Choosing a video and audio capture device
This page of the Video Capture Wizard lets you choose the video and audio devices you want to use for capturing video and audio.
The following options appear on this page.
Available devices
Lists the available capture devices you can use for capturing video. If you only have one video capture device attached to your computer, that device is the only one listed.
For many video capture devices, the name of the device is listed according to the hardware manufacturer’s name and device name. For example, when capturing video from an analog camera attached to an analog capture card on your computer, you would choose the analog capture card as the capture device for this option.
Video input source
Lists the available input connection lines based on the number of lines available for the selected video capture device For example, if an analog capture device has multiple input connections, such as an S-video connection and a composite video connection, you need to choose which input connection line to use for capturing video. If only one input line can be used for capturing by the device, that line is selected and this option does not appear.
This option is not available for a DV camera connected to an IEEE 1394 port.
Configure
Click to change the configuration of the selected video capture device. The resulting dialog box depends on the specific capture device you are using. For more information about the options available in the resulting Configure Video Capture Device dialog box, see Understanding the Configure Video Capture Device dialog box.
This option is not available for a DV camera connected to an IEEE 1394 port.
Audio device
Lists the available audio capture devices you can use for capturing audio. If you have only one audio capture device, such as your default sound card, that device is selected automatically.
This option is available only for analog devices.
Audio input source
Lists the available connection input lines based on the number of input connections available for the selected audio device. For example, if you have a microphone attached to the microphone line input of your computer, you would choose Microphone as the audio input source.
This option is available only for analog devices with multiple line inputs.
Input level
Adjusts the volume of the captured audio.
When choosing the capturing level, select an input level toward the upper part of the meter without entering the red-colored area, which is marked by the second line from the top. If the capturing level is set too low, the captured audio may be too low to be heard. Conversely, if the capturing level is set too high, the captured audio may be too loud and distorted.
For some devices, such as a DV camera connected to an IEEE 1394 port, the capturing volume cannot be adjusted by dragging the audio level slider.
Note
- This page of the Video Capture Wizard does not appear when a single DV device connected to an IEEE 1394 port is the only video capture device found on the computer.
Related topics
© 2000-2002 Microsoft Corporation. All rights reserved.