |
Use Grads |
3: |
Use Radians |
4: |
Use Surveyor |
Remarks
When you type degrees at AutoCAD command prompts, type them in the decimal format indicated (DD.MMSS). Use a period (.) between the degree value and the minutes and seconds. For example, to enter 67°45’15" type the value as 67.4515. If you use bearings, then type the bearing quadrant first, and then the angle in degrees.