stm32373c_eval.h File Reference

This file contains definitions for STM32373C_EVAL's Leds, push-buttons and COM port hardware resources. More...

#include "stm32f3xx_hal.h"

Go to the source code of this file.

Defines
#define	LEDn   4
#define	LED1_PIN   GPIO_PIN_0
#define	LED1_GPIO_PORT   GPIOC
#define	LED1_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED1_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LED2_PIN   GPIO_PIN_1
#define	LED2_GPIO_PORT   GPIOC
#define	LED2_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED2_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LED3_PIN   GPIO_PIN_2
#define	LED3_GPIO_PORT   GPIOC
#define	LED3_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED3_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LED4_PIN   GPIO_PIN_3
#define	LED4_GPIO_PORT   GPIOC
#define	LED4_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	LED4_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	LEDx_GPIO_CLK_ENABLE(__LED__)
#define	LEDx_GPIO_CLK_DISABLE(__LED__)
#define	JOYn   5
#define	BUTTONn   2 + JOYn
#define	TAMPER_BUTTON_PIN   GPIO_PIN_0
	Tamper push-button.
#define	TAMPER_BUTTON_GPIO_PORT   GPIOA
#define	TAMPER_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	TAMPER_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	TAMPER_BUTTON_EXTI_IRQn   EXTI0_IRQn
#define	KEY_BUTTON_PIN   GPIO_PIN_2
	Key push-button.
#define	KEY_BUTTON_GPIO_PORT   GPIOA
#define	KEY_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	KEY_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	KEY_BUTTON_EXTI_IRQn   EXTI2_TSC_IRQn
#define	RIGHT_JOY_PIN   GPIO_PIN_9
	Joystick Right push-button.
#define	RIGHT_JOY_GPIO_PORT   GPIOF
#define	RIGHT_JOY_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOF_CLK_ENABLE()
#define	RIGHT_JOY_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOF_CLK_DISABLE()
#define	RIGHT_JOY_EXTI_IRQn   EXTI9_5_IRQn
#define	LEFT_JOY_PIN   GPIO_PIN_4
	Joystick Left push-button.
#define	LEFT_JOY_GPIO_PORT   GPIOF
#define	LEFT_JOY_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOF_CLK_ENABLE()
#define	LEFT_JOY_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOF_CLK_DISABLE()
#define	LEFT_JOY_EXTI_IRQn   EXTI4_IRQn
#define	UP_JOY_PIN   GPIO_PIN_10
	Joystick Up push-button.
#define	UP_JOY_GPIO_PORT   GPIOF
#define	UP_JOY_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOF_CLK_ENABLE()
#define	UP_JOY_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOF_CLK_DISABLE()
#define	UP_JOY_EXTI_IRQn   EXTI15_10_IRQn
#define	DOWN_JOY_PIN   GPIO_PIN_2
	Joystick Down push-button.
#define	DOWN_JOY_GPIO_PORT   GPIOF
#define	DOWN_JOY_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOF_CLK_ENABLE()
#define	DOWN_JOY_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOF_CLK_DISABLE()
#define	DOWN_JOY_EXTI_IRQn   EXTI2_TSC_IRQn
#define	SEL_JOY_PIN   GPIO_PIN_6
	Joystick Sel push-button.
#define	SEL_JOY_GPIO_PORT   GPIOE
#define	SEL_JOY_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
#define	SEL_JOY_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
#define	SEL_JOY_EXTI_IRQn   EXTI9_5_IRQn
#define	BUTTONx_GPIO_CLK_ENABLE(__BUTTON__)
#define	BUTTONx_GPIO_CLK_DISABLE(__BUTTON__)
#define	JOYx_GPIO_CLK_ENABLE(__JOY__)
#define	JOYx_GPIO_CLK_DISABLE(__JOY__)
#define	COMn   1
#define	EVAL_COM1   USART2
	Definition for COM port1, connected to USART2.
#define	EVAL_COM1_CLK_ENABLE()   __HAL_RCC_USART2_CLK_ENABLE()
#define	EVAL_COM1_CLK_DISABLE()   __HAL_RCC_USART2_CLK_DISABLE()
#define	EVAL_COM1_TX_PIN   GPIO_PIN_5
#define	EVAL_COM1_TX_GPIO_PORT   GPIOD
#define	EVAL_COM1_TX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	EVAL_COM1_TX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	EVAL_COM1_TX_AF   GPIO_AF7_USART2
#define	EVAL_COM1_RX_PIN   GPIO_PIN_6
#define	EVAL_COM1_RX_GPIO_PORT   GPIOD
#define	EVAL_COM1_RX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	EVAL_COM1_RX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	EVAL_COM1_RX_AF   GPIO_AF7_USART2
#define	EVAL_COM1_CTS_PIN   GPIO_PIN_3
#define	EVAL_COM1_CTS_GPIO_PORT   GPIOD
#define	EVAL_COM1_CTS_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	EVAL_COM1_CTS_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	EVAL_COM1_CTS_AF   GPIO_AF7_USART2
#define	EVAL_COM1_RTS_PIN   GPIO_PIN_4
#define	EVAL_COM1_RTS_GPIO_PORT   GPIOD
#define	EVAL_COM1_RTS_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	EVAL_COM1_RTS_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	EVAL_COM1_RTS_AF   GPIO_AF7_USART2
#define	EVAL_COM1_IRQn   USART2_IRQn
#define	COMx_CLK_ENABLE(__COM__)   do { if ((__COM__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0)
#define	COMx_CLK_DISABLE(__COM__)   (((__COM__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0)
#define	COMx_TX_GPIO_CLK_ENABLE(__COM__)   do { if ((__COM__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0)
#define	COMx_TX_GPIO_CLK_DISABLE(__COM__)   (((__COM__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define	COMx_RX_GPIO_CLK_ENABLE(__COM__)   do { if ((__COM__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0)
#define	COMx_RX_GPIO_CLK_DISABLE(__COM__)   (((__COM__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0)
#define	COMx_CTS_GPIO_CLK_ENABLE(__COM__)   do { if ((__COM__) == COM1) EVAL_COM1_CTS_GPIO_CLK_ENABLE();} while(0)
#define	COMx_CTS_GPIO_CLK_DISABLE(__COM__)   (((__COM__) == COM1) ? EVAL_COM1_CTS_GPIO_CLK_DISABLE() : 0)
#define	COMx_RTS_GPIO_CLK_ENABLE(__COM__)   do { if ((__COM__) == COM1) EVAL_COM1_RTS_GPIO_CLK_ENABLE();} while(0)
#define	COMx_RTS_GPIO_CLK_DISABLE(__COM__)   (((__COM__) == COM1) ? EVAL_COM1_RTS_GPIO_CLK_DISABLE() : 0)
#define	EVAL_I2C2   I2C2
	Definition for I2C Interface pins (I2C2 used)
#define	EVAL_I2C2_CLK_ENABLE()   __HAL_RCC_I2C2_CLK_ENABLE()
#define	EVAL_I2C2_CLK_DISABLE()   __HAL_RCC_I2C2_CLK_DISABLE()
#define	EVAL_I2C2_FORCE_RESET()   __HAL_RCC_I2C2_FORCE_RESET()
#define	EVAL_I2C2_RELEASE_RESET()   __HAL_RCC_I2C2_RELEASE_RESET()
#define	EVAL_I2C2_SCL_PIN   GPIO_PIN_9 /* PA.09 */
#define	EVAL_I2C2_SDA_PIN   GPIO_PIN_10 /* PA.10 */
#define	EVAL_I2C2_SMBUS_PIN   GPIO_PIN_8 /* PA.08 */
#define	EVAL_I2C2_GPIO_PORT   GPIOA /* GPIOA */
#define	EVAL_I2C2_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	EVAL_I2C2_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	EVAL_I2C2_AF   GPIO_AF4_I2C2
#define	EVAL_I2C1   I2C1
	Definition for I2C Interface pins (I2C1 used)
#define	EVAL_I2C1_CLK_ENABLE()   __HAL_RCC_I2C1_CLK_ENABLE()
#define	EVAL_I2C1_CLK_DISABLE()   __HAL_RCC_I2C1_CLK_DISABLE()
#define	EVAL_I2C1_FORCE_RESET()   __HAL_RCC_I2C1_FORCE_RESET()
#define	EVAL_I2C1_RELEASE_RESET()   __HAL_RCC_I2C1_RELEASE_RESET()
#define	EVAL_I2C1_SCL_PIN   GPIO_PIN_6 /* PB.6 */
#define	EVAL_I2C1_SDA_PIN   GPIO_PIN_7 /* PB.7 */
#define	EVAL_I2C1_GPIO_PORT   GPIOB /* GPIOB */
#define	EVAL_I2C1_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
#define	EVAL_I2C1_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOB_CLK_DISABLE()
#define	EVAL_I2C1_AF   GPIO_AF4_I2C1
#define	I2C2_TIMING   0xC062121F
#define	I2C1_TIMING   0xC062121F
#define	EVAL_I2C2_TIMEOUT_MAX   1000
#define	EVAL_I2C1_TIMEOUT_MAX   1000
#define	EVAL_SPIx   SPI3
	Definition for SPI Interface pins (SPI3 used)
#define	EVAL_SPIx_CLK_ENABLE()   __HAL_RCC_SPI3_CLK_ENABLE()
#define	EVAL_SPIx_CLK_DISABLE()   __HAL_RCC_SPI3_CLK_DISABLE()
#define	EVAL_SPIx_FORCE_RESET()   __HAL_RCC_SPI3_FORCE_RESET()
#define	EVAL_SPIx_RELEASE_RESET()   __HAL_RCC_SPI3_RELEASE_RESET()
#define	EVAL_SPIx_SCK_PIN   GPIO_PIN_10 /* PC.10 */
#define	EVAL_SPIx_MISO_PIN   GPIO_PIN_11 /* PC.11 */
#define	EVAL_SPIx_MOSI_PIN   GPIO_PIN_12 /* PC.12 */
#define	EVAL_SPIx_GPIO_PORT   GPIOC /* GPIOC */
#define	EVAL_SPIx_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
#define	EVAL_SPIx_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOC_CLK_DISABLE()
#define	EVAL_SPIx_AF   GPIO_AF6_SPI3
#define	EVAL_SPIx_TIMEOUT_MAX   1000
#define	LCD_CS_LOW()   HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET)
#define	LCD_CS_HIGH()   HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET)
#define	LCD_NCS_PIN   GPIO_PIN_2 /* PD.02 */
	LCD Control Interface pins.
#define	LCD_NCS_GPIO_PORT   GPIOD
#define	LCD_NCS_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	LCD_NCS_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	SD_CS_LOW()   HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
#define	SD_CS_HIGH()   HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
#define	SD_CS_PIN   GPIO_PIN_2 /* PE.02 */
	SD card Control pins.
#define	SD_CS_GPIO_PORT   GPIOE /* GPIOE */
#define	SD_CS_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
#define	SD_CS_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
#define	SD_DETECT_PIN   GPIO_PIN_3 /* PE.03 */
	SD Detect Interface pins.
#define	SD_DETECT_GPIO_PORT   GPIOE /* GPIOE */
#define	SD_DETECT_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
#define	SD_DETECT_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
#define	SD_DETECT_EXTI_IRQn   EXTI3_IRQn
#define	AUDIO_RESET_PIN   GPIO_PIN_11
	I2C AUDIO Interface pins.
#define	AUDIO_RESET_GPIO_PORT   GPIOD
#define	AUDIO_RESET_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	AUDIO_RESET_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	CODEC_AUDIO_POWER_OFF()   HAL_GPIO_WritePin(AUDIO_RESET_GPIO_PORT, AUDIO_RESET_PIN, GPIO_PIN_RESET)
#define	CODEC_AUDIO_POWER_ON()   HAL_GPIO_WritePin(AUDIO_RESET_GPIO_PORT, AUDIO_RESET_PIN, GPIO_PIN_SET)
#define	HDMI_CEC_HPD_SINK_PIN   GPIO_PIN_0 /* PE.0 */
	I2C HDMI CEC Interface pins.
#define	HDMI_CEC_HPD_SINK_GPIO_PORT   GPIOE
#define	HDMI_CEC_HPD_SINK_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
#define	HDMI_CEC_HPD_SINK_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
#define	HDMI_CEC_HPD_SOURCE_PIN   GPIO_PIN_7 /* PD.7 */
#define	HDMI_CEC_HPD_SOURCE_GPIO_PORT   GPIOD
#define	HDMI_CEC_HPD_SOURCE_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	HDMI_CEC_HPD_SOURCE_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	HDMI_CEC_LINE_PIN   GPIO_PIN_8 /* PB.8 */
#define	HDMI_CEC_LINE_GPIO_PORT   GPIOB
#define	HDMI_CEC_LINE_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
#define	HDMI_CEC_LINE_CLK_DISABLE()   __HAL_RCC_GPIOB_CLK_DISABLE()
#define	HDMI_CEC_LINE_AF   GPIO_AF6_CEC
#define	HDMI_CEC_IRQn   CEC_IRQn
#define	HDMI_CEC_I2C_ADDRESS   0xA0
Enumerations
enum	Led_TypeDef {   LED1 = 0, LED2 = 1, LED3 = 2, LED4 = 3,   LED_GREEN = LED1, LED_ORANGE = LED2, LED_RED = LED3, LED_BLUE = LED4 }
	LED Types Definition. More...
enum	Button_TypeDef {   BUTTON_TAMPER = 0, BUTTON_KEY = 1, BUTTON_SEL = 2, BUTTON_LEFT = 3,   BUTTON_RIGHT = 4, BUTTON_DOWN = 5, BUTTON_UP = 6 }
	BUTTON Types Definition. More...
enum	ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }
enum	JOYState_TypeDef {   JOY_SEL = 0, JOY_LEFT = 1, JOY_RIGHT = 2, JOY_DOWN = 3,   JOY_UP = 4, JOY_NONE = 5 }
	JOYSTICK Types Definition. More...
enum	JOYMode_TypeDef { JOY_MODE_GPIO = 0, JOY_MODE_EXTI = 1 }
enum	COM_TypeDef { COM1 = 0 }
	COM Types Definition. More...
Functions
uint32_t	BSP_GetVersion (void)
	This method returns the STM32373C EVAL BSP Driver revision.
void	BSP_LED_Init (Led_TypeDef Led)
	Configures LED GPIO.
void	BSP_LED_On (Led_TypeDef Led)
	Turns selected LED On.
void	BSP_LED_Off (Led_TypeDef Led)
	Turns selected LED Off.
void	BSP_LED_Toggle (Led_TypeDef Led)
	Toggles the selected LED.
void	BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Mode)
	Configures push button GPIO and EXTI Line.
uint32_t	BSP_PB_GetState (Button_TypeDef Button)
	Returns the selected button state.
uint8_t	BSP_JOY_Init (JOYMode_TypeDef Joy_Mode)
	Configures all button of the joystick in GPIO or EXTI modes.
JOYState_TypeDef	BSP_JOY_GetState (void)
	Returns the current joystick status.
void	BSP_COM_Init (COM_TypeDef COM, UART_HandleTypeDef *huart)
	Configures COM port.

---

Detailed Description

This file contains definitions for STM32373C_EVAL's Leds, push-buttons and COM port hardware resources.

Author:

MCD Application Team

Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32373c_eval.h.