Example Protocols

WinWCP

Recording Experimental Signals > Creating Stimulus Protocols > Example Protocols

A number of example protocols are installed in the vprot folder with WinWCP.

VSteps 10-100mV 100ms.xml

A family of 10 depolarising, 100 msec duration, voltage steps, ranging from 10 mV to 100 mV.

ISteps 10-100pA 100ms.xml

A family of 10 depolarising, 100 msec duration, current steps, ranging from 10 pA to 100 pA.

tail current.xml

A two step pulse protocol for recording tail currents. A 500 msec pre-pulse, followed by a 60 mV, 50 msec duration test pulse. The pre-pulse steps from 10mV to 120 mV.

Ramp -100..100mV 1s.xml

A voltage ramp, slewing from –100 mV to +100 mV over a period of 1 sec.

sinewave.xml

A digitised 1572 sample point sine waveform .

Digpulse.xml

A digital stimulus program controlling digital outputs 0 and 1. Dig.0 is OFF initially and pulses ON for a period of 50 msec, after a delay of 100 msec. Dig. 0 is ON initially and pulses OFF for 50 msec.

 

Next