STM32F769I-Discovery BSP User Manual: stm32f769i_discovery_qspi.c File Reference

STM32F769I-Discovery BSP Drivers

stm32f769i_discovery_qspi.c File Reference

This file includes a standard driver for the MX25L512 QSPI memory mounted on STM32F769I-Discovery board. More...

Go to the source code of this file.

Functions

static uint8_t QSPI_ResetMemory (QSPI_HandleTypeDef *hqspi)
 This function reset the QSPI memory.
static uint8_t QSPI_EnterFourBytesAddress (QSPI_HandleTypeDef *hqspi)
 This function set the QSPI memory in 4-byte address mode.
static uint8_t QSPI_DummyCyclesCfg (QSPI_HandleTypeDef *hqspi)
 This function configure the dummy cycles on memory side.
static uint8_t QSPI_EnterMemory_QPI (QSPI_HandleTypeDef *hqspi)
 This function put QSPI memory in QPI mode (quad I/O).
static uint8_t QSPI_ExitMemory_QPI (QSPI_HandleTypeDef *hqspi)
 This function put QSPI memory in SPI mode.
static uint8_t QSPI_OutDrvStrengthCfg (QSPI_HandleTypeDef *hqspi)
 This function configure the Output driver strength on memory side.
static uint8_t QSPI_WriteEnable (QSPI_HandleTypeDef *hqspi)
 This function send a Write Enable and wait it is effective.
static uint8_t QSPI_AutoPollingMemReady (QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
 This function read the SR of the memory and wait the EOP.
uint8_t BSP_QSPI_Init (void)
 Initializes the QSPI interface.
uint8_t BSP_QSPI_DeInit (void)
 De-Initializes the QSPI interface.
uint8_t BSP_QSPI_Read (uint8_t *pData, uint32_t ReadAddr, uint32_t Size)
 Reads an amount of data from the QSPI memory.
uint8_t BSP_QSPI_Write (uint8_t *pData, uint32_t WriteAddr, uint32_t Size)
 Writes an amount of data to the QSPI memory.
uint8_t BSP_QSPI_Erase_Block (uint32_t BlockAddress)
 Erases the specified block of the QSPI memory.
uint8_t BSP_QSPI_Erase_Chip (void)
 Erases the entire QSPI memory.
uint8_t BSP_QSPI_GetStatus (void)
 Reads current status of the QSPI memory.
uint8_t BSP_QSPI_GetInfo (QSPI_Info *pInfo)
 Return the configuration of the QSPI memory.
uint8_t BSP_QSPI_EnableMemoryMappedMode (void)
 Configure the QSPI in memory-mapped mode.
__weak void BSP_QSPI_MspInit (QSPI_HandleTypeDef *hqspi, void *Params)
 QSPI MSP Initialization This function configures the hardware resources used in this example:
__weak void BSP_QSPI_MspDeInit (QSPI_HandleTypeDef *hqspi, void *Params)
 QSPI MSP De-Initialization This function frees the hardware resources used in this example:

Variables

QSPI_HandleTypeDef QSPIHandle

Detailed Description

This file includes a standard driver for the MX25L512 QSPI memory mounted on STM32F769I-Discovery board.

Author:
MCD Application Team
Version:
V2.0.0
Date:
30-December-2016
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================  
  [..] 
   (#) This driver is used to drive the MX25L512 QSPI external
       memory mounted on STM32F769I-Discovery board.
       
   (#) This driver need a specific component driver (MX25L51245G) to be included with.

   (#) Initialization steps:
       (++) Initialize the QPSI external memory using the BSP_QSPI_Init() function. This 
            function includes the MSP layer hardware resources initialization and the
            QSPI interface with the external memory.
  
   (#) QSPI memory operations
       (++) QSPI memory can be accessed with read/write operations once it is
            initialized.
            Read/write operation can be performed with AHB access using the functions
            BSP_QSPI_Read()/BSP_QSPI_Write(). 
       (++) The function BSP_QSPI_GetInfo() returns the configuration of the QSPI memory. 
            (see the QSPI memory data sheet)
       (++) Perform erase block operation using the function BSP_QSPI_Erase_Block() and by
            specifying the block address. You can perform an erase operation of the whole 
            chip by calling the function BSP_QSPI_Erase_Chip(). 
       (++) The function BSP_QSPI_GetStatus() returns the current status of the QSPI memory. 
            (see the QSPI memory data sheet)
  
Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f769i_discovery_qspi.c.

Generated on Fri Dec 30 2016 18:30:07 for STM32F769I-Discovery BSP User Manual by   doxygen 1.7.6.1