STM32446E_EVAL BSP User Manual: stm32446e_eval_eeprom.h File Reference

STM32446E EVAL BSP Drivers

stm32446e_eval_eeprom.h File Reference

This file contains all the functions prototypes for the stm32446e_eval_eeprom.c firmware driver. More...

#include "stm32446e_eval.h"

Go to the source code of this file.

Defines

#define EEPROM_PAGESIZE   ((uint8_t)4)
#define EEPROM_MAX_SIZE   ((uint16_t)0x2000) /* 64Kbit */
#define EEPROM_MAX_TRIALS   ((uint32_t)3000)
#define EEPROM_OK   ((uint32_t)0)
#define EEPROM_FAIL   ((uint32_t)1)
#define EEPROM_TIMEOUT   ((uint32_t)2)

Functions

uint32_t BSP_EEPROM_Init (void)
 Initializes peripherals used by the I2C EEPROM driver.
uint8_t BSP_EEPROM_DeInit (void)
 DeInitializes the EEPROM.
uint32_t BSP_EEPROM_ReadBuffer (uint8_t *pBuffer, uint16_t ReadAddr, uint16_t *NumByteToRead)
 Reads a block of data from the EEPROM.
uint32_t BSP_EEPROM_WritePage (uint8_t *pBuffer, uint16_t WriteAddr, uint8_t *NumByteToWrite)
 Writes more than one byte to the EEPROM with a single WRITE cycle.
uint32_t BSP_EEPROM_WriteBuffer (uint8_t *pBuffer, uint16_t WriteAddr, uint16_t NumByteToWrite)
 Writes buffer of data to the I2C EEPROM.
uint32_t BSP_EEPROM_WaitEepromStandbyState (void)
 Wait for EEPROM Standby state.
void BSP_EEPROM_TIMEOUT_UserCallback (void)
 Basic management of the timeout situation.
void EEPROM_IO_Init (void)
 Initializes peripherals used by the I2C EEPROM driver.
HAL_StatusTypeDef EEPROM_IO_WriteData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
 Write data to I2C EEPROM driver in using DMA channel.
HAL_StatusTypeDef EEPROM_IO_ReadData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
 Read data from I2C EEPROM driver in using DMA channel.
HAL_StatusTypeDef EEPROM_IO_IsDeviceReady (uint16_t DevAddress, uint32_t Trials)
 Checks if target device is ready for communication.

Detailed Description

This file contains all the functions prototypes for the stm32446e_eval_eeprom.c firmware driver.

Author:
MCD Application Team
Version:
V1.1.1
Date:
13-January-2016
Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32446e_eval_eeprom.h.

Generated on Fri Jan 15 2016 10:06:21 for STM32446E_EVAL BSP User Manual by   doxygen 1.7.6.1