25.2. tkinter.ttk — Tk themed widgets

Python 3.6.8

previous page next page

25.2. `tkinter.ttk` — Tk themed widgets

The tkinter.ttk module provides access to the Tk themed widget set, introduced in Tk 8.5. If Python has not been compiled against Tk 8.5, this module can still be accessed if Tile has been installed. The former method using Tk 8.5 provides additional benefits including anti-aliased font rendering under X11 and window transparency (requiring a composition window manager on X11).

The basic idea for tkinter.ttk is to separate, to the extent possible, the code implementing a widget’s behavior from the code implementing its appearance.

25.2.1. Using Ttk

To start using Ttk, import its module:

from tkinter import ttk

To override the basic Tk widgets, the import should follow the Tk import:

from tkinter import *
from tkinter.ttk import *

That code causes several tkinter.ttk widgets (Button, Checkbutton, Entry, Frame, Label, LabelFrame, Menubutton, PanedWindow, Radiobutton, Scale and Scrollbar) to automatically replace the Tk widgets.

This has the direct benefit of using the new widgets which gives a better look and feel across platforms; however, the replacement widgets are not completely compatible. The main difference is that widget options such as “fg”, “bg” and others related to widget styling are no longer present in Ttk widgets. Instead, use the ttk.Style class for improved styling effects.

25.2.2. Ttk Widgets

Ttk comes with 17 widgets, eleven of which already existed in tkinter: Button, Checkbutton, Entry, Frame, Label, LabelFrame, Menubutton, PanedWindow, Radiobutton, Scale and Scrollbar. The other six are new: Combobox, Notebook, Progressbar, Separator, Sizegrip and Treeview. And all them are subclasses of Widget.

Using the Ttk widgets gives the application an improved look and feel. As discussed above, there are differences in how the styling is coded.

Tk code:

l1 = tkinter.Label(text="Test", fg="black", bg="white")
l2 = tkinter.Label(text="Test", fg="black", bg="white")

Ttk code:

style = ttk.Style()
style.configure("BW.TLabel", foreground="black", background="white")

l1 = ttk.Label(text="Test", style="BW.TLabel")
l2 = ttk.Label(text="Test", style="BW.TLabel")

For more information about TtkStyling, see the Style class documentation.

25.2.3. Widget

ttk.Widget defines standard options and methods supported by Tk themed widgets and is not supposed to be directly instantiated.

25.2.3.1. Standard Options

All the ttk Widgets accepts the following options:

Option Description

class Specifies the window class. The class is used when querying the option database for the window’s other options, to determine the default bindtags for the window, and to select the widget’s default layout and style. This option is read-only, and may only be specified when the window is created.

cursor Specifies the mouse cursor to be used for the widget. If set to the empty string (the default), the cursor is inherited for the parent widget.

takefocus Determines whether the window accepts the focus during keyboard traversal. 0, 1 or an empty string is returned. If 0 is returned, it means that the window should be skipped entirely during keyboard traversal. If 1, it means that the window should receive the input focus as long as it is viewable. And an empty string means that the traversal scripts make the decision about whether or not to focus on the window.

style May be used to specify a custom widget style.

Option	Description
class	Specifies the window class. The class is used when querying the option database for the window’s other options, to determine the default bindtags for the window, and to select the widget’s default layout and style. This option is read-only, and may only be specified when the window is created.
cursor	Specifies the mouse cursor to be used for the widget. If set to the empty string (the default), the cursor is inherited for the parent widget.
takefocus	Determines whether the window accepts the focus during keyboard traversal. 0, 1 or an empty string is returned. If 0 is returned, it means that the window should be skipped entirely during keyboard traversal. If 1, it means that the window should receive the input focus as long as it is viewable. And an empty string means that the traversal scripts make the decision about whether or not to focus on the window.
style	May be used to specify a custom widget style.

25.2.3.2. Scrollable Widget Options

The following options are supported by widgets that are controlled by a scrollbar.

Option Description

xscrollcommand
Used to communicate with horizontal scrollbars.

When the view in the widget’s window change, the widget will generate a Tcl command based on the scrollcommand.

Usually this option consists of the method Scrollbar.set() of some scrollbar. This will cause the scrollbar to be updated whenever the view in the window changes.

yscrollcommand Used to communicate with vertical scrollbars. For some more information, see above.

Option	Description
xscrollcommand	Used to communicate with horizontal scrollbars. When the view in the widget’s window change, the widget will generate a Tcl command based on the scrollcommand. Usually this option consists of the method `Scrollbar.set()` of some scrollbar. This will cause the scrollbar to be updated whenever the view in the window changes.
yscrollcommand	Used to communicate with vertical scrollbars. For some more information, see above.

25.2.3.3. Label Options

The following options are supported by labels, buttons and other button-like widgets.

Option Description

text Specifies a text string to be displayed inside the widget.

textvariable Specifies a name whose value will be used in place of the text option resource.

underline If set, specifies the index (0-based) of a character to underline in the text string. The underline character is used for mnemonic activation.

image Specifies an image to display. This is a list of 1 or more elements. The first element is the default image name. The rest of the list if a sequence of statespec/value pairs as defined by Style.map(), specifying different images to use when the widget is in a particular state or a combination of states. All images in the list should have the same size.

compound
Specifies how to display the image relative to the text, in the case both text and images options are present. Valid values are:

text: display text only

image: display image only

top, bottom, left, right: display image above, below, left of, or right of the text, respectively.

none: the default. display the image if present, otherwise the text.

width If greater than zero, specifies how much space, in character widths, to allocate for the text label, if less than zero, specifies a minimum width. If zero or unspecified, the natural width of the text label is used.

Option	Description
text	Specifies a text string to be displayed inside the widget.
textvariable	Specifies a name whose value will be used in place of the text option resource.
underline	If set, specifies the index (0-based) of a character to underline in the text string. The underline character is used for mnemonic activation.
image	Specifies an image to display. This is a list of 1 or more elements. The first element is the default image name. The rest of the list if a sequence of statespec/value pairs as defined by `Style.map()`, specifying different images to use when the widget is in a particular state or a combination of states. All images in the list should have the same size.
compound	Specifies how to display the image relative to the text, in the case both text and images options are present. Valid values are: text: display text only image: display image only top, bottom, left, right: display image above, below, left of, or right of the text, respectively. none: the default. display the image if present, otherwise the text.
width	If greater than zero, specifies how much space, in character widths, to allocate for the text label, if less than zero, specifies a minimum width. If zero or unspecified, the natural width of the text label is used.

25.2.3.4. Compatibility Options

Option Description

state May be set to “normal” or “disabled” to control the “disabled” state bit. This is a write-only option: setting it changes the widget state, but the Widget.state() method does not affect this option.

Option	Description
state	May be set to “normal” or “disabled” to control the “disabled” state bit. This is a write-only option: setting it changes the widget state, but the `Widget.state()` method does not affect this option.

25.2.3.5. Widget States

The widget state is a bitmap of independent state flags.

Flag Description

active The mouse cursor is over the widget and pressing a mouse button will cause some action to occur

disabled Widget is disabled under program control

focus Widget has keyboard focus

pressed Widget is being pressed

selected “On”, “true”, or “current” for things like Checkbuttons and radiobuttons

background Windows and Mac have a notion of an “active” or foreground window. The background state is set for widgets in a background window, and cleared for those in the foreground window

readonly Widget should not allow user modification

alternate A widget-specific alternate display format

invalid The widget’s value is invalid

Flag	Description
active	The mouse cursor is over the widget and pressing a mouse button will cause some action to occur
disabled	Widget is disabled under program control
focus	Widget has keyboard focus
pressed	Widget is being pressed
selected	“On”, “true”, or “current” for things like Checkbuttons and radiobuttons
background	Windows and Mac have a notion of an “active” or foreground window. The background state is set for widgets in a background window, and cleared for those in the foreground window
readonly	Widget should not allow user modification
alternate	A widget-specific alternate display format
invalid	The widget’s value is invalid

A state specification is a sequence of state names, optionally prefixed with an exclamation point indicating that the bit is off.

25.2.3.6. ttk.Widget

Besides the methods described below, the ttk.Widget supports the methods tkinter.Widget.cget() and tkinter.Widget.configure().

class tkinter.ttk.Widget

identify(x, y)

Returns the name of the element at position x y, or the empty string if the point does not lie within any element.

x and y are pixel coordinates relative to the widget.

instate(statespec, callback=None, *args, **kw): Test the widget’s state. If a callback is not specified, returns True if the widget state matches statespec and False otherwise. If callback is specified then it is called with args if widget state matches statespec.

state(statespec=None): Modify or inquire widget state. If statespec is specified, sets the widget state according to it and return a new statespec indicating which flags were changed. If statespec is not specified, returns the currently-enabled state flags.

statespec will usually be a list or a tuple.

25.2.4. Combobox

The ttk.Combobox widget combines a text field with a pop-down list of values. This widget is a subclass of Entry.

Besides the methods inherited from Widget: Widget.cget(), Widget.configure(), Widget.identify(), Widget.instate() and Widget.state(), and the following inherited from Entry: Entry.bbox(), Entry.delete(), Entry.icursor(), Entry.index(), Entry.insert(), Entry.selection(), Entry.xview(), it has some other methods, described at ttk.Combobox.

25.2.4.1. Options

This widget accepts the following specific options:

Option Description

exportselection Boolean value. If set, the widget selection is linked to the Window Manager selection (which can be returned by invoking Misc.selection_get, for example).

justify Specifies how the text is aligned within the widget. One of “left”, “center”, or “right”.

height Specifies the height of the pop-down listbox, in rows.

postcommand A script (possibly registered with Misc.register) that is called immediately before displaying the values. It may specify which values to display.

state One of “normal”, “readonly”, or “disabled”. In the “readonly” state, the value may not be edited directly, and the user can only selection of the values from the dropdown list. In the “normal” state, the text field is directly editable. In the “disabled” state, no interaction is possible.

textvariable Specifies a name whose value is linked to the widget value. Whenever the value associated with that name changes, the widget value is updated, and vice versa. See tkinter.StringVar.

values Specifies the list of values to display in the drop-down listbox.

width Specifies an integer value indicating the desired width of the entry window, in average-size characters of the widget’s font.

Option	Description
exportselection	Boolean value. If set, the widget selection is linked to the Window Manager selection (which can be returned by invoking Misc.selection_get, for example).
justify	Specifies how the text is aligned within the widget. One of “left”, “center”, or “right”.
height	Specifies the height of the pop-down listbox, in rows.
postcommand	A script (possibly registered with Misc.register) that is called immediately before displaying the values. It may specify which values to display.
state	One of “normal”, “readonly”, or “disabled”. In the “readonly” state, the value may not be edited directly, and the user can only selection of the values from the dropdown list. In the “normal” state, the text field is directly editable. In the “disabled” state, no interaction is possible.
textvariable	Specifies a name whose value is linked to the widget value. Whenever the value associated with that name changes, the widget value is updated, and vice versa. See `tkinter.StringVar`.
values	Specifies the list of values to display in the drop-down listbox.
width	Specifies an integer value indicating the desired width of the entry window, in average-size characters of the widget’s font.

25.2.4.2. Virtual events

The combobox widgets generates a <<ComboboxSelected>> virtual event when the user selects an element from the list of values.

25.2.4.3. ttk.Combobox

class tkinter.ttk.Combobox

current(newindex=None): If newindex is specified, sets the combobox value to the element position newindex. Otherwise, returns the index of the current value or -1 if the current value is not in the values list.

get(): Returns the current value of the combobox.

set(value): Sets the value of the combobox to value.

25.2.5. Notebook

Ttk Notebook widget manages a collection of windows and displays a single one at a time. Each child window is associated with a tab, which the user may select to change the currently-displayed window.

25.2.5.1. Options

This widget accepts the following specific options:

Option Description

height If present and greater than zero, specifies the desired height of the pane area (not including internal padding or tabs). Otherwise, the maximum height of all panes is used.

padding Specifies the amount of extra space to add around the outside of the notebook. The padding is a list up to four length specifications left top right bottom. If fewer than four elements are specified, bottom defaults to top, right defaults to left, and top defaults to left.

width If present and greater than zero, specified the desired width of the pane area (not including internal padding). Otherwise, the maximum width of all panes is used.

Option	Description
height	If present and greater than zero, specifies the desired height of the pane area (not including internal padding or tabs). Otherwise, the maximum height of all panes is used.
padding	Specifies the amount of extra space to add around the outside of the notebook. The padding is a list up to four length specifications left top right bottom. If fewer than four elements are specified, bottom defaults to top, right defaults to left, and top defaults to left.
width	If present and greater than zero, specified the desired width of the pane area (not including internal padding). Otherwise, the maximum width of all panes is used.

25.2.5.2. Tab Options

There are also specific options for tabs:

Option Description

state Either “normal”, “disabled” or “hidden”. If “disabled”, then the tab is not selectable. If “hidden”, then the tab is not shown.

sticky Specifies how the child window is positioned within the pane area. Value is a string containing zero or more of the characters “n”, “s”, “e” or “w”. Each letter refers to a side (north, south, east or west) that the child window will stick to, as per the grid() geometry manager.

padding Specifies the amount of extra space to add between the notebook and this pane. Syntax is the same as for the option padding used by this widget.

text Specifies a text to be displayed in the tab.

image Specifies an image to display in the tab. See the option image described in Widget.

compound Specifies how to display the image relative to the text, in the case both options text and image are present. See Label Options for legal values.

underline Specifies the index (0-based) of a character to underline in the text string. The underlined character is used for mnemonic activation if Notebook.enable_traversal() is called.

Option	Description
state	Either “normal”, “disabled” or “hidden”. If “disabled”, then the tab is not selectable. If “hidden”, then the tab is not shown.
sticky	Specifies how the child window is positioned within the pane area. Value is a string containing zero or more of the characters “n”, “s”, “e” or “w”. Each letter refers to a side (north, south, east or west) that the child window will stick to, as per the `grid()` geometry manager.
padding	Specifies the amount of extra space to add between the notebook and this pane. Syntax is the same as for the option padding used by this widget.
text	Specifies a text to be displayed in the tab.
image	Specifies an image to display in the tab. See the option image described in `Widget`.
compound	Specifies how to display the image relative to the text, in the case both options text and image are present. See Label Options for legal values.
underline	Specifies the index (0-based) of a character to underline in the text string. The underlined character is used for mnemonic activation if `Notebook.enable_traversal()` is called.

25.2.5.3. Tab Identifiers

The tab_id present in several methods of ttk.Notebook may take any of the following forms:

An integer between zero and the number of tabs
The name of a child window
A positional specification of the form “@x,y”, which identifies the tab
The literal string “current”, which identifies the currently-selected tab
The literal string “end”, which returns the number of tabs (only valid for Notebook.index())

25.2.5.4. Virtual Events

This widget generates a <<NotebookTabChanged>> virtual event after a new tab is selected.

25.2.5.5. ttk.Notebook

class tkinter.ttk.Notebook

add(child, **kw)

Adds a new tab to the notebook.

If window is currently managed by the notebook but hidden, it is restored to its previous position.

See Tab Options for the list of available options.

forget(tab_id): Removes the tab specified by tab_id, unmaps and unmanages the associated window.

hide(tab_id)

Hides the tab specified by tab_id.

The tab will not be displayed, but the associated window remains managed by the notebook and its configuration remembered. Hidden tabs may be restored with the add() command.

identify(x, y): Returns the name of the tab element at position x, y, or the empty string if none.

index(tab_id): Returns the numeric index of the tab specified by tab_id, or the total number of tabs if tab_id is the string “end”.

insert(pos, child, **kw)

Inserts a pane at the specified position.

pos is either the string “end”, an integer index, or the name of a managed child. If child is already managed by the notebook, moves it to the specified position.

See Tab Options for the list of available options.

select(tab_id=None)

Selects the specified tab_id.

The associated child window will be displayed, and the previously-selected window (if different) is unmapped. If tab_id is omitted, returns the widget name of the currently selected pane.

tab(tab_id, option=None, **kw)

Query or modify the options of the specific tab_id.

If kw is not given, returns a dictionary of the tab option values. If option is specified, returns the value of that option. Otherwise, sets the options to the corresponding values.

tabs(): Returns a list of windows managed by the notebook.

enable_traversal()

Enable keyboard traversal for a toplevel window containing this notebook.

This will extend the bindings for the toplevel window containing the notebook as follows:

Control-Tab: selects the tab following the currently selected one.
Shift-Control-Tab: selects the tab preceding the currently selected one.
Alt-K: where K is the mnemonic (underlined) character of any tab, will select that tab.

Multiple notebooks in a single toplevel may be enabled for traversal, including nested notebooks. However, notebook traversal only works properly if all panes have the notebook they are in as master.

25.2.6. Progressbar

The ttk.Progressbar widget shows the status of a long-running operation. It can operate in two modes: 1) the determinate mode which shows the amount completed relative to the total amount of work to be done and 2) the indeterminate mode which provides an animated display to let the user know that work is progressing.

25.2.6.1. Options

This widget accepts the following specific options:

Option Description

orient One of “horizontal” or “vertical”. Specifies the orientation of the progress bar.

length Specifies the length of the long axis of the progress bar (width if horizontal, height if vertical).

mode One of “determinate” or “indeterminate”.

maximum A number specifying the maximum value. Defaults to 100.

value The current value of the progress bar. In “determinate” mode, this represents the amount of work completed. In “indeterminate” mode, it is interpreted as modulo maximum; that is, the progress bar completes one “cycle” when its value increases by maximum.

variable A name which is linked to the option value. If specified, the value of the progress bar is automatically set to the value of this name whenever the latter is modified.

phase Read-only option. The widget periodically increments the value of this option whenever its value is greater than 0 and, in determinate mode, less than maximum. This option may be used by the current theme to provide additional animation effects.

Option	Description
orient	One of “horizontal” or “vertical”. Specifies the orientation of the progress bar.
length	Specifies the length of the long axis of the progress bar (width if horizontal, height if vertical).
mode	One of “determinate” or “indeterminate”.
maximum	A number specifying the maximum value. Defaults to 100.
value	The current value of the progress bar. In “determinate” mode, this represents the amount of work completed. In “indeterminate” mode, it is interpreted as modulo maximum; that is, the progress bar completes one “cycle” when its value increases by maximum.
variable	A name which is linked to the option value. If specified, the value of the progress bar is automatically set to the value of this name whenever the latter is modified.
phase	Read-only option. The widget periodically increments the value of this option whenever its value is greater than 0 and, in determinate mode, less than maximum. This option may be used by the current theme to provide additional animation effects.

25.2.6.2. ttk.Progressbar

class tkinter.ttk.Progressbar

start(interval=None): Begin autoincrement mode: schedules a recurring timer event that calls Progressbar.step() every interval milliseconds. If omitted, interval defaults to 50 milliseconds.

step(amount=None)

Increments the progress bar’s value by amount.

amount defaults to 1.0 if omitted.

stop(): Stop autoincrement mode: cancels any recurring timer event initiated by Progressbar.start() for this progress bar.

25.2.7. Separator

The ttk.Separator widget displays a horizontal or vertical separator bar.

It has no other methods besides the ones inherited from ttk.Widget.

25.2.7.1. Options

This widget accepts the following specific option:

Option Description

orient One of “horizontal” or “vertical”. Specifies the orientation of the separator.

Option	Description
orient	One of “horizontal” or “vertical”. Specifies the orientation of the separator.

25.2.8. Sizegrip

The ttk.Sizegrip widget (also known as a grow box) allows the user to resize the containing toplevel window by pressing and dragging the grip.

This widget has neither specific options nor specific methods, besides the ones inherited from ttk.Widget.

25.2.8.1. Platform-specific notes

On MacOS X, toplevel windows automatically include a built-in size grip by default. Adding a Sizegrip is harmless, since the built-in grip will just mask the widget.

25.2.8.2. Bugs

If the containing toplevel’s position was specified relative to the right or bottom of the screen (e.g. ….), the Sizegrip widget will not resize the window.
This widget supports only “southeast” resizing.

25.2.9. Treeview

The ttk.Treeview widget displays a hierarchical collection of items. Each item has a textual label, an optional image, and an optional list of data values. The data values are displayed in successive columns after the tree label.

The order in which data values are displayed may be controlled by setting the widget option displaycolumns. The tree widget can also display column headings. Columns may be accessed by number or symbolic names listed in the widget option columns. See Column Identifiers.

Each item is identified by a unique name. The widget will generate item IDs if they are not supplied by the caller. There is a distinguished root item, named {}. The root item itself is not displayed; its children appear at the top level of the hierarchy.

Each item also has a list of tags, which can be used to associate event bindings with individual items and control the appearance of the item.

The Treeview widget supports horizontal and vertical scrolling, according to the options described in Scrollable Widget Options and the methods Treeview.xview() and Treeview.yview().

25.2.9.1. Options

This widget accepts the following specific options:

Option Description

columns A list of column identifiers, specifying the number of columns and their names.

displaycolumns A list of column identifiers (either symbolic or integer indices) specifying which data columns are displayed and the order in which they appear, or the string “#all”.

height Specifies the number of rows which should be visible. Note: the requested width is determined from the sum of the column widths.

padding Specifies the internal padding for the widget. The padding is a list of up to four length specifications.

selectmode
Controls how the built-in class bindings manage the selection. One of “extended”, “browse” or “none”. If set to “extended” (the default), multiple items may be selected. If “browse”, only a single item will be selected at a time. If “none”, the selection will not be changed.

Note that the application code and tag bindings can set the selection however they wish, regardless of the value of this option.

show
A list containing zero or more of the following values, specifying which elements of the tree to display.

tree: display tree labels in column #0.

headings: display the heading row.

The default is “tree headings”, i.e., show all elements.

Note: Column #0 always refers to the tree column, even if show=”tree” is not specified.

Option	Description
columns	A list of column identifiers, specifying the number of columns and their names.
displaycolumns	A list of column identifiers (either symbolic or integer indices) specifying which data columns are displayed and the order in which they appear, or the string “#all”.
height	Specifies the number of rows which should be visible. Note: the requested width is determined from the sum of the column widths.
padding	Specifies the internal padding for the widget. The padding is a list of up to four length specifications.
selectmode	Controls how the built-in class bindings manage the selection. One of “extended”, “browse” or “none”. If set to “extended” (the default), multiple items may be selected. If “browse”, only a single item will be selected at a time. If “none”, the selection will not be changed. Note that the application code and tag bindings can set the selection however they wish, regardless of the value of this option.
show	A list containing zero or more of the following values, specifying which elements of the tree to display. tree: display tree labels in column #0. headings: display the heading row. The default is “tree headings”, i.e., show all elements. Note: Column #0 always refers to the tree column, even if show=”tree” is not specified.

25.2.9.2. Item Options

The following item options may be specified for items in the insert and item widget commands.

Option Description

text The textual label to display for the item.

image A Tk Image, displayed to the left of the label.

values
The list of values associated with the item.

Each item should have the same number of values as the widget option columns. If there are fewer values than columns, the remaining values are assumed empty. If there are more values than columns, the extra values are ignored.

open True/False value indicating whether the item’s children should be displayed or hidden.

tags A list of tags associated with this item.

Option	Description
text	The textual label to display for the item.
image	A Tk Image, displayed to the left of the label.
values	The list of values associated with the item. Each item should have the same number of values as the widget option columns. If there are fewer values than columns, the remaining values are assumed empty. If there are more values than columns, the extra values are ignored.
open	True/False value indicating whether the item’s children should be displayed or hidden.
tags	A list of tags associated with this item.

25.2.9.3. Tag Options

The following options may be specified on tags:

Option Description

foreground Specifies the text foreground color.

background Specifies the cell or item background color.

font Specifies the font to use when drawing text.

image Specifies the item image, in case the item’s image option is empty.

Option	Description
foreground	Specifies the text foreground color.
background	Specifies the cell or item background color.
font	Specifies the font to use when drawing text.
image	Specifies the item image, in case the item’s image option is empty.

25.2.9.4. Column Identifiers

Column identifiers take any of the following forms:

A symbolic name from the list of columns option.
An integer n, specifying the nth data column.
A string of the form #n, where n is an integer, specifying the nth display column.

Notes:

Item’s option values may be displayed in a different order than the order in which they are stored.
Column #0 always refers to the tree column, even if show=”tree” is not specified.

A data column number is an index into an item’s option values list; a display column number is the column number in the tree where the values are displayed. Tree labels are displayed in column #0. If option displaycolumns is not set, then data column n is displayed in column #n+1. Again, column #0 always refers to the tree column.

25.2.9.5. Virtual Events

The Treeview widget generates the following virtual events.

Event Description

<<TreeviewSelect>> Generated whenever the selection changes.

<<TreeviewOpen>> Generated just before settings the focus item to open=True.

<<TreeviewClose>> Generated just after setting the focus item to open=False.

Event	Description
<<TreeviewSelect>>	Generated whenever the selection changes.
<<TreeviewOpen>>	Generated just before settings the focus item to open=True.
<<TreeviewClose>>	Generated just after setting the focus item to open=False.

The Treeview.focus() and Treeview.selection() methods can be used to determine the affected item or items.

25.2.9.6. ttk.Treeview

class tkinter.ttk.Treeview

bbox(item, column=None)

Returns the bounding box (relative to the treeview widget’s window) of the specified item in the form (x, y, width, height).

If column is specified, returns the bounding box of that cell. If the item is not visible (i.e., if it is a descendant of a closed item or is scrolled offscreen), returns an empty string.

get_children(item=None)

Returns the list of children belonging to item.

If item is not specified, returns root children.

set_children(item, *newchildren)

Replaces item’s child with newchildren.

Children present in item that are not present in newchildren are detached from the tree. No items in newchildren may be an ancestor of item. Note that not specifying newchildren results in detaching item’s children.

column(column, option=None, **kw)

Query or modify the options for the specified column.

If kw is not given, returns a dict of the column option values. If option is specified then the value for that option is returned. Otherwise, sets the options to the corresponding values.

The valid options/values are:

id

Returns the column name. This is a read-only option.
anchor: One of the standard Tk anchor values.

Specifies how the text in this column should be aligned with respect to the cell.
minwidth: width

The minimum width of the column in pixels. The treeview widget will not make the column any smaller than specified by this option when the widget is resized or the user drags a column.
stretch: True/False

Specifies whether the column’s width should be adjusted when the widget is resized.
width: width

The width of the column in pixels.

To configure the tree column, call this with column = “#0”

delete(*items)

Delete all specified items and all their descendants.

The root item may not be deleted.

detach(*items)

Unlinks all of the specified items from the tree.

The items and all of their descendants are still present, and may be reinserted at another point in the tree, but will not be displayed.

The root item may not be detached.

exists(item): Returns True if the specified item is present in the tree.

focus(item=None): If item is specified, sets the focus item to item. Otherwise, returns the current focus item, or ‘’ if there is none.

heading(column, option=None, **kw)

Query or modify the heading options for the specified column.

If kw is not given, returns a dict of the heading option values. If option is specified then the value for that option is returned. Otherwise, sets the options to the corresponding values.

The valid options/values are:

text: text

The text to display in the column heading.
image: imageName

Specifies an image to display to the right of the column heading.
anchor: anchor

Specifies how the heading text should be aligned. One of the standard Tk anchor values.
command: callback

A callback to be invoked when the heading label is pressed.

To configure the tree column heading, call this with column = “#0”.

identify(component, x, y): Returns a description of the specified component under the point given by x and y, or the empty string if no such component is present at that position.

identify_row(y): Returns the item ID of the item at position y.

identify_column(x)

Returns the data column identifier of the cell at position x.

The tree column has ID #0.

identify_region(x, y)

Returns one of:

region	meaning
heading	Tree heading area.
separator	Space between two columns headings.
tree	The tree area.
cell	A data cell.

Availability: Tk 8.6.

identify_element(x, y)

Returns the element at position x, y.

Availability: Tk 8.6.

index(item): Returns the integer index of item within its parent’s list of children.

insert(parent, index, iid=None, **kw)

Creates a new item and returns the item identifier of the newly created item.

parent is the item ID of the parent item, or the empty string to create a new top-level item. index is an integer, or the value “end”, specifying where in the list of parent’s children to insert the new item. If index is less than or equal to zero, the new node is inserted at the beginning; if index is greater than or equal to the current number of children, it is inserted at the end. If iid is specified, it is used as the item identifier; iid must not already exist in the tree. Otherwise, a new unique identifier is generated.

See Item Options for the list of available points.

item(item, option=None, **kw)

Query or modify the options for the specified item.

If no options are given, a dict with options/values for the item is returned. If option is specified then the value for that option is returned. Otherwise, sets the options to the corresponding values as given by kw.

move(item, parent, index)

Moves item to position index in parent’s list of children.

It is illegal to move an item under one of its descendants. If index is less than or equal to zero, item is moved to the beginning; if greater than or equal to the number of children, it is moved to the end. If item was detached it is reattached.

next(item): Returns the identifier of item’s next sibling, or ‘’ if item is the last child of its parent.

parent(item): Returns the ID of the parent of item, or ‘’ if item is at the top level of the hierarchy.

prev(item): Returns the identifier of item’s previous sibling, or ‘’ if item is the first child of its parent.

reattach(item, parent, index): An alias for Treeview.move().

see(item)

Ensure that item is visible.

Sets all of item’s ancestors open option to True, and scrolls the widget if necessary so that item is within the visible portion of the tree.

selection(selop=None, items=None): If selop is not specified, returns selected items. Otherwise, it will act according to the following selection methods.

Deprecated since version 3.6, will be removed in version 3.8: Using selection() for changing the selection state is deprecated. Use the following selection methods instead.

selection_set(*items): items becomes the new selection.

Changed in version 3.6: items can be passed as separate arguments, not just as a single tuple.

selection_add(*items): Add items to the selection.

Changed in version 3.6: items can be passed as separate arguments, not just as a single tuple.

selection_remove(*items): Remove items from the selection.

Changed in version 3.6: items can be passed as separate arguments, not just as a single tuple.

selection_toggle(*items): Toggle the selection state of each item in items.

Changed in version 3.6: items can be passed as separate arguments, not just as a single tuple.

set(item, column=None, value=None): With one argument, returns a dictionary of column/value pairs for the specified item. With two arguments, returns the current value of the specified column. With three arguments, sets the value of given column in given item to the specified value.

tag_bind(tagname, sequence=None, callback=None): Bind a callback for the given event sequence to the tag tagname. When an event is delivered to an item, the callbacks for each of the item’s tags option are called.

tag_configure(tagname, option=None, **kw)

Query or modify the options for the specified tagname.

If kw is not given, returns a dict of the option settings for tagname. If option is specified, returns the value for that option for the specified tagname. Otherwise, sets the options to the corresponding values for the given tagname.

tag_has(tagname, item=None)

If item is specified, returns 1 or 0 depending on whether the specified item has the given tagname. Otherwise, returns a list of all items that have the specified tag.

Availability: Tk 8.6

xview(*args): Query or modify horizontal position of the treeview.

yview(*args): Query or modify vertical position of the treeview.

25.2.10. Ttk Styling

Each widget in ttk is assigned a style, which specifies the set of elements making up the widget and how they are arranged, along with dynamic and default settings for element options. By default the style name is the same as the widget’s class name, but it may be overridden by the widget’s style option. If you don’t know the class name of a widget, use the method Misc.winfo_class() (somewidget.winfo_class()).

25.2.10.1. Layouts

A layout can be just None, if it takes no options, or a dict of options specifying how to arrange the element. The layout mechanism uses a simplified version of the pack geometry manager: given an initial cavity, each element is allocated a parcel. Valid options/values are:

side: whichside

Specifies which side of the cavity to place the element; one of top, right, bottom or left. If omitted, the element occupies the entire cavity.

sticky: nswe

Specifies where the element is placed inside its allocated parcel.

unit: 0 or 1

If set to 1, causes the element and all of its descendants to be treated as a single element for the purposes of Widget.identify() et al. It’s used for things like scrollbar thumbs with grips.

children: [sublayout… ]

Specifies a list of elements to place inside the element. Each element is a tuple (or other sequence type) where the first item is the layout name, and the other is a Layout.

previous page start next page